• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.353-356
• /
• 2002

Planar laser induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Preliminary investigation was performed to measure quantitative air excess ratio distribution in an engine fueled with LPG. It is known that fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone was excited by KrF excimer laser (248nm) and its fluorescence image was acquired by ICCD camera with a cut-of filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile was suggested. Raw images were divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which was taken by a calibration process, were converted to air excess ratio distribution. This investigation showed instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.236-246
• /
• 2004

레이저 형광법을 이용하여 초기 인접면 우식증을 탐지할 수 있는지의 여부와 그 탐지 감도를 평가하여 인접면 우식증의 진단에 활용가능한지의 여부를 규명하기 위하여 사람의 치아를 사용하여 다양한 깊이의 인공우식병소를 유발시키고 이를 가시광선 투과법에 의한 시진, 교익 방사선사진 촬영, 레이저 형광법, 광활성 염료를 이용한 레이저 형광법 등으로 관찰하여 검사법 간의 일치도, 상관관계, 병소 깊이에 따른 광밀도 등을 분석하여 다음과 같은 결과를 얻었다. 1. 탈회시간과 각 검사법들과 일치도 검사에서 시진의 경우 tau-c 값이 0.08로 탈회시간에 따른 시진의 검사 수치가 일치하지 않았으나 교익 방사선사진, 레이저 형광법, 광활성 염료를 이용한 레이저 형광법의 tau-c 값은 각각 0.60, 0.48, 0,64로 일치하는 것으로 나타났다. 2. 탈회시간에 따른 병소깊이와 각 검사법 간의 상관관계는 광활성 염료를 이용한 레이저 형광법$({\gamma}=0.51)$, 레이저 형광 법$({\gamma}=0.43)$, 교익 방사선사진$({\gamma}=0.35)$, 시진$({\gamma}=0.33)$ 순으로 높았으며 광활성 염료를 이용한 레이저 형광법과 레이저 형광법은 탈회 시간과 상관관계가 있었다(P<0.05). 3. 교익 방사선사진을 기준 검사법으로 한 레이저 형광법과 광활성 염료를 이용한 레이저 형광법의 진단학적 민감도는 각각 67%, 100%였으며 특이도는 57%, 11%로 민감도에 비해 상대적으로 낮게 나타났다. 4. 병소의 깊이에 따른 병소 표면에서의 건전 치질과 우식 치질 사이의 광밀도의 차이(DFR)는 광활성 염료를 이용한 레이저 형광법이 레이저 형광법에 비해 크게 나타났으며(P<0.05) 병소 깊이의 변화에 따른 광밀도 변화는 레이저 형광법의 경우 유의한 변화를 보이는데 반해 광활성 염료를 이용한 레이저 형광법에서는 변화를 보이지 않았다. 이상의 결과를 종합하면 초기 인접면 우식증의 진단에 있어 레이저 형광법과 광활성 염료를 이용한 레이저 형광법은 교익 방사선사진에 뒤지지 않은 진단능을 가지고 있으나 우식 병소의 정성적인 분석뿐 아니라 정량적 분석이 가능한지의 여부는 향후 더 많은 연구가 필요하리라 사료된다.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.313-324
• /
• 1997

The aim of the present study was to describe an safe and convenient method for the early detection of enamel caries using laser fluorescence. Fluorescence from natually carious lesion of human teeth illuminated by an argon laser(488nm) was observed and photographed using barrier filter. Intact enamel was found to fluorescence with a yellowish light. Whereas, incipient caries lesions in the enamel were dearly visible as dark areas in contrast to the fluorescence surroundings. For evaluation of accuracy of this method, lesion depth measured by the laser fluorescence in light microscope was compared with that polarizing microscope. The results from the present study can be summarized as follows : 1. Enamel caries of smooth surface was observed as pale white spot and undefined outline in ordinary light. Whereas, lesion was clearly visible as dark spot in laser fluorescence. 2. There was no difference between ordinary light view and laser fluorescence in occlusal surface and interproximal surface. 3. There was no significant difference between the lesion depth observed by laser fluorescence with light microscope and polarizing microscope. Apparent correlation exists between two groups.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.24-29
• /
• 1995

A laser system and signal aquisition system to use a laser-induced fluorescence technique were arranged to measure NO concentration. To identify the NO fluorescence signal, verification of the fluorescence was performed through use of comparison of the signals taken both in a undoped and doped calibration flames. Finally, the spatial NO number densities in partially premixed flames were found as a function of fuel-tube equivalence ratio(${\phi}_c$) and overall equivalence ratio(${\phi}_o$).

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.554-561
• /
• 2021

Indocyanine green (ICG) is a cyanine dye that has been used in medical diagnostics based on fluorescence imaging, and in medical therapy based on the photothermal effect. It is important to systematically understand the photothermal effect and fluorescence characteristics of ICG simultaneously. By varying a number of conditions such as laser power density, laser irradiation wavelength, concentration of ICG solution, and exposure time of laser irradiation, the intensity properties of fluorescence and the temperature change induced by the photothermal effect are measured simultaneously using a charge-coupled-device camera and a thermal-imaging camera. The optimal conditions for maximizing the photothermal effect are determined, while maintaining a relatively long lifetime and high efficiency of the fluorescence for fluorescence imaging. When the concentration of ICG is approximately 50 ㎍/ml and the laser power density exceeds 1.5 W/cm², the fluorescence lifetime is the longest and the temperature induced by the photothermal effect rapidly increases, exceeding the critical temperature sufficient to damage human cells and tissues. The findings provide useful insight into the realization of effective photothermal therapy, while also specifying the site to be treated and enabling real-time treatment monitoring.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.323-330
• /
• 2004

