• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.579-582
• /
• 2002

In acquiring the surface information of a part, two types of measuring machines have been used: contact type and non-contact type. Since each measuring device has the pres and cons, an integrated measuring system is proposed to acquire the optimal point data. In order to implement the integrated measuring system, the relationship of coordinate systems between each measuring device should be established. In this paper, a new datum fixture and a calibration method for the multiple-sensor measuring system are proposed. The datum fixture is designed to interface two machines, a CMM and a laser scanner. The position of the datum fixture is calibrated by the axis information off motorized rotation stage which is used for a part setup.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.133-140
• /
• 2011

In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.

• 제어로봇시스템학회논문지
• /
• 제20권10호
• /
• pp.1051-1056
• /
• 2014

In this paper, we introduce an intelligent robotic arc welding system which exploits sensors like as LVS (Laser Vision Sensor), Hall effect sensor, voltmeter and so on. The use of industrial robot is saturated because of its own limitation, and one of the major limitations is that industrial robot cannot recognize the environment. Lately, sensor-based environmental awareness research of the industrial robot is performed actively to overcome such limitation, and it can expand application field and improve productivity. We classify the sensor-based intelligent arc welding robot system by the goal and the sensing data. The goals can be categorized into detection of a welding start point, tracking of a welding line and correction of a torch deformation. The Sensing data can be categorized into welding data (i.e. current, voltage and short circuit detection) and displacement data (i.e. distance, position). This paper covers not only the explanation of the each category but also its advantage and limitation.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.151-162
• /
• 2004

Current methods for construction site modeling employ large, expensive laser range scanners that produce dense range point clouds of a scene from different perspectives. Days of skilled interpretation and of automatic segmentation may be required to convert the clouds to a finished CAD model. The dynamic nature of the construction environment requires that a real-time local area modeling system be capable of handling a rapidly changing and uncertain work environment. However, in practice, large, simple, and reasonably accurate embodying volumes are adequate feedback to an operator who, for instance, is attempting to place materials in the midst of obstacles with an occluded view. For real-time obstacle avoidance and automated equipment control functions, such volumes also facilitate computational tractability. In this research, a human operator's ability to quickly evaluate and associate objects in a scene is exploited. The operator directs a laser range finder mounted on a pan and tilt unit to collect range points on objects throughout the workspace. These groups of points form sparse range point clouds. These sparse clouds are then used to create geometric primitives for visualization and modeling purposes. Experimental results indicate that these models can be created rapidly and with sufficient accuracy for automated obstacle avoidance and equipment control functions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.280-283
• /
• 2003

In this paper, there was finding laser beam focal length using the camera at the work with laser preprocess. A process have some similarity that the laser direct writing was condition of unused other light source in order to a partical object of working substrate, so we worked finding focal length using yellow light. As we found focal lengths from three points of substrate edges, The focal length of all substrates was able to be computed by calculating a plane equation using these three point. Also we make a device and software that can automatically perform all of the processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.391-395
• /
• 2002

This paper described about the ultra-precision profile measurement of aspheric surfaces using contact probing technique. A contact probe has been designed as a sensing device to obtain measuring resolutions in nanometer regime utilizing a leaf spring mechanism and a capacitive-type sensor. The contact probe is attached on the z-axis during measurement while aspheric objects are supported on the single point diamond turning machine(SPDTM). The machine xz-axis motions are monitored by a set of two orthogonal plane mirror type laser interferometers. Experimental results show that the contact probing technique developed of On-machine Measurement System in this investigation is capable of providing a repeatability of 20 nanometers with a $\pm$20 uncertainty of 300 nanometers.

• 한국지반환경공학회 논문집
• /
• 제15권12호
• /
• pp.71-77
• /
• 2014

집중호우는 사면의 붕괴와 사회 기반시설물의 파괴 등을 포함하는 다수의 재해를 유발한다. 이러한 관점에서 강우재현 원심모형실험은 지반구조물의 안정성을 평가하기 위한 합리적인 수단이 될 수 있다. 원심모형실험에서 모형의 변위를 취득하기 위하여 일반적으로 LVDT 또는 레이저 변위계가 사용된다. 그러나 강우모사 시 LVDT는 모형지반으로의 과다 침윤의 문제가 있으며, 레이저 변위계는 레이저의 산란에 의해 계측치의 정확성이 저하된다. 따라서 본 연구에서는 강우재현 원심모형실험에 적용하기 위한 수평변위 계측장치를 개발하였다. 본 연구를 통하여 탄성의 박철판과 스트레인 게이지를 이용하여 제작된 본 장치는 관입을 위한 말단부를 고정시켜 수행한 검정 결과로부터 정확한 변위-변형률 관계를 나타냄을 확인하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.681-682
• /
• 2016

In this study we propose a novel approach to segment a terrain in two parts: ground and none-ground. The terrain is gained by a multi-channel 3D laser range sensor. We process each vertical line in each frame data. The vertical line is bounded by the sensor's position and a point in the largest circle of the frame. We consider each pair of two consecutive points in each line to find begin-ground and end-ground points. All points placed between a begin-ground point and an end-ground point are ground ones. The other points are none-ground. After examining all vertical lines in the frame, we obtain the terrain segmentation result.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.119-126
• /
• 1995

This paper presents a non-contact measuring system using one point measuring method to measure surface profiles of dies and clay models for practical use in the field of production engineering. The system has a laser beam probe similar to a measuring probe in a contact measuring system and CCD linear sensor used to detect 300mm measurement range, displacement of measured surfaces, from an origin. There is no mechanical interference between this measuring system and a measured surface in this system. In this measuring system, it was needed 500-600ms including data processing time to measure one point. The experiments showed that the standard deviation was 800 .mu.m and the reproducibility was also 100-210 .mu. m.

• 융합신호처리학회논문지
• /
• 제11권4호
• /
• pp.338-344
• /
• 2010

선박 블록의 용접 공정에서는 용접선의 양쪽 끝이 벽에 의해 막혀있는 경우가 많다. 본 연구에서는 이러한 벽이 있는 환경에서 맞대기 용접의 자동화를 위한 용접선 검출 시스템을 개발하였다. 용접선 검출 시스템은 벽에서 캐리지의 위치를 측정하고, 초층의 용접선을 검출하게 된다. 시스템은 레이저 변위센서와 초음파센서로 구성되어 있다. 레이저 변위센서는 모터에 의해 회전 왕복 운동하며 용접 모재까지의 거리를 측정하게 되고, 초음파센서는 양쪽 벽면까지의 거리를 측정한다. 초음파센서로 측정된 거리정보를 활용하여 용접선의 X(주행)좌표와 용접 시작 및 끝 위치를 판별한다. 그리고 레이저 변위센서에 의해 측정된 거리정보와 센서의 자세정보를 활용하여 용접선의 Y(위빙), Z(높이)좌표를 검출하게 된다. 용접선 검출 시스템은 용접 캐리지와 독립적인 구동을 위해 DSP를 이용하여 별도의 제어기를 구성하였다. 용접 도중 용접선 검출 시스템과 용접 토치(Torch)와 간섭을 피하고, 측정 불가능한 구간이 발생하지 않도록 용접선 검출 시스템을 캐리지의 양쪽에 부착할 수 있게 설계하였다. 최종적으로 용접 캐리지에 부착하고 실험을 수행하여 개발된 용접선 검출 시스템의 효용성을 확인하였다.