• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.61-69
• /
• 2022

본 연구에서는 지반조건을 고려한 말둑의 인발저항 성능의 합리적인 평가방법 확립의 일환으로써, 지반의 세립분 함유율 및 구속압 조건에 따른 말뚝과 지반 경계면의 전단특성을 평가하기 위한 대형직접전단시험을 수행하였다. 그 결과, 수직하중이 증가하고 모형지반의 세립분 함유율이 작을수록 전단변형에 따른 전단응력이 크게 발생됨을 알 수 있었다. 그리고 동일한 수직하중과 세립분 함유율 조건에서 말뚝 모형체의 표면이 거칠수록 최대전단응력은 다소 크게 나타났다. 강도정수로써 내부 마찰각과 점착력을 산정하여 분석한 결과, 모형지반의 세립분 함유율이 증가할수록 모형체 경계면에서의 내부마찰각은 감소하였으나 점착력은 증가하는 것을 알 수 있었다. 또한, 말뚝 모형체 표면이 거칠수록 모형지반의 세립분 함유율에 관계 없이 내부마찰각과 점착력은 크게 나타났다.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.8-14
• /
• 2011

RIB(Rigid Inflatable Boat) is widely used for coastal transportation in the commercial use and for ISR(Intelligence, Surveillance, Reconnaissance) in the military use. Since RIB is around 10 meters in length and over 30 knots in speed, its motion characteristics in waves is quite different from a large scale ship. When it turns, large roll occurs and heeling direction is opposite to the large ship's case. Currently, many countries are developing USV(Unmanned Surface Vehicle) of which type is RIB. In order to develop high performance autopilot and way point controller, it is very important to identify RIB's motion characteristics. In this paper, sea trial test results of a 7-meter RIB such as speed, turning, zig-zag, and way point control tests were represented and its resistance and propulsion model was identified by using sea trial data and Savitsky's formula. In addition, the state space model which will be used in the identification of the four-degree-of-freedom dynamics in the next step was formulated and the identification procedure was proposed.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.263-276
• /
• 1999

In this paper, we consider the change request data collected from the system test of a large-scale telecommunication software and analyze the types and causes of failures. And we develop statistical models that incorporate a functional relation between the faults and some software metrics. To this end, we consider three possible regression models including a stepwise regression model and two nonlinear models. Three developed models are evaluated with respect to the predictive quality. We also discuss the advantage of proposed models and the application of our model to a new project.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.768-773
• /
• 2005

Among various joint ventures, International Construction Joint Ventures (ICJVs) have emerged as a popular approach worldwide to developing large scale projects through international participation. A model, based on economic analysis and represented by several hypotheses obtained from the analysis, will be developed. Furthermore, we will empirically test the hypotheses/model using Structural Equation Model (SEM). This research is expected to explain why there exist different organizational forms for ICJVs, and to develop a framework for choosing appropriate forms with respect to various characteristics of ICJVs.

• 한국공간구조학회논문집
• /
• 제16권1호
• /
• pp.65-72
• /
• 2016

Aerodynamic performance of solar wing system has been evaluated through wind tunnel test. The test model has 12 panels, each supported by 2 cables. The panels were installed horizontally flat, and gaps between panels were set constant. Sag ratios of 2% and 5%, and wind directions between $0^{\circ}$ and $90^{\circ}$ were considered. Mass of test model was determined considering the mass of full scale model, and Froude number and Elastic parameter were satisfied by adjusting the mean wind speed. From the wind tunnel test, it was found that the aerodynamic performance of the solar wing system is very dependent on the wind directions and sag ratios. When the sag was 2%, the fluctuating displacements between the wind directions of $0^{\circ}$ and $30^{\circ}$ increase proportionally to the square of the mean wind speed, implying buffeting-like vibration and a sudden increase in fluctuating displacement was found at large mean wind speed for the wind directions larger than $40^{\circ}$. When the wind direction was larger than $60^{\circ}$, a sudden increase was found both at low and large mean wind speed. When the sag ratio is 5%, distribution of mean displacements is different from that of sag ratio of 2%, and the fluctuating displacements show very different trend from that of sag ratio of 2%.