본 연구는 레이저 형광을 치아의 인접면에 적용하여 임상에서 초기 인접면 우식증의 감별에 레이저의 이용가능성을 평가하는데 그 목적이 있다. 염료와 레이저 형광법의 인접면 우식증 탐지효과를 평가하기 위해 조선대학교 소아치과에 내원한 아동 중 유구치의 탈락이 없으며 인접면의 수복치료를 받지 않은 $3{\sim}9$세 사이의 어린이 30명을 대상으로 하였으며, 시진, 교익 방사선사진, 레이저 형광법, 염료와 레이저 형광법을 이용해 관찰한 결과를 비교하여 다음과 같은 결과를 얻었다. 1. 인접면 우식증의 교익 방사선 사진검사와 시진, 레이저 형광법, 염료와 레이저 형광법 사이에서 모두 높은 상관 관계(r=0.725-0.911)를 보였다(p<0.05). 2. 인접면 우식증의 교익 방사선사진 검사와 각 검사법간의 일치도(kappa치)는 각각 시진이 0.451 레이저 형광법이 0.683, 염료와 레이저 형광법이 0.772로 가장 일치도가 높았다. 이상의 결과를 종합해 보면 교익 방사선사진 검사법과 염료와 레이저 형광법 검사 수치의 상관관계가 진단학적 일치도가 높아 레이저 형광법이 향후 교익방사선 사진 검사법을 대치 할 수 있는 인접면 우식증 검사법으로 사료된다.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.109-118
• /
• 1999

The aim of this study was to evaluate the optical density of laser fluorescence for detection of incipient caries. Prepared and polished bovine enamel specimens were demineralized in a STPP solution for varying periods of time between 3 hrs. and 60 hrs. with an area of sound enamel retained on each specimen. The randomized specimens were analyzed for optical density of enamel demineralization using laser fluorescence. The specimens were sectioned and examined lesion depth by polarizing light microscope. Results were analyzed statistically with SAS program. The results from this study can be summarized as follows: 1. Optical density measured by laser fluorescence and lesion depth measured by polarizing light microscope was increased as demineralization time was increased(p<0.001). 2. Between optical density measured by laser fluorescence and lesion depth measured by polarizing light microscope was correlated highly(${\gamma}{\geq}0.74956$, p<0.001). 3. Regressive equation was obtained in this study as follows. Y=[X-0.260851]/0.000271(R-square:0.5618, p<0.001) (X:DENSITY, Y:DEPTH) In summary, optical density measured by laser fluorescence would be within the range of possibility to quantitatively presume demineralization amount of incipient caries lesion

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.167-174
• /
• 1997

The penetration depth and the size distribution of the droplets of fuel sprays are important in the operation of spark-ignition MPI engines. A fluorescence/scattering image technique for droplet sizing was applied to measure th edroplet size distribution in non-evaporating gasoline sprays. The fluorescence and scattering lights were imaged simultaneously by the two-dimensional visualization system composed of a laser sheet, a doubling prism, optical filters, and a CCD camera. Quantitative droplet size distributions were extracted from evaluating the ratio of the two light densities. The mean droplet size measured by the fluorescence/scattering technique was compared with the result obtained by the enlarged photographs of droplets. The fluorescence/scattering image technique also gives the useful information of the characteristics of droplet impingement in a inclined wall.

• 한국응용과학기술학회지
• /
• 제23권4호
• /
• pp.340-346
• /
• 2006

The influences of fluorescence, scattering, and flocculation in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it has been studied the molecular properties by the spectroscopy of laser induced fluorescence (LIF). The effects of optical properties in scattering media have been found by the optical $parameters({\mu}_s,\;{\mu}_a,\;{\mu}_t)$. Flocculation is an important step in many solid-liquid separation processes and is widely used. When two particles approach each other, interactions of several colloid particles can come into play which may have major effect on the flocculation and LIF process, The value of scattering coefficient ${\mu}_s$ is large by means of the increasing particles of scatterer it has been found that the slope decays exponentially as a function of distance from laser source to detector. It may also aid in designing the best model for oil chemistry, biopharmaceutical products, laser medicine and application of medical engineering on LIF and coagulation in particle transport mode.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.98-99
• /
• 2012

Deposition of thin films using magnetron sputtering plasmas is a well-developed, classical technology. However, detailed investigations using advanced diagnostics are insufficient in magnetron sputtering, in comparison with plasma-aided dry etching and plasma-enhanced chemical vapor deposition. In this talk, we will show examples of diagnostic works on magnetron sputtering employing metal targets. Diagnostic methods which have fine spatial resolutions are suitable for magnetron sputtering plasmas since they have significant spatial distributions. We are using two-dimensional laser-induced fluorescence spectroscopy, in which the plasma space is illuminated by a tunable laser beam with a planer shape. A charge-coupled device camera with a gated image intensifier is used for taking the picture of the image of laser-induced fluorescence formed on the planer laser beam. The picture of laser-induced fluorescence directly represents the two-dimensional distribution of the atom density probed by the tunable laser beam, when an intense laser with a relatively wide line-width is used. When a weak laser beam with a relatively narrow linewidth is used, the laser-induced fluorescence represents the density distribution of atoms which feel the laser wavelength to be resonant via the Doppler shift corresponding to their velocities. In this case, we can obtain the velocity distribution function of atoms by scanning the wavelength of the laser beam around the line center.