• 대한전자공학회논문지SD
• /
• 제37권7호
• /
• pp.17-28
• /
• 2000

DFB(Distributed Feedback) 및 DBR(Distributed Bragg Reflector) 레이저 다이오드의 모델링에 많이 사용되는 시간 변수가 있는 결합 파동 방정식의 수치해를 효율적으로 구할 수 있는 새로운 방법을 제안 하였다. 이 방법에서는 결합 파동 방정식을 두 세트의 방정식으로 분리하여 해석한다. 한 세트의 방정식들에는 위상 인자 및 이득 인자만 포함되고, 다른 한 세트의 방정식에는 결합항만이 포함된다. 본 논문에서 SS-TDM(Split-Step Time Domain Model)이라고 명명한 새로운 수치해석법은 기존의 방법에 비하여 매시간 스텝당 계산 시간은 비슷한 반면에 분할 구간의 수가 10배 이상 적게 하여도 정확한 결과를 얻을 수 있음을 확인하였다.

• 한국광학회지
• /
• 제14권3호
• /
• pp.279-285
• /
• 2003

InGaAsP/InP 비대치 다중 양자우물 구조에서 모드 이득의 이론 및 실험적 해석을 통해 광대역 이득특성을 확인하였고, 여러가지 선폭증가 함수를 적용하여 비대칭 선폭증가 함수가 가장 실험치에 근접한 모델임을 확인하였다. 광대역 이득 대역폭을 얻기 위한 활성층 구조를 설계하여 RWG형 FP-LD를 제작하였고, 공진기 길이가 400 $\mu\textrm{m}$에서 발진개시 전류는 36 ㎃, 주입전류가 33 ㎃에서 -1 ㏈ 이득폭은 45 nm, -3 ㏈ 폭은 80 nm을 얻을 수 있었다.

• Current Optics and Photonics
• /
• 제4권3호
• /
• pp.161-173
• /
• 2020

Colloidal quantum dots (QDs) have gained tremendous attention as a key material for highly advanced display technologies. The performance of QD light-emitting diodes (QLEDs) has improved significantly over the past two decades, owing to notable progress in both material development and device engineering. The brightness of QLEDs has improved by more than three orders of magnitude from that of early-stage devices, and has attained a value in the range of traditional inorganic LEDs. The emergence of high-luminance (HL) QLEDs has induced fresh demands to incorporate the unique features of QDs into a wide range of display applications, beyond indoor and mobile displays. Therefore it is necessary to assess the present status and prospects of HL-QLEDs, to expand the application domain of QD-based light sources. As part of this study, we review recent advances in HL-QLEDs. In particular, based on reports of brightness exceeding 10⁵ cd/㎡, we have summarized the major approaches toward achieving high brightness in QLEDs, in terms of material development and device engineering. Furthermore, we briefly introduce the recent progress achieved toward QD laser diodes, being the next step in the development of HL-QLEDs. This review provides general guidelines for achieving HL-QLEDs, and reveals the high potential of QDs as a universal material solution that can enable realization of a wide range of display applications.

• 한국진공학회지
• /
• 제17권5호
• /
• pp.455-460
• /
• 2008

최근까지 유기박막의 제조에 있어서 진공 증착 혹은 스핀코팅법의 대체방법으로 펄스 레이져 증착법 (PLD: Pulsed laser deposition)에 많은 관심이 되고 있는 실정이다. 본 논문에서는 유기발광소자(OLED)의 제작을 위해 $Alq_3$(aluminato-tris-8-hydroxyquinolate)와 TPD의 유기물을 질소($N_2$)분위기 상태에서 KrF($\lambda$=278 nm) 엑시머 레이저를 이용한 PLD법으로 증착하였고, 증착공정변화에 따른 증착된 박막의 분자 및 광학적 특성의 효과를 PL과 FT-IR등을 이용하여 평가하였다.