• 한국지반공학회논문집
• /
• 제28권11호
• /
• pp.53-67
• /
• 2012

본 논문에서는 기존에 사용되던 철선 TDR계측선의 문제점을 해결하기 위해 스테인리스 스틸과 열수축튜브를 이용해 개량된 TDR계측선을 개발하여, 함수비에 대한 민감도를 높이고 노이즈를 줄이며 내구성을 향상시켜 TDR시스템의 현장적용성을 높였다. 개량된 TDR계측선을 이용하여 실내에서 포화도 변화실험과 아크릴모형실험을 수행하였으며, 실험결과 별도의 필터링 및 정량화 과정을 거치지 않은 초기 계측 그래프만으로 쉽게 포화, 불포화 및 건조구간을 파악할 수 있었다. 이후 대형 모형제방에 개량된 TDR센서를 설치하여 침투실험을 수행하였으며 그 결과, 실내시험과 같은 명확한 지하수 분포형태 파악이 가능하였으며, 침투 시간경과에 따른 각 구간의 지하수 분포변화를 파악할 수 있었고 손쉽게 모형제방의 침윤선을 작도할 수 있었다.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.465-472
• /
• 2011

Recently, ultra large scale of ship is being ordered continuously and because of that, the accurate prediction of ship maneuverability in design stage becomes important matter. The model test like PMM test or CFD analysis are representative methods for predicting the maneuverability of ship. In this study, the captive model tests were carried out for predicting maneuverability of MOERI container ship(KCS) which is opened to the public using X-Y Carriage of Ocean Engineering Wide Tank of University of Ulsan. Considering the dimensions of tank, 2m class model ship was used for captive model test. CMT(Circular Motion Test) was performed for obtaining purer hydrodynamic coefficients related to yawing velocity. For getting hydrodynamic coefficients which cannot be obtained using CMT, PMM test(Planar Motion Mechanism test) were also performed. The maneuverability prediction results by simulation are compared with those of other research institutes.

• 한국지반공학회논문집
• /
• 제34권4호
• /
• pp.49-55
• /
• 2018

근접굴착 시 지반변위를 억제하여 기존건물의 안정성을 확보하기 위해 굴착공사 중 흙막이벽체의 버팀대에 선행하중을 가하고 그 효과를 확인하였다. 선행하중을 가한 경우와 가하지 않은 경우에 대해서도 대형모형실험을 하였다. 지표면에 건물하중이 없는 경우와 건물하중이 있는 경우 각각 0m, 1D, 2D 에 대해 대형모형실험을 실시하였다. 본 연구에서는 모형실험에는 12m 폭의 기존건물을 축척 1:10으로 사용하였고, 폭 2m, 높이 6m, 길이 4m를 가진 대형토조에서 흙막이벽체와 인접건물의 거동에 대하여 실험을 수행하였다. 그 결과, 흙막이벽체의 버팀대에 선행하중을 작용시켜 흙막이벽체의 수평변위를 억제시켰을때 벽체배면 가상주동활동영역 내에 있는 인접건물의 안정성이 크게 향상되는 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.195-205
• /
• 2001

The mechanical properties of aluminum honeycomb on the direction of axial crushing under quasistatic loading test was investigated. The crushing process was simulated numerically by full-scale finite element models. Simulations reproduce the experimental results both qualitatively as well as quantitatively. From the investigation, we suggested the constitutive model of energy absorbing honeycomb structure for large scale impact analysis. Real impact test of the WB(Moving Deformable Barrier) was carried and compared with finite element simulation. Constitutive model used in the numerical simulation had a good correlation with experiment. By suggesting the optimizing method fur honeycomb cell configuration design, relationship between cell configuration and crush strength is studied.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.601-612
• /
• 2005

In mountainous area, Two parallel tunnels have been usually recognized as a road tunnel which has benefits in aspects of cost and stability. However, Design and construction of 2-Arch road tunnel are growing recently due to environmental destruction, compensation of land and difficulty of route separation. As studies are mainly undergoing on only guaranteeing stability and developing a waterproofing-drainage system to avoid water leakage through comprehension for characteristics of 2-arch tunnel behaviors, there is a tendency to evaluate quantity of support by empirical method with a tunnel which has a complicated cross-section and lack of construction ability. In this study, therefore, we made a plan of tunnel cross-section which had shown good construction ability and developed the waterproofing-drainage system which is able to solve the water leakage problem fundamentally by analyzing precedented 2-arch tunnels and investigating their sites in and out of nation. We also determined fixed quantity of support by a large-scale model test and numerical analysis. We want to contribute to 2-arch tunnel design hereafter introducing design procedure and method applied here.