• 대한치과의사협회지
• /
• 제58권7호
• /
• pp.388-397
• /
• 2020

Objective: The purpose of the study was to calculate the effective and absorbed organ doses of cone-beam computed tomography (CBCT) in pediatric patient using personal computer-based Monte Carlo (PCXMC) software and to compare them with those measured using thermoluminescent dosimeters (TLDs) and anthropomorphic phantom. Materials and Methods: Alphard VEGA CBCT scanner was used for this study. A large field of view (FOV) (20.0 cm × 17.9 cm) was selected because it is a commonly used FOV for orthodontic analyses in pediatric patients. Ionization chamber of dose-area product (DAP) meter was located at the tube side of CBCT scanner. With the clinical exposure settings for a 10-year-old patient, DAP value was measured at the scout and main projection of CBCT. Effective and absorbed organ doses of CBCT at scout and main projection were calculated using PCXMC and PCXMCRotation software respectively. Effective dose and absorbed organ doses were compared with those obtained by TLDs and a 10-year-old child anthropomorphic phantom at the same exposure settings. Results: The effective dose of CBCT calculated by PCXMC software was 292.6 μSv, and that measured using TLD and anthropomorphic phantom was 292.5 μSv. The absorbed doses at the organs largely contributing to effective dose showed the small differences between two methods within the range from -18% to 20%. Conclusion: PCXMC software might be used as an alternative to the TLD measurement method for the effective and absorbed organ dose estimation in CBCT of large FOV in pediatric patients.

• Journal of Preventive Medicine and Public Health
• /
• 제36권2호
• /
• pp.125-130
• /
• 2003

Objectives : This study evaluated the stress of community residents using the General Health Questionnaire, GHQ-60, as an instrument of stress measurement. Methods : The study included 2100 residents, aged 20 and over, living in three areas, a large city, a medium sized city and a rural area, between June and September 2001. A questionnaire interviewing method was used to collect data. The data were analyzed using a t-test, ANOVA, Pearson's correlation coefficients and multiple regression analysis. Results : In this study, the degree of stress, as measured by the GHQ-60, was shown to be significantly higher in the following categories: females, people over 60 years old, people engaged in the primary industries and labor work, low incomes, the divorced and the bereaved, people who received no more than an elementary education, people who suffer from chronic diseases and non-exercisers. A factor analysis suggested that there were three factors of social dysfunction factors; psychosomatic symptom, and depression and anxiety, The social dysfunction factors was statistically significant for the groups described above. The factor of psychosomatic symptoms was statistically significant in the rural residents, and in the groups describedabove. The depression and anxiety factor was statistically significant in the large city residents, people aged between 20-29 years, students, unmarried persons, university graduates and those having suffered from chronic diseases. From the multiple linear regression analyses, chronic disease, exercise, gender and income, proved to be significant stress related factors Conclusions : This study suggests that special attention should be given to the management of the chronic invalided, non-exercisers, females and snail income earners, in order to maintain and promote the psychological health of residents in a community.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.74-79
• /
• 2009

Titanium and titanium alloy can be reproduced immediately even if oxide films($TiO_2$) break apart in sea water. Therefore, since titanium demonstrates large specific strength and outstanding resistance to stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion in sea water environment, it has been widely applied to heat exchanger for ships. In particular, with excellent elongation, pure titanium may be deemed as optimal material for production of heat exchanger plate which is used with wrinkles formed for efficient heat exchange. Conventional plate type heat exchanger prevented leakage of liquid through insertion of gasket between plates and mechanical tightening by bolts and nuts, but in high temperature and high pressure environment, gasket deterioration and leakage occur, so heat exchanger for LPG re-liquefaction device etc do not use gasket but weld heat exchanger plate for use. On the other hand, since welded plate cannot be separated, it is important to obtain high quality reliable welds. In addition, for better workability and production performance, lasers that can obtain weldment with large aspect ratio and demonstrate fast welding speed even in atmospheric condition not in vacuum condition are used in producing products. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through quantitative analysis of oxygen and nitrogen and measurement of hardness as fundamental experiment for the evaluation of titanium laser welding, and evaluated the welding performance and mechanical properties of butt welding. This study welded specimens in various conditions by using laser and GTA welding machine to apply edge welding to heat exchanger, and evaluated the mechanical strength through tensile stress test. As a result of tensile test, laser weldment demonstrated tensile strength 4 times higher than GTA welds, and porosity could be controlled by increasing and decreasing slope of laser power at overlap area.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.628-633
• /
• 2011

