• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.224-225
• /
• 2000

Transparent and hard materials such as sapphire are used for many industrial applications as optical windows, hard materials on mechanical contact against abrasion, and substrate materials for opto-electronic semiconductor devices such as blue LED and blue LD etc. The materials should be cut along the proper shapes possible to be used for each application. In case of blue LED, the blue LED wafer should be cut to thousands of blue LED pieces at the final stage of the manufacturing process. The process of cutting the wafer is usually divided into two steps. The wafer is scribed along the proper shapes in the first step. It is inserted between transparent flexible sheets for easy handling. And then, it is broken and split in the next step. Harder materials such as diamonds are usually used to scribe the wafer, while it has a problem of low depth of scribing and abrasion of the harder material itself. The low depth of scribing can induce failure in breaking the wafer along the scribed line. It was also known that the expensive diamond tip should be replaced frequently for the abrasion. (omitted)

• Transactions of Materials Processing
• /
• v.20 no.6
• /
• pp.427-431
• /
• 2011

In general, hot stamped component is trimmed by costly and time consuming laser cutting when the material strength is over 1,500MPa. The aim of this work was to demonstrate that the trimming die life is improved and the trimming load is decreased by lowering the strength of the region to be trimmed. The model employed in this study was a hat shape, similar to the cross section of many hot stamped products. FE-analysis of hot stamping process was performed to evaluate the effect of tool shape on cooling rate at the area to be trimmed. The best tool shape was thus identified, which created slower cooling and lower hardness at the region to be trimmed. The wear at the cutting tool edge was also reduced.

• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.74-78
• /
• 2007

Much interests has been drawn for noble micro-engineering processes for the continuous size reduction on bulk materials from the field of micro-electronics with much downsized IC chips. A traditional microprocessing based on mechanical blade as well as a relatively long pulsed laser usually influence the physico-chemical properties of intact materials when the techniques are applied to process materials with a spatial resolution less than 10 microns. Meanwhile, ultrafast laser pulses are known to exhibit a very small heat-affect zone(HAE) compared to the traditional laser processing and to be applicable for the new functional materials with high performance in optical and electrical properties. In this report, we will review in brief the recent research works on the enhancement of micro-cutting speed of thin silicon wafer as well as the formation of Ge nanostructures based on ultrafast laser pulses.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.12
• /
• pp.1171-1176
• /
• 2012

The selective patterning of a carbon nanotube (CNT) forest on a Si substrate has been performed using a femtosecond laser. The high shock wave generated by the femtosecond laser effectively removed the CNTs without damage to the Si substrate. This process has many advantages because it is performed without chemicals and can be easily applied to large-area patterning. The CNTs grown by plasma-enhanced chemical vapor deposition (PECVD) have a catalyst cap at the end of the nanotube owing to the tip-growth mode mechanism. For the application of an electron emission and biosensor probe, the catalyst cap is usually removed chemically, which damages the surface of the CNT wall. Precise control of the femtosecond laser power and focal position could solve this problem. Furthermore, selective CNT cutting using a femtosecond laser is also possible without any phase change in the CNTs, which is usually observed in the focused ion beam irradiation of CNTs.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.246-254
• /
• 2016

Nowadays, 3 dimentional (3D) printing, especially Direct Metal Laser Sintering (DMLS) system is used in dentistry. DMLS system has recently been introduced for fabrication metal framework for metal ceramic crowns to overcome the disadvantages of the casting method and computer aided design/computer aided manufacturing (CAD/CAM) milling system. DMLS system uses a high-temperature laser beam to selectively heat a substructure metal powder based on the CAD data with the framework design. A thin layer of the beamed area becomes fused, and the metal framework is completed by laminating these thin layers. Utilizing DMLS system to fabricate fixed prostheses is expected to achieve free-from shaping without mold and limitations from cutting tools, fabricate prostheses with complex geometry, prevent distortion and fabrication defects that inherent to conventional fabrication methods. The purpose of this case report is to demonstrate various fixed prostheses such as long span fixed prostheses, post to achieve satisfactory results in functional and esthetic aspects.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.982-988
• /
• 2013

With conventional positioning apparatus, it is very difficult to simultaneously achieve the desired driving range and precision at the sub-micrometer level. Generally, lead screw and friction drive, etc., have been used as servo control systems. These have large driving ranges, and high-speed positioning is feasible. In this study, we present a global servo system controlled by a laser interferometer acting as a displacement measurement sensor for achieving positioning accuracy at the sub-micrometer level.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.82-95
• /
• 1992

There is the high interest for sensing of tool wear with the aim of controlling machine tools productivity from the point of view of qualitity. Difficulties in this measurement are also known. This study is on the development of measurement setup for crater wear by CCD image inturning. In this study, the crater wear measurement system consists of the He-Ne gas laser, diffraction grating. CCD camera, noise filter, slit, microcomputer, diverging lens, converging lens and so on. He-Ne laser beam passes through a diverging lens and a diffraction grating is positioned properly. A converging lens focuses so that the interference fringes can be obtained on the crater wear. Performance test revealed that the developed image technique provides precise, absolute tool-wear quantification and reduces human measurement errors. The results obtained are as follows 1. The digitizing of one image requires less than 2ses. 2. It can give detailed information on crater wear with limited times and errors 3. All parameters required by specification are easily obtained for several points of the cutting edge.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.12
• /
• pp.1227-1235
• /
• 2013

Ceramic materials are classified by oxide, nitride and carbide material and have high brittleness, strength and hardness. Ceramic materials are strong in compression but weak in shearing and tension. This review paper has focused on technology trends and mechanism analysis of ceramics removal machining. The ceramic materials have superior mechanical, physical and chemical properties, but it is very hard to machining and the use of ceramics has been limited because of high strength and brittleness. In this paper, technology trends of ceramic removal-machining was introduced for types of machining technology, abrasive machining, cutting process, laser machining and so on.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1740-1743
• /
• 2002

This paper presents the basic concept of a Solid Freeform Fabrication System using a rapid prototyping procedure. The system can fabricate a ceramic model by laser cutting, accumulating, laminating and sintering of each slice. The system is mainly equipped with a laser apparatus, an x-y table, a material transfer system, and an electric oven. The system could fabricate a small object with smooth surface within comparatively short period of time. The system has also shown its effectiveness in terms of the direct application of the object without the secondary mechanical process. The fabricated sample could directly be applied and used to fairly wide practical areas.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.231-238
• /
• 1993

Mold-marking industries currently demands to reduce the tooling costs and time in mold making and to improve the productivity and quality in injection molding process. These problems can be easily solved by the laminated injection mold which is made by laser cutting metal sheets and bonding them by the brazing. Comparing with the conventional mold making technology which mainly depends on the machining, the new thchnology enables an arvitary design of cooling circuit whithout any restrictions of geometry. Therefore, it will offer high production tata of the injection molding processes. This paper evaluates the conventional and laminated injection mold making processes with a simple molding geometry, and also the cooling efficienty of the kinds of mold with the filling and cooling analyses. The results show that the laminated injection mold process takes much shorter time in tooling and cooling, and distributes temperatures more uniformly than the conventional one.