• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.487-492
• /
• 2009

A large-scaled research project titled "Intelligent Excavating System (IES)" sponsored by Korean government has launched in 2006. An issue of real-time 3D terrain modeling has become a crucial point for successful implementation of IES due to many application limitations of state-of-the-art techniques developed in various high-technology fields. Many feasible technologies such as laser scanning, structured lighting and so on were widely reviewed by professionals and researchers for one year. Various efforts such as literature reviews, interviews, and indoor experiments make us select a structural light technique and stereo vision technique as appropriate techniques for accomplishment of real-time 3D terrain modeling. It, however, revealed that off-the-shelf products of structural light and stereo-vision technique had many technical problems which should be resolved for practical applications in IES. This study introduces diverse methods modifying off-the-shelf package of the structural light method, one of feasible techniques and eventually allowing this technique to be successfully utilized for achieving fundamental research goals. This study also presents many efforts to resolve practical difficulties of this technique considering basic characteristics of excavating operations and particular environment of construction sites. Findings showed in this study would be beneficial for other researchers to conduct new researches for application of vision techniques to construction fields by provision of detail issues about practical application and diverse practical methods as solutions overcoming these issues.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2016

The present study experimentally considers dynamic performance of large floating wave-offshore hybrid power generation platform in extreme conditions. In order to evaluate the motion performance of the large floating hybrid power generation platform, 1/50 scaled model was manufactured. A mooring line was also manufactured, and free-decay and static pull-out tests were carried out to check the mooring model. A mooring line table was introduced to satisfy the water depth, and environmental conditions were checked. Motion responses in regular waves were measured and complicated environmental conditions including wave, wind, and current were applied to see the dynamic performance in extreme/survival conditions. Maximum motion and acceleration were judged following the design criteria, and maximum offset and mooring tension were also checked based on the rule. The characteristics of hybrid power generation platform are discussed based on these data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.397-402
• /
• 2013

In this study, numerical hull form development of a platform supply vessel, a full scale with the overall length of 26.75m, was performed to predict a bare-hull resistance and a large scale of model tests with a 1/10 scaled model were conducted to verify the success of numerical results. Numerical analysis on heave and pitch motion as a function of encounter frequency and ship's speed for the prediction of seakeeping characteristics are also presented. The experiment results of resistance agreed well with numerical analysis. As a result in the motion response characteristics, the heave RAO indicates high values with the range of encounter frequency 1.8~2.0. The Pitch RAO indicates high motion response characteristics at Beaufort scale No. 3 and 4 in rough seas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.283-289
• /
• 2011

As leisure boats become large-scaled and high value-added, their design requirements gradually get more complicated and accordingly their manufacturing processes get more complicated than those of existing ones. Leisure boat builders overseas make efforts to overcome this circumstance by establishing a 3-D model-based design system which is based on the concept of PLM. On the other hand, Korean shipbuilders still remain in the development process of traditional leisure boats which are mainly based on 2-D drawings. There have been some efforts made to have the 3-D model-based design system; however, they belong to a very early stage. This study carried out initial research to apply DMU technology to the development process of leisure boats. It established the design process based on a DMU model and proved its usefulness through a case study on the design of 40-ft class aluminum leisure boats.

• Journal of KIISE:Software and Applications
• /
• v.27 no.1
• /
• pp.13-23
• /
• 2000

As software becomes more complicated and large-scaled, user's demands become more varied and his expectation levels about software products are raised. Therefore it is very important that a software engineer analyzes user's requirements precisely and applies it effectively in the development step. This paper presents a requirements analysis system that reduces and revises errors of requirements specifications analysis effectively. As this system measures the similarity among requirements documents and sentences, it assists users in analyzing the dependency among requirements specifications and finding the traceability, redundancy, inconsistency and incompleteness among requirements sentences. It also extracts sentences that contain ambiguous words. Indexing method for the similarity measurement combines sliding window model and dependency structure model. This method can complement each model's weeknesses. This paper verifies the efficiency of similarity measure techniques through experiments and presents a proccess of the requirements specifications analysis using the embodied system.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.731-740
• /
• 2001

