• 제목/요약/키워드: Large-area measurement

검색결과 361건 처리시간 0.026초

대면적 분리판의 운전 환경 불균일성을 고려한 MEA 성능최적화 방법 (Optimization Method for MEA Performance Considering the Non-Uniformity of Operating Condition in a Large-area Bipolar Plate)

  • 김성민;손영준;우승희;박석희;정남기;임성대
    • 신재생에너지
    • /
    • 제17권2호
    • /
    • pp.50-58
    • /
    • 2021
  • We proposed an MEA development methodology that accurately measures intrinsic MEA performance while considering the uneven reaction environments formed inside a large-area BP. To facilitate measurement of the inherent MEA performance, we miniaturized the active area of the MEA to 3 cm2, and prepared two MEAs with different ionomer contents of 0.65 and 0.80 (I/C). By simulating the operating conditions of a 100 cm2 BP at the inlet (I), center (C), and outlet (O), the oxygen concentration and relative humidity were determined to be 20.7, 13.8, 11.7%, and 50, 66.1, and 70.1% respectively. We measured the performance and electrochemical analysis of the prepared MEAs under the three simulated conditions. Based on the results of statistical analysis of the evaluated MEA performance data, I/C 0.65 MEA had a higher average performance and lower performance deviation than I/C 0.80 MEA. Hence, it can be concluded that an I/C 0.65 MEA is a more effective MEA for large-area BP. Based on the above research process, we confirmed the effectiveness of the proposed MEA development methodology.

축소형 항공기 모델의 레이다 단면적 분석 및 측정에 대한 연구 (A Study on the Measurement and the Analysis of Radar Cross Section of the Scaled Aircraft Model)

  • 김기중
    • 한국전자통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.1055-1060
    • /
    • 2020
  • 본 연구는 축소형 항공기의 레이다 단면적 분석 및 측정에 대한 연구이다. 사전에 축소형 항공기에 대한 레이다 단면적 특성을 전자기 해석 툴을 사용하여 분석하고 실제 축소형 항공기를 제작하여 무반사실에서 측정하였다. 측정 시 구모델을 사용하여 RCS 특성의 기준 데이터로 적용하여 실제 축소형 모델의 시험 결과 데이터에 적용하였다. 측정 방법은 시간 게이팅을 적용하여 무반사실 내부에서 산란되는 성분에 대한 영향을 제거하여 측정의 정확성을 향상시켰다. 축소형 모델의 RCS 시험 결과는 사전 해석 결과와 같이 초단파 대역에서 상대적으로 RCS 특성이 높게 측정되었다. 향후 본 연구를 통하여 파장이 상대적으로 큰 VHF/UHF 대역 레이다의 표적에 대한 RCS 분석 및 측정에 대한 특성 기술에 활용할 예정이다.

GIS 및 지구통계학을 이용한 실시간 통합계측관리 프로그램 개발 (Development of Real Time Monitoring Program Using Geostatistics and GIS)

  • 한병원;박재성;이대형;이계춘;김성욱
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1046-1053
    • /
    • 2006
  • In the large scale recent reclaiming works performed within the wide spatial boundary, evaluation of long-term consolidation settlement and residual settlement of the whole construction area is sometimes made with the results of the limited ground investigation and measurement. Then the reliability of evaluation has limitations due to the spatial uncertainty. Additionally, in case of large scale deep excavation works such as urban subway construction, there are a lot of hazardous elements to threaten the safety of underground pipes or adjacent structures. Therefore it is necessary to introduce a damage prediction system of adjacent structures and others. For the more accurate analysis of monitoring information in the wide spatial boundary works and large scale urban deep excavations, it is necessary to perform statistical and spatial analysis considering the geographical spatial effect of ground and monitoring information in stead of using diagrammatization method based on a time-series data expression that is traditionally used. And also it is necessary that enormous ground information and measurement data, digital maps are accumulated in a database, and they are controlled in a integrating system. On the abovementioned point of view, we developed Geomonitor 2.0, an Internet based real time monitoring program with a new concept by adding GIS and geo-statistical analysis method to the existing real time integrated measurement system that is already developed and under useful use. The new program enables the spatial analysis and database of monitoring data and ground information, and helps the construction- related persons make a quick and accurate decision for the economical and safe construction.

  • PDF

Optimizing Mobile Advertising Using Ad Refresh Interval

  • Truong, Vinh
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제5권2호
    • /
    • pp.117-122
    • /
    • 2016
  • Optimizing the number of ad clicks is a large-scale learning problem that is central to the multi-billion dollar mobile advertising industry. There are currently several optimization methods used, including ad mediation and ad positioning. This paper proposes a new method to optimize mobile advertising by using the ad refresh interval. A new metric, which can measure and compare mobile advertising performance, takes into account time limitations. The results achieved from this optimization study could maximize revenue for mobile advertisers and publishers. This research has high applicability. It also lays out a solid background for future research in this promising area.

