• Journal of Korea Foundry Society
• /
• v.24 no.2
• /
• pp.63-70
• /
• 2004

Foundry techniquews for large steel casting depends on the skills of foundrymen considerably. Especially, the problem of reducing casring surface defects is difficult to clear numerically. Statistical analysis by using wuantification theory for hot tear and sand inclusion, and multiple regression analysis for dimensional defects have been shown to be examples of solving this difficulty. Many causes of surface defects can be evaluated by these analyses. These evaluations serve as the base data of defect reduction and contribute to the constant improvement of casting quality and quality enhancement activity. The system to perform quality enhancement activity was developed and it proved very useful for transfering foundry techniques and skills from the old to young generations.

• Journal of Korea Foundry Society
• /
• v.10 no.6
• /
• pp.528-537
• /
• 1990

7XXX aluminum alloy powders produced by the self-manufactured rotating disc atomizer were investigated to determine the influence of the atomization parameters on the particle size distributions in air atmosphere. The particle size distributions are almost always bimodal with the dominant mode on the large particle size. Average powder size of 7XXX aluminum alloy is $74/{\mu}m~125/{\mu}m$ when melt is poured with the rate of 9g /sec at 730$^{\circ}C$ on a rotating disc of 30㎜ diameter at 6300rad/sec. The mass of finer particle increased when disc diameter, angular velocity, pouring temperature increased and pouring rate decreased. The powder shapes of bimodal change from acicular to tear-drop and from tear-drop to ligament with increasing powder size. Powder shape was determined by the atomization mechanism and oxidation in liquid state. Microstructure of powders appeared to be cell and cellular dendrite. The SDAS of Al-7.9wt%Zn-2.4wt%Mg-1.5wt%Cu-0.9wt%Ni Powders is $0.8{\mu}m~1.0{\mu}m$ for the powders of $size＋44{\mu}m~53{\mu}m$ and $1.6{\mu}m∼1.8{\mu}m$ for the powders of $size＋105{\mu}m~125{\mu}m$, repectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1169-1178
• /
• 2008

In this study, a questionnaire was compiled by conducting interviews and preliminary surveys, and then handed out to a total of 270 welders working in shipyards to investigate their opinions on welding clothes. By which investigation, it was intended to understand their dissatisfactions and issues with conventional welding clothes and then propose of such welding clothes as may offer better fit and suitability. A total of twenty welding suits were collected to find the locations and degrees of wear and tear. Due to too large differences in the locations and degrees of wear and tear among the clothes, the evaluation was focused on ten suits out of the twenty suits collected. The researcher’s subjective judgment was used to select the nineteen most severely damaged parts, which were then photographed in a uniform distance and evaluated by a group of experts in terms of the degree of damage in order to locate most severely damaged parts and select adequate materials for those parts in designing an experimental suit. Based on two above evaluations, the experimental welding suit was produced in consideration of the design, materials and patterns. A lab evaluation and a site evaluation were conducted to compare the experimental suit and other conventional suits, a lab evaluation and a field evaluation were performed.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.667-670
• /
• 2007

Purpose: Among the materials for cranioplasty, autogenous bone is ideal because it is less susceptible to infection and has lower rates of subsequent exposure. However, the procedure is technically demanding to perform and requires a donor site. Disadvantages further exist when the defect is large and there are attendant limitations in donor site. The authors present their experience with reconstruction of large skull defect using right-angled zigzag osteotomized outer table of autogenous calvarial bone, overcoming the limitation in donor site. Methods: From 2000 to 2006, 9 patients were retrospectively reviewed, who had undergone reconstruction with right angled zigzag osteotomized outer table of autogenous calvarial bone. Results: Aesthetically satisfactory skull shape was achieved. Major complications of infection, hematoma, plate exposure, and donor site complications of dural tear with bleeding, cerebrospinal fluid leak, and meningitis were not seen. One patient had delayed wound healing and was successfully managed conservatively. Conclusion: Autogenous bone is the material of choice for cranioplasty, especially in complicated cases. Right angled zigzag osteotomy is a useful method in reconstruction of large skull defects with less donor site morbidity.