Multi-distributed web cluster model expanding conventional cluster system is the cluster system which processes large-scaled work demanded from users with parallel computing method by building a number of system nodes on open network into a single imaginary network. Multi-distributed web cluster model on the structured characteristics exposes internal system nodes by an illegal third party and has a potential that normal job performance is impossible by the intentional prevention and attack in cooperative work among system nodes. This paper presents the mutual authentication protocol of system nodes through key division method for the authentication of system nodes concerned in the registration, requirement and cooperation of service code block of system nodes and collecting the results and then designs SNKDC which controls and divides symmetrical keys of the whole system nodes safely and effectively. SNKDC divides symmetrical keys required for performing the work of system nodes and the system nodes transmit encoded packet based on the key provided. Encryption packet given and taken between system nodes is decoded by a third party or can prevent the outflow of information through false message.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.573-584
• /
• 2001

Policy-Based Network Management (PBNM) architecture is to meet various needs of network users and to provide effective management facilities in distributed and large scale networks to network managers. In PBNM, network managers perform network management operations by stipulating a set of rules rather than control each network component. On the other hand, providing security services such as authentication, privacy of messages as well as a new flexible and extensible administration framework, SNMPv3 enables network managers to monitor and control the operation of network components more secure way than ever before. Despite of its enhanced security services, SNMPv3 has difficulties in managing distributed, large-scaled network because it does not provide centralized security management facilities. In this paper, we propose a new security model called Role-based Security Management model (RSM) with security management policy to support scalable and centralized security management for SNMP-based networks. Also, the structure and the operation of the security system as well as the efficiency analysis of RSM in terms of security management are also described.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.216-220
• /
• 1996

In the present paper, a new type of DC arc plasma torch is disclosed. The principles of the new magnetic and fluid dynamic controlled large orifice long discharge tunnel plasma torch is discussed. Two series of DC Plasma Jet diamond film deposition equipment have been developed. The 20kW Jet equipped with a $\Phi$70 mm orifice torch is capable of deposition diamond films at a growth rate as high as 40$\mu\textrm{m}$/h over a substrate area of $\Phi$65 mm. The 100kW high power Jet which is newly developed based on the experience of the low power model is equipped with a $\Phi$120 mm orifice torch, and is capable of depositing diamond films over a substrate area of $\Phi$110 mm at growth rate as high as 40 $\mu\textrm{m}$/h, and can be operated at gas recycling mode, which allows 95% of the gases be recycled. It is demonstrated that the new type DC plasma torch can be easily scaled up to even higher power Jet. It is estimated that even by the 100kW Jet, the cost for tool grade diamond films can be as low as less than ＄4/carat.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.452-459
• /
• 2015

It is important to use bench test results in the design process of anti-rolling tanks. Traditional bench tester is usually designed to perform only roll motions about a fixed axis and relatively small so that the viscous effects may not be neglected. Novel bench tester which could adjust the motion center to realize the coupled motion of sway and roll has been devised and manufactured therefore, large scaled bench tester could be utilized for designing the passive anti-rolling tanks. The time history of the reference signal from the rotation sensor of the bench tester have been recorded and processed to determine the phase angle to derive the Response Amplitude Operator(RAO) of the stabilized ship. The breadth of ART tank model should be large up to 2 m to diminish viscous scale effect and the vertical position of the tank can be varied with the ship's center of motion. The periods and the amplitude of roll motion can be varied from 1.5 sec to 5 sec and up to ±20°, respectively. The components of the tester was expressed in three dimensional digital mockup (DMU) and assembled together in the CAD space. The final configuration of the bench tester has been determined by confirming the smooth operation of the moving parts without interference through the animation in CAD space. New analytic logic are introduced for the determination of hydrodynamic moment and phase difference due to fluid motion in ART and verified through the test. The developed bench tester is believed to be effective and accurate for the verification of stabilization effect of ART taking into the consideration of the sway effect in the design stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1190-1198
• /
• 2012

A hot forming of large thick Al plate using a grid-type hybrid die is a process to make a shell plate for the production of a spherical LNG tank. This process is characterized by using a grid-typed die with an additional air cooling system for reducing the cooling time of the heated plate after hot forming. The process consists of the plate's feeding, heating, forming and cooling in detail and each of them is continuously performed along the rail. This paper was designed to propose the analytical and experimental methods for determining the convection and interfacial heat transfer coefficients required in hot forming analysis of Al plate. These values in the analysis are to reproduce numerically the cooling performance of grid-typed die and cooling device. Interfacial heat transfer was obtained from the heat transfer experiments for different pressures and inverse analysis method. To verify the efficiency of the coefficient values obtained from above methods, FE analysis and experiment of the hot spherical-forming process were conducted for a small-scaled model. The convection coefficient was also calculated from flow analysis of air released by cooling device within grid-typed die using ANSYS-CFX.