• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.21-28
• /
• 2010

Forest fire is one of the main factor disturbing the environment of forest, and it influences greatly the structure and function on forest. The process of vegetation recovery could be decided according to the extent of the damage. It is required a lot of man powers and budgets to understand born severity and process of vegetation rehabilitation at the damaged area after large-fire. However, the analysis of born severity in the forest area using satellite imagery can acquire rapidly information and more objective results remotely in the large-fire area. In this study, the space sensors have been used to map area burned, assess characteristics of active fires. For classifying fire damaged area and analyzing severity of Cheongyang-Yesan fire in 2002, in this paper we use pre- and post-fire imagery from the Landsat TM and ETM+ to compute the evaluate large-scale patterns of burn severity, use the digital stock map to calculate the damaged condition about the forest fires damaged regions and use the NDVI to monitoring the situation of the revegetation.

• Journal of Sensor Science and Technology
• /
• v.24 no.1
• /
• pp.10-14
• /
• 2015

This paper reports the results of a study on the optimization of the etching profile, which is an important factor in deep-reactive-ion etching (DRIE), i.e., dry etching. Dry etching is the key processing step necessary for the development of the Internet of Things (IoT) and various microelectromechanical sensors (MEMS). Large-area etching (open area > 20%) under a high-frequency (HF) condition with nonoptimized processing parameters results in damage to the etched sidewall. Therefore, in this study, optimization was performed under a low-frequency (LF) condition. The HF method, which is typically used for through-silicon via (TSV) technology, applies a high etch rate and cannot be easily adapted to processes sensitive to sidewall damage. The optimal etching profile was determined by controlling various parameters for the DRIE of a large Si wafer area (open area > 20%). The optimal processing condition was derived after establishing the correlations of etch rate, uniformity, and sidewall damage on a 6-in Si wafer to the parameters of coil power, run pressure, platen power for passivation etching, and $SF_6$ gas flow rate. The processing-parameter-dependent results of the experiments performed for optimization of the etching profile in terms of etch rate, uniformity, and sidewall damage in the case of large Si area etching can be summarized as follows. When LF is applied, the platen power, coil power, and $SF_6$ should be low, whereas the run pressure has little effect on the etching performance. Under the optimal LF condition of 380 Hz, the platen power, coil power, and $SF_6$ were set at 115W, 3500W, and 700 sccm, respectively. In addition, the aforementioned standard recipe was applied as follows: run pressure of 4 Pa, $C_4F_8$ content of 400 sccm, and a gas exchange interval of $SF_6/C_4F_8=2s/3s$.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.3
• /
• pp.11-18
• /
• 2015

This study is aimed to clarify the transitional characteristics of old roads and alleys lasting more than 100 years(1915-2015) in traditional urban area(Seongan-dong) of cheongju, historic inland and castle city of Korea. Cheongju castle had been completely destroyed In 1915, and urban structures been also altered last 100 years from 2015 now. Periodically, after destruction of castle, existing roads were extended and transformed to straight line for connecting with around. Expanding urban area to all directions of castle boundary in 1930-40s, town planning were created. These projects were completed in 1960-70s, the street network was built as they are. Since the 1980s, changes had been occurred in the details such as an extension of the unexecuted roads, the opening of fire lane in a block, and etc. In change and construction of roads, urban district plan in 1939 and reorganization since 1967 were planned and established with the type, location, and width of the large, medium and small roads based on data before destruction of castle. Except the width of 25m Sajikro(large3-1) and Sangdangro(large3-8,9,10), the width of 15m Namsaro(medium2-1) and Namjuro (medium2-4) as an extension of the roads, the other roads were small roads equivalent to the existing roads, and so remain intact figure of streetscape. As such, roads of east-west and north-south cross type, roads showing the outline of Cheongju castle fortress, and alleys outside the south gate are sustained in Seongan-dong of cheongju as historic urban area, and also present roads are delicately executed to the existing urban fabric.

• Journal of the Korean Institute of Educational Facilities
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2002

According to seventh curriculum, new types of school design have been developed recently. However there are hardly any data of national status about plan and area organization, types and number of rooms of those. On this background, the purpose of this study is to provide fundamental resources for architectural designing and planning of high schools and to recognize national status of plan organizations of high schools through collecting 53 school's standard design drawings(arrangement, plan drawing) which city, province education office drafted for 4 years(from 1997 to 2000) and analyzing them into plan types, building area and type, number and area of rooms. The results of this study are as follows: 1. The range of class number of designed 53 high schools varies from 24 to 36 and 36-class-schools are 47.2% of all. Average number of class is 34.1. As a result we can find out large scale schools are mainly designed. 2. Among 53 schools, 21 schools have the department system but few of them equipped sufficient rooms and their features are very manifold. After recognizing utilization status of each schools, the standards of room type, number and plan organization should be proposed. In terms of plan type for fluent level based transferring class, most of schools are not apt. 3. In the status of type and number of rooms related to class number, range is very wide. So simplification is necessary. 4. The variations of building area, area per a class and area per a student are very large so that standard of adequate area should be established. 5. That every school which has different plan organization from conventional schools exceeds ministry of education's minimum area standards shows those standards cannot cover the diverse plan design of school. So more adequate standards should be proposed. 6. Area and number of Teacher's research room and Home Base are also very manifold from school to school. They are also considered to be simplified immediately.