대도시 도로변 대기 중 휘발성 유기화합물의 농도측정(II) (Measurement of Atmospheric VOC Concentrations at a Roadside in a Large Urban Area(II))

  • 백성옥;김미현;황승만;정진욱;박상곤
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2000년도 춘계학술대회 논문집
    • /
    • pp.108-109
    • /
    • 2000
  • 도시대기 중에서 질소산화물과 공존시 태양광의 작용을 받아 광화화학 반응을 일으키는 동시에 사람의 건강상에 유해한 성분(발암성 혹은 돌연변이성)들이 많이 존재하는 것으로 알려진 대기오염물질 중에서도 탄화수소성분에 대한 관심이 최근 들어 고조되고 있다. 본 연구에서는 도시 도로변에서 시료를 24시간 연속적으로 채취하여 휘발성유기회합물(Volatile Organic Compounds;이하 VOCs)의 시간별 농도수준 및 거동을 파악하고 나아가 각 VOCs 농도에 영향을 주는 인자에 대해 평가하고자 한다. (중략)

  • PDF

원전사고 후 광역의 방사성 오염부지 내 거주민에 대한 시간에 따른 피폭방사선량 평가 (Assessment of Temporal Trend of Radiation Dose to the Public Living in the Large Area Contaminated with Radioactive Materials after a Nuclear Power Plant Accident)

  • 고아라;김민준;조남찬;설증군;김광표
    • 방사선산업학회지
    • /
    • 제9권4호
    • /
    • pp.209-216
    • /
    • 2015
  • It has been about 5 years since the Fukushima nuclear power plant accident, which contaminated large area with radioactive materials. It is necessary to assess radiation dose to establish evacuation areas and to set decontamination goal for the large contaminated area. In this study, we assessed temporal trend of radiation dose to the public living in the large area contaminated with radioactive materials after the Fukushima nuclear power plant accident. The dose assessment was performed based on Chernobyl model and RESRAD model for two evacuation lift areas, Kawauchi and Naraha. It was reported that deposition densities in the areas were $4.3{\sim}96kBq\;m^{-2}$ for $^{134}Cs$, $1.4{\sim}300kBq\;m^{-2}$ for $^{137}Cs$, respectively. Radiation dose to the residents depended on radioactive cesium concentrations in the soil, ranging $0.11{\sim}2.4mSv\;y^{-1}$ at Kawauchi area and $0.69{\sim}1.1mSv\;y^{-1}$ at Naraha area in July 2014. The difference was less than 5% in radiation doses estimated by two different models. Radiation dose decreased with calendar time and the decreasing slope varied depending on dose assessment models. Based on the Chernobyl dosimetry model, radiation doses decreased with calendar time to about 65% level of the radiation dose in 2014 after 1 year, 11% level after 10 years, and 5.6% level after 30 years. RESRAD dosimetry model more slowly decreased radiation dose with time to about 85% level after 1 year, 40% level after 10 years, and 15% level after 30 years. The decrease of radiation dose can be mainly attributed into radioactive decays and environmental transport of the radioactive cesium. Only environmental transports of radioactive cesium without consideration of radioactive decays decreased radiation dose additionally 43% after 1 year, 72% after 3 years, 80% after 10 years, and 83% after 30 years. Radiation doses estimated with cesium concentration in the soil based on Chernobyl dosimetry model were compared with directly measured radiation doses. The estimated doses well agreed with the measurement data. This study results can be applied to radiation dose assessments at the contaminated area for radiation safety assurance or emergency preparedness.

가스의 광 흡수 특성 분석을 통한 대형 연소시스템 내 실시간 온도 및 농도 계측에 관한 실증 연구 (An Empirical Study on Real-Time Temperature and Concentration Measurement Through Optical Absorption Characteristic Analysis of Gas in a Large Combustion System)

  • 박지연;소성현;박대근;류창국;이창엽;유미연
    • 한국가스학회지
    • /
    • 제24권5호
    • /
    • pp.29-38
    • /
    • 2020
  • 산업현장의 대형 연소시스템 내부의 온도 및 농도를 실시간으로 정밀하게 계측하는 일은 그 규모 및 환경 조건으로 인해 사실상 어렵다. 현재 주로 사용되고 있는 열전대를 이용한 온도 계측은 점 측정 방식으로 대형 연소시스템 내부 광역 범위의 온도 분석에 적용하기에는 정밀성과 신뢰성이 낮으며, 접근성에 한계가 있다. 농도 분석 측면에서 대부분의 계측 방법은 샘플링 방식으로 실시간 측정이 어렵고 대표성에 한계가 있다. 이러한 한계점을 극복하기 위한 방법으로, 레이저를 이용한 측정법이 지속적으로 개발되고 있다. 레이저 기반 측정법들은 선 평균 측정 방식으로 대표성과 정밀도가 뛰어나 대형 연소시스템 적용에 유리하다. 본 연구에서는 파장 가변형 레이저 흡수 분광법(Tunable Diode Laser Absorption Spectroscopy, TDLAS)을 통해 연소 시에 발생하는 수증기와 산소를 이용하여 실시간으로 온도 및 농도를 측정하였다. 측정 결과 연소시스템 내부 평균 온도는 1330℃, 평균 산소 농도는 3.3 %로 발전소 데이터와 비교하였을 때 유사한 경향성의 측정값을 얻었다.