Studies on lead-free piezoelectrics have been attractive as means of meeting environmental requirements. We synthesized lead-free piezoelectric $(Bi_{1/2}Na_{1/2})TiO_3-Ba(Cu_{1/3}Nb_{2/3})O_3$ (BNT-BCN) ceramics, and their dielectric, piezoelectric, and strain behavior were characterized. As BCN with a tetragonal phase was incorporated into the rhombohedral BNT lattice, the lattice constant increased. A small amount of BCN increased the density and dielectric constant forming the complete solid solution with BNT. However, BCN above 10 mol% was precipitated into a separate phase, and which was detected with XRD. In addition, EDX measurement revealed that Cu in BCN was not distributed homogeneously but was accumulated in a certain area. A lower density with a large amount of BCN was attributed to the nonsinterable property of BCN with large tetragonaliy. The dielectric constant vs the temperature change and the strain vs the electric field indicated that the ferroelectric property of BNT was diminished and paraelectric behavior was enhanced with the BCN addition. BNT-7.5BCN showed a 0.11% unimorph strain with a 9.0 kV/mm electric field with little hysteresis.

• 한국조경학회지
• /
• 제46권6호
• /
• pp.17-25
• /
• 2018

본 연구는 경회루 권역의 경관개선을 위해 원형을 고찰하고, 수목 생장예측모델을 추정하여 개선방안을 제시하기 위해 실시하였다. 식재경관의 개선방안에 대한 검증을 위해 만세산에 식재된 수목에 대한 사진측량을 진행하였다. 만세산 송림의 생장율을 알아보기 위해 Pressler 공식을 이용하고, 시뮬레이션을 제작하여 분석하였다. 연구 결과는 다음과 같다. 첫째, 현장조사 및 경관분석 결과, 경회루 권역의 수목들은 수양벚나무와 감나무를 제외하고 흉고직경 30cm 이상의 대교목으로 특히 경관을 차폐하는 만세산의 송림과 북쪽 화계의 수목들에 대한 전정을 통해 관리하거나, 작은 수목으로 대체할 필요가 있다. 둘째, 수목생장율 측정 결과, 평균 10년을 기준으로 남측 만세산은 근원직경 14%, 수고 5%가 북측 만세산은 근원직경 7%, 수고 2.4% 만큼 생장하였다. 나아가 산출된 수목생장률을 바탕으로 시뮬레이션을 작성했을 때 20년 후에는 경회루 2층에서 경관 또한 만세산의 송림이 인왕산의 스카이라인을 차단함을 확인하였다. 셋째, 경관개선 시뮬레이션을 분석하여 경회루 권역의 경관을 조망하기 위한 수목관리방안을 제시하였다. 본 연구는 경회루 권역의 식재경관을 고증하고 효율적인 정비방안을 도출한 것에 의의가 있다.

• 터널과지하공간
• /
• 제26권4호
• /
• pp.304-315
• /
• 2016

본 연구에서는 포항 도움산 지역 내 시험공 3개소의 심도 75 m~716 m 구간에서 획득된 원위치 암반 초기응력 측정 자료를 바탕으로 포항분지 제3기 지층 내에 형성되어 있는 수평응력 분포 특성을 분석하였다. 수압파쇄법에 의한 대심도 초기응력 측정 결과, 조사 지역의 수평응력 성분 크기는 국내 여러 지역 자료에 대한 선형 회귀분석으로부터 계산된 평균값에 비해 매우 낮은 범위의 값을 나타내었다. 그러나 시추공 스캐닝 조사에서 분포 암종의 낮은 강도 특성에 의해 유발된 다양한 규모의 시추공 파괴 현상들이 다수 확인되었다. 최대 수평응력의 방향성에 대한 보다 정확하고 폭넓은 정보를 도출하기 위해 수압파쇄시험과 시추공 스캐닝 자료에 대한 통합 분석을 추가적으로 수행하였다. 분석 결과, 상부 퇴적암층과 하부 화산암층에서 최대 수평응력 작용 방향은 각각 진북 기준 $80^{\circ}{\sim}100^{\circ}$ (N80E~N80W)와 $120^{\circ}{\sim}140^{\circ}$ (N60W~N40W) 방위각에서 우세한 방향성을 나타내었다. 이러한 연구 결과로부터 심도 증가로 지층이 변화함에 따라 최대 수평응력 방향이 시계 방향으로 회전하는 경향성을 확인할 수 있었다.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• 한국실내디자인학회논문집
• /
• 제24권1호
• /
• pp.34-42
• /
• 2015