• Clinics in Shoulder and Elbow
• /
• v.26 no.2
• /
• pp.131-139
• /
• 2023

Background: Massive rotator cuff tears (RCTs) are complicated by muscle atrophy, fibrosis, and intramuscular fatty degeneration, which are associated with postoperative tendon-to-bone healing failure and poor clinical outcomes. We evaluated muscle and enthesis changes in large tears with or without suprascapular nerve (SN) injury in a rat model. Methods: Sixty-two adult Sprague-Dawley rats were divided into SN injury (+) and SN injury (-) groups (n=31 each), comprising tendon (supraspinatus [SSP]/infraspinatus [ISP]) and nerve resection and tendon resection only cases, respectively. Muscle weight measurement, histological evaluation, and biomechanical testing were performed 4, 8, and 12 weeks postoperatively. Ultrastructural analysis with block face imaging was performed 8 weeks postoperatively. Results: SSP/ISP muscles in the SN injury (+) group appeared atrophic, with increased fatty tissue and decreased muscle weight, compared to those in the control and SN injury (-) groups. Immunoreactivity was only positive in the SN injury (+) group. Myofibril arrangement irregularity and mitochondrial swelling severity, along with number of fatty cells, were higher in the SN injury (+) group than in the SN injury (-) group. The bone-tendon junction enthesis was firm in the SN injury (-) group; this was atrophic and thinner in the SN injury (+) group, with decreased cell density and immature fibrocartilage. Mechanically, the tendon-bone insertion was significantly weaker in the SN injury (+) group than in the control and SN injury (+) groups. Conclusions: In clinical settings, SN injury may cause severe fatty changes and inhibition of postoperative tendon healing in large RCTs. Level of evidence: Level Basic research, controlled laboratory study.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.3
• /
• pp.172-179
• /
• 2008

Purpose: To evaluate the functional and structural results of arthroscopic double-row repair using combined knot-tying and knotless suture anchors in rotator cuff tears. Materials and Methods: From March 2006 to June 2007, twenty-one patients (15 males, 6 females; mean age 55.6 years; range 48 to 67) were included who underwent arthroscopic double-row repair for full-thickness tears of the rotator cuff following conservative treatment for a mean of 6.5 months (range 3 to 11). The tear size was carefully inspected arthroscopically and we found 2 small, 13 medium and 6 large-sized rotator cuff tears, with a mean tear size of 2.5cm(range 1.8 to 3.2). The repair constructs were consisted of horizontal mattress sutures using conventional knot-tying suture anchors medially and simple suture at the same level of medial row stitch with Bioknotless RC anchors (DePuy Mitek, Norwood, MA) as lateral row. Clinical and functional evaluations were made according to the range of motion, the ASES, UCLA scale and the isokinetic strength testing. Postoperative cuff integrity was determined through magnetic resonance imaging. The mean follow-up was 15 months (range 13 to 24). Results: The average clinical outcome scores and strength were all improved significantly at the time of the final follow-up (p < 0.01). Nineteen patients (90%) were satisfied with the result of the treatment. In 17 of 21 patients (81%) were judged to reveal healed tendon on magnetic resonance imaging at a mean of 7 months postoperatively. There were no significant functional differences according to the preoperative tear size (p<0.01), but large-sized tear shows less favorable structural results in 3 out of 6 cases(50%). Conclusion: Our results document the usefulness and variability of arthroscopic double-row rotator cuff repairs comparable to the results of the other types of double-row repairs.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.418-426
• /
• 2019

