• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.7
• /
• pp.17-28
• /
• 2000

A novel and efficient approach for the numerical solution of time-dependent coupled-wave equations, which are frequently used for the modeling of DFB(Distributed Feedback), DBR(Distributed Bragg Reflector), and FP(Fabry Perot) laser diodes, is proposed. In this approach, the coupled wave equations are split into two sets of equations. One of two sets of equations contains only the phase factors and the other contains only the coupling terms. The separate equations are solved exactly in their split form successively. This new numerical scheme, which we call the SS-TDM(Split-Step Time Domain Model), is found to require an order of magnitude smaller number of subsections to get accurate results than the previous methods while the computation time for each time step is comparable to the previous methods.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.279-285
• /
• 2003

Wide- and flat-gain laser diodes were designed and fabricated from asymmetric multiple quantum well (AMQW) structures which consist of three compressively strained InGaAsP wells of different thicknesses. For a 400 ${\mu}{\textrm}{m}$-long lasers with as-cleaved facets, -1 ㏈ and -3 ㏈ gain bandwidth were 45 nm and 80 nm, respectively. For this AMQW structure, calculated gain spectra with various line broadening functions were compared with experimental results. We confirmed the calculated gain spectra using an asymmetric line broadening function were in good agreement with the measured data.

• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.161-173
• /
• 2020

Colloidal quantum dots (QDs) have gained tremendous attention as a key material for highly advanced display technologies. The performance of QD light-emitting diodes (QLEDs) has improved significantly over the past two decades, owing to notable progress in both material development and device engineering. The brightness of QLEDs has improved by more than three orders of magnitude from that of early-stage devices, and has attained a value in the range of traditional inorganic LEDs. The emergence of high-luminance (HL) QLEDs has induced fresh demands to incorporate the unique features of QDs into a wide range of display applications, beyond indoor and mobile displays. Therefore it is necessary to assess the present status and prospects of HL-QLEDs, to expand the application domain of QD-based light sources. As part of this study, we review recent advances in HL-QLEDs. In particular, based on reports of brightness exceeding 10⁵ cd/㎡, we have summarized the major approaches toward achieving high brightness in QLEDs, in terms of material development and device engineering. Furthermore, we briefly introduce the recent progress achieved toward QD laser diodes, being the next step in the development of HL-QLEDs. This review provides general guidelines for achieving HL-QLEDs, and reveals the high potential of QDs as a universal material solution that can enable realization of a wide range of display applications.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.455-460
• /
• 2008

In recent years, there has been highly interestedin pulsed laser deposition (PLD) method for fabrication of the organic thin films, as an alternative to conventional fabrication method such as vacuum evaporation and spin coating techniques. In this study, organic thin films of $Alq_3$ (aluminato-tris-8-hydroxyquinolate) and TPD for organic light emitting diodes (OLED) were deposited by PLD using KrF excimer ($\lambda$=278 nm) laser in nitrogen atmosphere. Deposited films were evaluated by photoluminescence(PL), Fourier-transform Infrared Spectroscopy (FT-IR) to study the effect of the laser and $N_2$ atmosphere parameters on the structural and optical properties.

• Journal of the Optical Society of Korea
• /
• v.10 no.2
• /
• pp.86-90
• /
• 2006

The external feedback effect on the relative intensity noise (RIN) characteristics of blue InAlGaN laser diode has been analyzed taking into account the spontaneous emission noise and the injection current for the high frequency modulation. A Langevin diffusion model was exploited to characterize its relative intensity noise. The simulation parameters were quantitatively evaluated from the optical gain properties of the InAlGaN multiple quantum well active regions by using the multiband Hamiltonian for the strained wurtzite crystals. The extracted parameters were then applied to the rate equations taking into account the external feedback and the high frequency modulation current. The RIN characteristics were investigated to optimize the low frequency laser diode noise characteristics.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.386-391
• /
• 2009

PSPICE circuit parameters of the blue laser diodes grown on wurtzite AlGaInN multiple quantum well structures were extracted directly from the three level rate equations. The relevant optical gain parameters were separately calculated from the self-consistent multiband Hamiltonian. The resulting equivalent circuit model for a blue laser diode was schematically presented, and its modulation characteristics, including the pulse response and the frequency response, have been demonstrated by using a conventional PSPICE.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.764-769
• /
• 2004

In order to reduce operating voltage of the GaN based blue-violet laser diodes, the effect of highly Mg doped GaN layer, which was grown below ohmic contact metals, on contact resistivity as well as operating voltage has been investigated. The addition of the highly Mg doped GaN layer greatly reduced contact resistivity of Pd/Pt/Au ohmic contacts from $5.2 \times {10}^-2 \Omegaㆍ$\textrm{cm}^2$ to 7.5 \times {10}^-4 \Omegaㆍ$\textrm{cm}^2$$. In addition, it also decreased device voltage at 20 mA by more than 3 V. Temperature- dependent sheet resistivity of the highly Mg doped GaN layer suggested that the reduction of the contact resistivity could be attributed to predominant current flow at the interface between the Pd/Pt/Au contacts and p-GaN through a deep level defect band, rather than the valence band.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.309-312
• /
• 2008

We study signal characteristics of the injection-locked Fabry-Perot laser diodes(FP-LDs) for the development of a costeffective WDM-PON solution. The output power and system performance of WDM-PON using injection locked FP-LD are depend on optical characteristics of injection source. The effect of optical power and polarization state of the injection source experimentally investigated. We also measured BER characteristics of the directly modulated FPLD and its power penalty at the BER of $10^{-9}$.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.445-450
• /
• 2019

The influence of high-power laser diode (HPLD) emitter width on the device performance is investigated for 975-nm (In,Ga)(As,P)/(Al,Ga)As broad-area HPLDs, using self-consistent electro-thermal-optical simulation. To guarantee the simulation's accuracy, simulated results are matched with the measured results for a sample HPLD with fitting parameters. The influences of HPLD emitter width on temperature distribution, output power, and the beam product parameter (BPP) are analyzed for three different emitter widths of 50, 70, and $90{\mu}m$. It is found that a device with smaller emitter width exhibits both thermal rollover and thermal blooming at lower output power, but smaller BPP.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.164-171
• /
• 2019

Photoluminescence (PL) properties of GaN-based light-emitting diodes (LEDs) were analyzed to study the effects of carrier leakage on the luminescence properties at room temperature. The electrical leakage and PL properties were compared for LEDs showing leakages at forward bias and an LED with an intentional leakage path formed by connecting a parallel resistance of various values. The leakages at the forward bias, which could be observed from the current-voltage characteristics, resulted in an increase in the excitation laser power density for the maximum PL efficiency (ratio of PL intensity to excitation power) as well as a reduction in the PL intensity. The effect of carrier leakages on PL properties was similar to the change in PL properties owing to a reduction of the photovoltage by a reverse current since the direction of the carrier movement under photoexcitation is identical to that of the reverse current. Valid relations between PL properties and electrical properties were observed as the PL properties deteriorated with an increase in the carrier leakage. The results imply that the PL properties of LED chips can be an indicator of the electrical properties of LEDs.