• Journal of the Korean Institute of Navigation
• /
• v.16 no.1
• /
• pp.65-75
• /
• 1992

The Waterway System for the Very Large Ships is One of the Important System connected between Marine Transport System and Exclusive Terminal. This study analyzed the Turning Configurations and Placement of Fairway Buoys in Waterway at the Port of Kwangyang to make Optimal Suggestion of for Ship's Safe Navigation. The following Conclusions are drawn : 1) In Area Section A, Starboard hand Buoy No14 should be changed its Location and Light Rhythms, and Buoy Nos.13 '||'&'||' 16 are required their Light Rhythms to be changed. 2) Especially in Area Section B located before the Turning Basin, The Location and Light Rhythms of Nos.20 '||'&'||' 22 buoys at Starboard Hand should be changed, Port Hand No.21 also should be done, and East Cardinal Buoy located between Nos.21and 23 should be changed its Light Rhythms, or removed if possible. 3) Buoy no.19 of Lateral Port Hand in Section B should be changed "Preferred Channel to Startboard" to distinguish Main Channel from Secondary One.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.1
• /
• pp.31-39
• /
• 1994

The practical shiphandlers, such as ship's captain, pilot and mooring master, in charge of the SBM app-roaches and mooring operations of loaded VLCC should have a highly advanced shiphandling skills because of taking advantage of the wind and current from ahead without assistance of big tugboats. But now except some approaching skills in the vicinity of SBM buoy or waiting anchorage we do not have an optimal controlled approaching maneuvers in the entire course of port approaches. Consequently this study presents the optimal SBM approaches to the practical shiphandlers of VLCC and puts to use with effect in the practical operations. The conclusions of this simulation study are as follows : 1) The optimal SBM approaches in combination of Woo's Approach and a large change of heading were presented for the practical shiphandlers, 2) According to simulation of the pilotship the angle of a large change of heading for reducing headway is more than 70 degrees approximately. 3) Applied this optimal approaches to the SBM operations of simulated Port of Ulsan and confirmed the control of ship and the economy of port approaches time.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.721-728
• /
• 2012

Marine traffic safety of the Vung Tau Waterway, from port limit to Ganh Rai Gulf, plays a crucial role in the economic development of the important triangular economic zone in the south of Vietnam: Ho Chi Minh City, Dong Nai Province, Ba Ria-Vung Tau Province. This paper uses the IWRAP Mk2 program to assess marine traffic safety and shows that in the area there are three parts of fairway have highest risk of collision (from buoys No. 8-9 to buoys No. 1-2 of the Song Dinh fairway; from buoy No. 0 to buoys No. 8-9 and from buoys No. 6-9 to buoys No. 8-9A of the Sai Gon-Vung Tau fairway) and the two areas have highest risk of grounding (the Vung Tau coastline from Ganh Hao to Sao Mai and an area in the Ganh Rai Gulf). In addition, the result of a questionnaire survey on a group of Pilots shows that wind, current and rain/fog have considerable negative effect to ship handling of large vessels in this area. This paper's results will be used in the further research to discover solutions for improving marine traffic safety in the Vung Tau Waterway.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.483-490
• /
• 2022

Floating LiDAR is a system that provides a new paradigm for wind condition observation, which is essential when creating an offshore wind farm. As it can save time and money, minimize environmental impact, and even reduce backlash from local communities, it is emerging as the industry standard. However, the design and verification of a stable platform is very important, as disturbance factors caused by fluctuations of the buoy affect the reliability of observation data. In Korea, due to the nation's late entry into the technology, a number of foreign equipment manufacturers are dominating the domestic market. The west coast of Korea is a shallow sea environment with a very large tidal difference, so strong currents repeatedly appear depending on the region, and waves of strong energy that differ by season are formed. This paper conducted a study examining buoys suitable for LiDAR operation in the waters of Korea, which have such complex environmental characteristics. In this paper, we will introduce examples of optimized design and verification of ship-type buoys, which were applied first, and derive important concepts that will serve as the basis for the development of various platforms in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.347-354
• /
• 2007

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was $709,951.6m^2$. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.835-841
• /
• 2011

Wave power generation systems operated in the ocean, has been developed as large power and grid power connection systems in general. However, small wave power generation systems offer operational efficiency for the lighted (navigation aids) buoy. They simply adopts a full-wave rectification for charging battery (direct connection method). In this paper, a wave power controller based on a booster converter is developed by considering a characteristic of the wells turbine. Both direct connection and booster converter power controller is designed and tested to compare the characteristics. Experiments demonstrate that the output of the proposed controller has improved the characteristic of output power, when generator output voltage is low.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.25-32
• /
• 2021

In line with future changes in the marine environment, Aids to Navigation has been used in various fields and their use is increasing. The term "Aids to Navigation" means an aid to navigation prescribed by Ordinance of the Ministry of Oceans and Fisheries which shows navigating ships the position and direction of the ships, position of obstacles, etc. through lights, shapes, colors, sound, radio waves, etc. Also now the use of Aids to Navigation is transforming into a means of identifying and recording the marine weather environment by mounting various sensors and cameras. However, Aids to Navigation are mainly lost due to collisions with ships, and in particular, safety accidents occur because of poor observation visibility due to sea fog. The inflow of sea fog poses risks to ports and sea transportation, and it is not easy to predict sea fog because of the large difference in the possibility of occurrence depending on time and region. In addition, it is difficult to manage individually due to the features of Aids to Navigation distributed throughout the sea. To solve this problem, this paper aims to identify the marine weather environment by estimating sea fog level approximately with images taken by cameras mounted on Aids to Navigation and to resolve safety accidents caused by weather. Instead of optical and temperature sensors that are difficult to install and expensive to measure sea fog level, sea fog level is measured through the use of general images of cameras mounted on Aids to Navigation. Furthermore, as a prior study for real-time sea fog level estimation in various seas, the sea fog level criteria are presented using the Haze Model and Dark Channel Prior. A specific threshold value is set in the image through Dark Channel Prior(DCP), and based on this, the number of pixels without sea fog is found in the entire image to estimate the sea fog level. Experimental results demonstrate the possibility of estimating the sea fog level using synthetic haze image dataset and real haze image dataset.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.211-217
• /
• 2008

Natural environment, topographical conditions and marine traffic flows were investigated and questionnaire surveys were performed for the purpose of understanding the cause of marine accidents. The frequent cases of ships' dragging have happened at the anchorages of E-1, E-2 and E-3. The anchorage area is insufficient for the accommodation of a number of ships, the dolphins at the nearby piers are located near a narrow fairway. SBMs' are positioned too close to the fairway. It shows that many crossing marine traffic flows occur in all areas of the port. Marine casualties are concentrated mainly at No. 1 fairway, M1-M7 waters close to the dolphins and Gwanjeolgot, "E" anchorage and the waters close to the fairway "come and go" areas. The marine traffic flow is mainly caused by the ships' movement at the inter-port and most of the ships are the dangerous cargo carriers. And small ships like the tug-barge are moving disorderly in the ports. Furthermore, the fairway‘s layout is crossing each other. Questionnaire surveys of the users and experts shows that the LANBY that can distinguish the fairway of "come and go" ports is required.