Purpose: This study analyzed the features of humeral head decentralization in large to massive rotator cuff tears with a shoulder dislocation in the elderly. Moreover, shoulder instability and treatment were reviewed. Materials and Methods: From May 2005 to February 2017, Group A containing 45 cases (45 patients) over 65 years old accompanied by a large or massive rotator cuff tear with a shoulder dislocation and Group B containing 45 cases (45 patients) without a shoulder dislocation were enrolled. The mean ages in Groups A and B were 73.2 and 72.1 years old, and the mean follow-up periods were 30.7 and 31.3 months, respectively. Twenty-one cases (46.7%) in Group A underwent rotator cuff repair, and 8 cases (17.8%) underwent concomitant rotator cuff repair with Bankart repair. Sixteen cases (35.6%) underwent reverse total shoulder arthroplasty for cuff tear arthropathy. 45 cases (100%) in Group B underwent rotator cuff repair. The off-the center and head elevation were measured in the preoperative magnetic resonance imaging (MRI) of Groups A and B. The preoperative and postoperative visual analogue scale (VAS) score, American Shoulder and Elbow Surgeons (ASES) score, and University of California Los Angeles (UCLA) score in Groups A and B were compared. Results: In Groups A and B, the mean off-the centers were posterior 7.41 mm and posterior 2.02 mm (p=0.03), and the mean head elevations were superior 6.66 mm and superior 2.44 mm (p=0.02), respectively. The mean ASES scores of Groups A and B were 32.8 and 33.4 before surgery, and 77.1 (p=0.02) and 78.1 (p=0.02) after surgery (p=0.18), respectively. The mean UCLA scores of Groups A and B were 13.1 and 12.8 before surgery, and 28.9 (p=0.02) and 29.5 (p=0.01) after surgery (p=0.15), respectively. Conclusion: Patients over 65 years old with a shoulder dislocation in large to massive rotator cuff tears had higher off-the center and head elevation on the preoperative MRI than those without a shoulder dislocation. This measurement can help predict preceding shoulder instability. Early rotator cuff repairs should be performed and other treatments, such as Bankart repair and reverse total shoulder arthroplasty, should also be considered.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.2
• /
• pp.146-149
• /
• 1999

The localized form of a giant cell tumor of tendon sheath rarely affected the large weight-bearing joints. Only four cases of localized giant cell tumor arising in the knee joint could be found in the literatures. Physical examination of the affected knee could show pain, swelling, locking, giving way and limitation of extension, but it was difficult to differentiate from meniscal tear or cruciate ligament tear. Two cases of localized giant cell tumor of tendon sheath were incidentally found in the knees during the reconstruction of the anterior cruciate ligaments. Both tumors arising from the anterior cruciate ligament were excised arthroscopically and were confirmed to be localized giant cell tumor of tendon sheath by microscopic examination. The clinical results were good after complete excision, so we reported these cases with a review of the literatures.

• Clinics in Shoulder and Elbow
• /
• v.9 no.1
• /
• pp.42-49
• /
• 2006

Purpose: This study evaluated clinical results, and recommended treatment protocol of traumatic anterior shoulder dislocation in the patients older than 60 years of age. Materials and Methods: Thirty-eight patients with first traumatic anterior shoulder dislocation aged over 60 years were included. The average age was 69.4 (range, 60 to 87 years). There were 8 men (average age of 71.6) and 30 women (average age of 69). Most common cause of injuries was a fall on the outstretched hand. The additional injuries were evaluated using MRI or CT arthrogram in the patients with significant pain and weakness while movements after 2 weeks sling immobilization. Results: Fifteen patients (39%) had rotator cuff tears and 5 patients (14%) had greater tuberosity fractures. The sizes of rotator cuff tears were diverse; 2 partial tears, 1 small tear, 4 medium tears, 3 large tears and 5 massive tears. Among 5 massive cuff tears, 3 patients revealed cuff arthropathy after reduction. 4 patients (11%) had recurrent dislocation more than one time during 1 month after the first dislocation. Bankart lesions revealed in 5 patients and three of them had associated rotator cuff tears. 3 out of 5 patients with Bankart lesions, 13 out of 15 patients with rotator cuff tears and 3 patients with displaced greater tuberosity fracture had operations. Conclusion: The injury mechanism of shoulder dislocation in patients older than 60 years of age seems to have either anterior or posterior mechanism. The diagnosis and treatment should be approached 2 weeks after dislocation.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.119-125
• /
• 2009

The primary purposes of revision repair for a failed rotator cuff repair are a relief of pain and functional improvement. Therefore, revision repair is most proper in patients with the functional deficit accompanied with the shoulder weakness as well as the persistent pain. The important factor that is considered in revision repair is a quality of torn cuff. Especially, Care must be taken to ensure that the revision repair is possible, considering the size of tendon defect, atrophy of the muscle, fatty infiltration and extent of the retraction of tendon. Revision repair of a failed rotator cuff repair is more difficult, and the functional results are less satisfactory than those of primary repair, because excessive bursal scarring and tendon retraction may be exhibited, a large or massive tear is often detected, tear has usually been present for a long time, and a quality of muscle-tendon may be poor. So, we discuss our experiences related to revision repair after a failed cuff repair that has been recently introduced through the articles.