This research is about shared living facilities for the solitary elderly in Gyeonggi province (so called "Carnation House"), which was opened after 2013. These facilities aim to help solving the social problems of the growing number of the solitary elderly. The research was conducted from April 2014 to October 2014 by using observation, measurement, photography, and interview methods. This research reviewed floor plan, area, accessibility, visual openness, and furniture and equipments. The results are as follows: First, considering the need for rest area and the protection of privacy, livingroom should at least be equipped with a variable wall or have a separate room. Secondly, for the kitchen plan, considering the fact that large number of people move simultaneously, kitchen entrance should be widened or LDK type is preferable. Thirdly, the bathroom entrance should be widened to at least 800mm and should have barrier free design. Fourthly, porch entrance should be planned to secure enough space and shoe cabinets for multiple users. Fifthly, to allow the users to enjoy outside view, the windows of living spaces should be placed no higher than 800mm from the floor level. Finally, for the location of the facility, people prefer the location be at the center of the village or near home. In addition, location with easy accessibility for the elderly is advisable. Therefore, establishing local guidelines for shared living facilities for the solitary elderly is advisable. When establishing local guidelines, local characters, culture and usage patterns should be considered.

• 한국전자파학회논문지
• /
• 제7권3호
• /
• pp.219-229
• /
• 1996

육상 이동통신의 서비스 범위 예측에 가장 기본이 되는 전송 손실 계산 방식은 그 적용범위 및 모델도출 방법에 따라 많은 발전을 거듭하여 왔다. 그러나, 전파는 이것이 지나가는 환경, 즉 빌딩의 특성이나, 나무, 그리고 지형형태 등에 의해 너무나 많은 영향을 받으므로 미국,일본 동 외국의 환경에서 만들어져 국내에 도입된 전파 예측모델들은 우리나라의 실정에 적합하지 않는 점이 많다. 본 논문에서는 국내 지형을 분석하여 그 특성에 따라 여섯가지의 종류로 분류하고 각각에 해당하는 국내 지역을 선정하여 무선호출 주파수 대역에서 전계강도 측정을 수행하였다. 또한, 이 측정 데이타를 이용한 실험식과 함께 산악지역에서의 회절 계산식을 포함하여 가시거리 및 비가시거리를 구분하여 전계강도를 계산하는 예측모델을 만들었다. 제안된 모델을 국내 지형 데이타 베이스와 연결하여 전계강도 예측을 수행한 값과 실측된 데이타와 비교한 결과, 최소 3dB에서 최고 9dB 정도로 오차가 나타났으므로 실용성이 있을 것으로 판단된다.

• 대한물리의학회지
• /
• 제7권4호
• /
• pp.459-469
• /
• 2012

PURPOSE: The purpose of the present study was to examine changes caused by asymmetric bag carrying methods to carry the bag with one shoulder only to plantar pressure during walking. METHODS: Twenty three normal adults without any gait problem participated in the present study. Experimental conditions used consisted of walking without carrying any bag(condition 1), walking wearing a bag on both shouders (condition 2), and walking wearing a bag on the right shoulder(condition 3) and the weight of the bag was set to 15% of each subject's body weight. All the subjects were instructed to participate in all experiments under these three conditions and plantar pressures were measured from the subjects' right and left feet using an F-scan system while the subjects were walking under the three conditions. To analyze the measured plantar pressure, the sole was divided into seven areas (Hallux, Toe, Met1, Met23, Met45, Mid foot and Heel) and maximum plantar pressures in individual areas were measured. RESULTS: The results of measurement of plantar pressures under three walking conditions did not show significant changes in any areas of the left and right feet except for the mid foot area of the right food. The asymmetry between the left and right feet was examined and the results showed significant differences only in area Met23 under condition 2 and did not show significant differences in any other areas. CONCLUSION: On comprehensively considering the results of the present study, it could be seen that asymmetric bag carrying did not have large effects on changes in plantar pressure during walking compared to symmetric carrying. The reason for this is considered to be posture adjusting mechanisms against load positions.