임부체형(姙婦體型)의 횡단적(橫斷的) 연구(硏究) (A Study on Latitudinal Body form of Pregnant Women)

  • 나미향;박정미;이연순
    • 한국의류학회지
    • /
    • 제17권2호
    • /
    • pp.177-196
    • /
    • 1993
  • By cluster sampling measurements, passing months of pregnancy according to changes of pregnant women body forms. On the basis of the above mentioned data, sizes of pregnant women clothes were decided. The results are as follows. 1. By cluster sampling measurements, sixty-nine items of apparel were obtained during the three different periods of pregnancy. They included the mean and standard deviation of body form measurement and the minimum and maximum values (Chart 3-4). The results of these surveys made it possible to notice the changes of pregnant womens' physical characteristics, i. e., the increased physical proportions: frontal waist area, umbilicus width, abdominal girth, crotch length, the length of the nipple, and body weight and the decreased proportions: omphalos height, perineum dimension. There was little change in the rear parts of the body. 2. The analized results of principle factors for body form measurements by cluster measurements produced seven major factors for which the proper values were over 1.0. They were: form factor, pregnancy factor, posture factor, breast formation factor, rear body formation factor, and nipple to nipple breadth. 3. In deciding garment sizes of pregnant women, four different sizes were established; small, medium, large, and extra-large according to the third, fifth, eighth, and tenth month of pregnancy. The measurement value of each item was produced by estimate.

  • PDF

소형 잔향실의 확산 음장 보정 계수 측정 연구 (The Study on Correction Factor of a Small Scale Reverberation Chamber to Estimate Transmission Loss)

  • 김태민;김다래;김정태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.960-965
    • /
    • 2014
  • Transmission loss of specimen is calculated by measuring energy of incident and transmission and using reverberant room of large size. But normal measurement of transmission loss has trouble because it is actually demanded that large area and specimen of certain size is satisfied with condition of diffused sound field. Especially, in case of mechanical component, interested frequency band is mid-frequency band between 500 ~ 2k Hz, and it is used to be available to minimize a reverberation chamber under conditions satisfying acoustic one because production of specimen for transmission loss measurement has limit. But, as in semi-reverberation room, it is difficult to satisfy condition of diffuse sound field and modification factor is applied to complement that. Correction factor when measuring transmission loss using semi-reverberation chamber is required accuracy because it works as main factor determining reliability of reuslts on transmission loss. In this study, it is analyzed that an effect on correction factor based on varying materials and sizes of specimens in order to deduction of it. Also It is confirmed that applied by elicited correction factor with actual railway vehicle's floor has reliability.

  • PDF

대면적 입자 측정 분석법을 이용한 셰일 가스 저류층 내공극 구조 연구 (The Study of Pore Structure in Shale Gas Reservoir Using Large-area Particle Measurement Method)

  • 박선영;고용규;최지영;이준희
    • 광물과 암석
    • /
    • 제34권4호
    • /
    • pp.209-218
    • /
    • 2021
  • 비전통(unconventional) 에너지 자원 중 최근 각광받고 있는 셰일 가스의 회수율을 높이기 위해서는 저류층의 공극 구조 연구가 필수적이다. 본 연구에서는 대면적으로 입자나 형상 분포를 확인 할 수 있도록 개발된 분석 장치인 대면적 자동화 입자 분석 시스템(Scanning Electron Microscope Particle Analysis, SELPA)을 활용하여 셰일 가스 저류층 시료의 공극 분포를 관찰하였다. 본 연구에서는 리아드 분지에서 시추된 A-068 시추공 시료 중 방해석이 주 구성 광물인 시료를 대상으로 연구를 수행하였다. SELPA를 이용하여 시료 내 수십 나노에서 수백 마이크로미터 크기의 공극을 관찰하였고 각 공극의 크기 별 비율을 확인하였다. 같은 영역의 표면을 대상으로 각각 1000배, 3000배, 5000배의 배율로 이미지를 관찰하여 공극의 분포를 확인한 결과 최소 3000배 이상의 배율에서 관찰해야 100 nm 이하의 공극까지 관찰되어 작은 스케일의 공극 분포까지 분석할 수 있는 것이 확인되었다. 본 연구에서 소개된 방법론을 통해 셰일 가스 저류층을 포함한 비전통 자원의 저류층 내공극의 분포를 단시간에 파악할 수 있는 방법론이 확인되었으며 향후 비전통 저류층 내 공극 구조 파악에 활용할 수 있을 것이 기대된다.