• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1663-1667
• /
• 2003

This thesis is on tile development of LD(Laser Diode) chip tester and the control system based on graphical programming language(LabVIEW) to control the equipment. The LD chip tester is used to test the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the receiver(optic fiber) are very small. Therefore, in order to test each chip precisely, this tester needs high accuracy. However each motion part of the tester could not accomplish hish accuracy due to the limit of the mechanical performance. Hence. an image processing with machine vision was carried out in order to compensate for the error. and also a load test was carried out so as to reduce tile impact of load on chip while the probing motion device is working. The obtained results were within ${\pm}$5$\mu\textrm{m}$ error.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.30-36
• /
• 2004

The development of LD(Laser Diode) tester and its control system based on the graphical programming language(LabVIEW) is addressed. The ill tester is used to check the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the Detector(optic fiber and photo diode) are very small, therefore the test device needs high accuracy. But each motion part of the test device could not accomplish high accuracy due to the limit of the mechanical performance. So, an image processing with machine vision is proposed to compensate for the error. By adopting our method we can reduce the error of position within $\pm$5$\mu\textrm{m}$.

• 한국정보전자통신기술학회논문지
• /
• 제7권4호
• /
• pp.147-150
• /
• 2014

본 논문은 고속 고출력 레이저 다이오드(Laser Diode: LD) 구동에 사용되는 펄스형 전원장치의 개발에 관하여 논 하였다. 고속 고출력 레이저는 주로 가공기기나 의료기기 등에 응용되고 있어 그 사용 범위가 넓어지는 추세이나 관련된 기술에 대한 연구는 활발히 이루어지지 않은 편이다. 본 연구에서는 고속 고출력 LD의 구동에 적합한 LLC컨버터에 관한 연구를 수행 하였으며 특히 LD의 수명을 고려하여 구동 전류의 주파수를 유지하며 인가되는 전류의 크기를 임계전류를 고려한 방식으로 설계하여 드라이버 설계를 수행하였으며 그 결과를 실험을 통하여 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.415-419
• /
• 2010

A phosphor-conversion white light source is demonstrated using an InGaN-based blue laser diode (LD) and a yellow-emitting phosphor excited by the blue LD. The photometric and colorimetric properties of this blue-LD-based white light source are characterized. When injection current of the LD is 100 mA, luminous flux and luminous efficiency of the white light are found to be over 5 lm and 10 lm/W, respectively. When injection current is >90 mA, luminance is estimated to be larger than 10 Mcd/$cm^2$. In addition, color characteristics of the white light such as chromaticity coordinates, a correlated color temperature, and a color rendering index are found to be quite stable as current and temperature of the LD varies. The demonstrated LD-based white light source is expected to be used in high-brightness illumination applications with good color stability.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.139-146
• /
• 2001

This paper presents a study on heat transfer and residual distortion analysis of laser welded EDFA(Erbium Doped Fiber Amplifier) LD(Laser Diode) Pump using the finite element method. In the production process of LD Pump in light-wave communication system, ferrule and saddle are welded by Nd-YAG laser. These parts experience thermal and mechanical effect during heating and cooling cycle with the laser welding. Thus distortion happens in the laser-welded packaging, and it makes an error in detecting the light signal translate through optical fiber in LD Pump. The amount of final displacement produced by the laser welding is predicted using the finite element method. And the optimal shape of saddle is proposed with the results of numerical analyses to minimize the displacement.

• 한국광학회지
• /
• 제23권5호
• /
• pp.227-232
• /
• 2012

본 논문에서는 RLD (Reflective Laser Diode)와 FBG (Fiber Bragg Grating)가 하이브리드 집적된 LD (이하 FG-LD)의 정적 및 동적 특성을 해석하기 위하여 대신호 시영역 모델링 방법을 구현하였다. FBG의 유효길이 2.1 mm를 포함한 외부 집적 공진기의 길이가 8 m인 경우에 0.44GHz의 동적 주파수 요동과 6.4 GHz 정도의 동적 주파수 요동 결과를 나타내었다. 또한 10 Gbps NRZ 신호의 아이가 크게 오픈된 상태를 잘 유지함을 확인하였다. FG-LD는 50 km 정도의 길이를 커버하는 10 Gbps 급 단일파장 레이저로서의 효용성이 있을 것으로 기대된다.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.65-72
• /
• 2009