• Journal of the Optical Society of Korea
• /
• 제10권2호
• /
• pp.86-90
• /
• 2006

The external feedback effect on the relative intensity noise (RIN) characteristics of blue InAlGaN laser diode has been analyzed taking into account the spontaneous emission noise and the injection current for the high frequency modulation. A Langevin diffusion model was exploited to characterize its relative intensity noise. The simulation parameters were quantitatively evaluated from the optical gain properties of the InAlGaN multiple quantum well active regions by using the multiband Hamiltonian for the strained wurtzite crystals. The extracted parameters were then applied to the rate equations taking into account the external feedback and the high frequency modulation current. The RIN characteristics were investigated to optimize the low frequency laser diode noise characteristics.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.386-391
• /
• 2009

PSPICE circuit parameters of the blue laser diodes grown on wurtzite AlGaInN multiple quantum well structures were extracted directly from the three level rate equations. The relevant optical gain parameters were separately calculated from the self-consistent multiband Hamiltonian. The resulting equivalent circuit model for a blue laser diode was schematically presented, and its modulation characteristics, including the pulse response and the frequency response, have been demonstrated by using a conventional PSPICE.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.764-769
• /
• 2004

In order to reduce operating voltage of the GaN based blue-violet laser diodes, the effect of highly Mg doped GaN layer, which was grown below ohmic contact metals, on contact resistivity as well as operating voltage has been investigated. The addition of the highly Mg doped GaN layer greatly reduced contact resistivity of Pd/Pt/Au ohmic contacts from $5.2 \times {10}^-2 \Omegaㆍ$\textrm{cm}^2$ to 7.5 \times {10}^-4 \Omegaㆍ$\textrm{cm}^2$$. In addition, it also decreased device voltage at 20 mA by more than 3 V. Temperature- dependent sheet resistivity of the highly Mg doped GaN layer suggested that the reduction of the contact resistivity could be attributed to predominant current flow at the interface between the Pd/Pt/Au contacts and p-GaN through a deep level defect band, rather than the valence band.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.309-312
• /
• 2008

We study signal characteristics of the injection-locked Fabry-Perot laser diodes(FP-LDs) for the development of a costeffective WDM-PON solution. The output power and system performance of WDM-PON using injection locked FP-LD are depend on optical characteristics of injection source. The effect of optical power and polarization state of the injection source experimentally investigated. We also measured BER characteristics of the directly modulated FPLD and its power penalty at the BER of $10^{-9}$.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.445-450
• /
• 2019

The influence of high-power laser diode (HPLD) emitter width on the device performance is investigated for 975-nm (In,Ga)(As,P)/(Al,Ga)As broad-area HPLDs, using self-consistent electro-thermal-optical simulation. To guarantee the simulation's accuracy, simulated results are matched with the measured results for a sample HPLD with fitting parameters. The influences of HPLD emitter width on temperature distribution, output power, and the beam product parameter (BPP) are analyzed for three different emitter widths of 50, 70, and $90{\mu}m$. It is found that a device with smaller emitter width exhibits both thermal rollover and thermal blooming at lower output power, but smaller BPP.

• Current Optics and Photonics
• /
• 제3권2호
• /
• pp.164-171
• /
• 2019

Photoluminescence (PL) properties of GaN-based light-emitting diodes (LEDs) were analyzed to study the effects of carrier leakage on the luminescence properties at room temperature. The electrical leakage and PL properties were compared for LEDs showing leakages at forward bias and an LED with an intentional leakage path formed by connecting a parallel resistance of various values. The leakages at the forward bias, which could be observed from the current-voltage characteristics, resulted in an increase in the excitation laser power density for the maximum PL efficiency (ratio of PL intensity to excitation power) as well as a reduction in the PL intensity. The effect of carrier leakages on PL properties was similar to the change in PL properties owing to a reduction of the photovoltage by a reverse current since the direction of the carrier movement under photoexcitation is identical to that of the reverse current. Valid relations between PL properties and electrical properties were observed as the PL properties deteriorated with an increase in the carrier leakage. The results imply that the PL properties of LED chips can be an indicator of the electrical properties of LEDs.