• Journal of the Korean Institute of Educational Facilities
• /
• v.8 no.5
• /
• pp.5-16
• /
• 2001

This paper presents results from analysis of architectural plan drawings of 355 elementary schools recently designed for 4 years. Theses plans are analyzed by factors such as local distribution, number of classes, type of plan, total construction area, area per a class, area per a student, and area status of each space. The purpose of this study is to provide fundamental resources for architectural designing and planning of elementary schools through finding trend and status of elementary school buildings that have no detailed data of area index. The results of this study are as follows: 1. As a result from analyzing number of classes in the surveyed schools, schools having 36 classes are dominant and schools having 72 classes are also shown. Average number of classes is 34.1. This result reflect s that elementary schools have been planned as large-scale schools. 2. In terms of type of plan, we found out that instead of disappearing traditional single corridor type building, the open school building that have multi-purpose spaces are mainly designed. In addition to that, there are few schools with large class rooms. 3. In the status of area of each school, they have much larger areas than areas provided by building guidelines. Secondly, there are some schools with two times area difference even though they have same class number. Therefore, it needs to adjust the school building guidelines to practical needs in the consideration of elementary school building for compulsory education. Though the plans of recently designed school for 4 year s are more differentiated than past, there are few schools planned by appropriate plan design and area distribution scheme. As a consequence, some improvements like improvement of building guidelines are desperate.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.9 no.1
• /
• pp.35-41
• /
• 2003

The evaluation of economy of wards is based on the building area. The parameters are nursing area per bed, occupied area per patient, and the portion of movement area. Three areas such as patient area, nurse area, and corridor area are devided. The results of analysis are as follows. At first, allocation of patient area has the highest priority. Even though nurse area is small, the patient area is relatively large. Secondly, the patient area is mostly determined by the type of rooms, such as single, double, etc.. Finally, the type of alley on the floor is important to economy. The single corridor type is the most economical followed by the double corridor type. the single loaded type shows the worst economy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1254-1258
• /
• 2005

Net outflow flux and unit load of pollutants were investigated at a paddy fields area(Soro-ri) with large-scaled plots on loam soil during irrigation seasons of $2001\~2003$. Water samples were collected, and inflow and outflow were .measured at $5\~10$ day intervals during non-storm periods and at $2\~6$ hours intervals during storm events. The average concentration of TP in percolated water was much smaller than that in irrigation and surface outflow water likely due to phosphorus absorption capacity of paddy soils. Net outflow flux in study area was significantly correlated with rainfall and surface outflow discharge. Nutrient flux from Paddy fields can be abated by reduction in outflow surface discharge.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.3
• /
• pp.169-178
• /
• 1992

Dispersion of pollutant in a mountainous area is simulated in a wind tunnel. In the northwest side of the terrain model, the sea level is assumed. Wind from the sea initially confronts hills along the shoreline, a line of large buildings next, and finally a valley between high mountains in the south and in the east. In the northwest wind conditions, severe flow separation occurs in the lee side of hills, even beyond the building area. Pollutant from the buildings is trapped in this region and its concentration is the highest. In the west wind conditions, pollutant from the buildings flows along the hills aslant the main wind direction in this case. Since large valley is located in the downstream, pollutant tends to disperse along the valley.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.67-70
• /
• 1999

We have fabricated YBa$_2Cu_3O_{7-x}$ thin films by cylindrical hollow cathode sputtering. For 2 inch diameter of MgO (100) substrate, we obtained the zero resistance temperature in the range from 83 K to 86 K and thickness uniformity better than 5 % over the whole area. Also, the average deposition rate was 100nm/h which is higher than 10 times compare to conventional off-axis sputtering method. These results indicate that cylindrical hollow cathode sputtering seems to have unique capabilities for high rate and homogeneous deposition of large area thin film.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.245-246
• /
• 2008

The goal of this study is to explore the possibility of KLT tracker for tracking the features between two images including rotation and shift. As a test site, Jangsu-Gun area of South Korea is selected and the images taken from UAV camera are used for analysis. The analysis was carried out using KLT tracker developed in a PC environment. The results of the experiment used two images with the large overlapping area are compared with the results of two images with the little overlapping area and rotation. Overall, the research indicates that the integrated features of littlerotation and motion images can significantly increase during the tracking process. But using KLT tracker for extracting and tracking features between images with large rotation and motion, the number of tracked features are decreased.