Laser interferometry is widely used as a measuring system in many fields because of its high resolution and its ability to measure a broad area in real-time all at once. In conventional laser interferometry, for example out-of-plane ESPI (Electronic Speckle Pattern Interferometry), in plane ESPI, shearography and holography, it uses PZT or other components as a phase shift instrumentation to extract 3-D deformation data, vibration mode and others. However, in most cases PZT has some disadvantages, which include nonlinear errors and limited time of use. In the present study, a new type of laser interferometry using a laser diode is proposed. Using Laser Diode Sinusoidal Phase Modulating (LD-SPM) interferometry, the phase modulation can be directly modulated by controlling the laser diode injection current thereby eliminating the need for PZT and its components. This makes the interferometry more compact. This paper reports on a new approach to the LD (Laser Diode) Modulating interferometry that involves four-frame phase shift method. This study proposes a four-frame phase mapping algorithm, which was developed to have a guaranteed application, to stabilize the system in the field and to be a user-friendly GUI. In this paper, the theory for LD wavelength modulation and sinusoidal phase modulation of LD modulating interferometry is shown. Using modulating laser and research of measurement algorithm does comparison with existent ESPI measurement algorithm. Algorithm measures using GPIB communication through most LabVIEW 8.2. GPIB communication does alteration through PC. Transformation of measurement object measures through modulating laser algorithm that develops. Comparison of algorithm of modulating laser developed newly with existent PZT algorithm compares transformation price through 3-D. Comparison of 4-frame phase mapping, unwrapping, 3-D is then introduced.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.93-100
• /
• 2008

Laser interferometry is widely used as a measuring system in many fields because of its high resolution and ability to measure a broad area in real-time all at once. In conventional LASER interferometry, for example Out-of-plane ESPI(Electronic Speckle Pattern Interferometry), In plane ESPI, Shearography and Holography, it uses PZT or other components as a phase shift instrumentation to extract 3D deformation data, vibration mode and others. However, in most cases PZT has some disadvantages, which include nonlinear errors and limited time of use. In the present study, a new type of LASER interferometry using a laser diode is proposed. Using LASER Diode Sinusoidal Phase Modulating (LD-SPM) interferometry, the phase modulation can be directly modulated by controlling the LASER Diode injection current thereby eliminating the need for PZT and its components. This makes the interferometry more compact. This paper reports on a new approach to the LD Modulating interferometry that involves four-buckets phase shift method. This study proposes a four-bucket phase mapping algorithm, which was developed to have a guaranteed application, to stabilize the system in the field and to be a user-friendly GUI. In this paper, the theory for LD wavelength modulation and sinusoidal phase modulation of LD modulating interferometry is shown. Four-bucket phase mapping algorithm is then introduced.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.698-703
• /
• 2016

We report a new all-optical flip-flop (AOFF) with a quite simple structure, using optical beating in an injection-locked Fabry-Perot laser diode (FP-LD) with optical bistability. While conventional AOFF methods using an injection-locked FP-LD require additional devices such as secondary FP-LDs or polarization controllers for reset operation, the proposed method can be implemented using only a single commercially available FP-LD with set and reset signals. The optical beating induces intensity fluctuations inside the FP-LD, and releases the locking state to the reset state. Even though we demonstrated the AOFF at 100 Mbit/s, we expect that its operation rate could extend to 10 Gbit/s, according to the limit of the FP-LD's frequency response.

• 한국광학회지
• /
• 제7권3호
• /
• pp.266-271
• /
• 1996

본 연구에서는 수직형 LPE방법으로 제작된 InGaAsP/ImP RWG(Ridge Waveguide) MQW(Mutiple Quantum Well)-LD(Laser diode)의 광학적 특성을 조사하여 제작된 LD의 특성과 설계결과를 비교 분석하였다. 광학적 특성 분석결과 제작된 LD가 설계된 데로 측방향 단일모드로 동작하였으며 내부양자효율은 77%, 내부손실은 18$cm^{-1}$ /, 발진파장의 온도특성은 5.5.angs./C.deg.로 나타났다. 이러한 결과들로부터 수직형 LPE방법으로 성장된 에피층의 특성과 MQW의 계면특성이 아주 양호하다는 것을 알 수 있었으며 제작된 RWG MQW-LD의 특성도 양호함을 알 수 있었다.