• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7138-7145
• /
• 2015

본 연구에서는 KS C 9306에 따른 난방 제상능력 시험조건(건구온도 $2^{\circ}C$/습구온도 $1^{\circ}C$)에서 확대모형이 아닌 실제 열교환기의 전방에 디지탈 현미경과 광센서의 발광부와 수광부를 나란히 설치하여 광센서 출력전압과 서리 높이간의 연관성을 규명하기 위한 실험을 수행하였다. 150개의 실험 데이터로부터 서리높이를 예측할 수 있는 선형 상관식을 개발하여 계산한 결과, 측정값의 54%가 상관식으로 예측한 값의 ${\pm}10%$ 이내에서 일치하였으며 서리 높이가 0.3mm 이상의 실험데이터에서는 데이터의 90% 이상이 ${\pm}10%$ 이내에서 일치하였다. Xiao 등의 상관식과 비교하였을 때 출력전압 변화에 따른 서리 높이의 변화를 나타내는 기울기는 2.3% 오차 범위에서 일치하였으나 Xiao 등의 상관식은 실제 열교환기가 아닌 모사 열교환기를 사용한 이상적인 조건에서 개발되었기 때문에 절편 값에서는 큰 차이를 보였다.

• 대기
• /
• 제26권1호
• /
• pp.193-201
• /
• 2016

An anomalous cold-weather period occurred during January 2011 in East Asia, and this study investigates the event by focusing on the blocking phenomena formed at Northeastern Asia. The area of cold weather is determined to represent the characteristic features of abnormal cold temperature. The 2010/11 winter is divided into three periods P1, P2 (cold period), and P3. For the cold area ($30-50^{\circ}N$, $115-135^{\circ}E$) the corresponding cold period P2 is determined to be 39 days from 23 December 2010 through 30 January 2011. During P1 and P3 temperature anomalies from the climatological mean are small with large standard deviation compared to those of P2, which has large negative anomaly and small standard deviation. The period P2 is dominated by blocking, which was determined by distributions of 500-hPa geopotential height and potential temperature on the 2 PVU surface. Correlation-coefficient analyses show that during P2 the temperature in the cold area is related with pressure of Northeastern Asia, while the temperature during P1 and P3 is related with pressure of Northwest of Korea. Also, during P1 and P3 the temperature pattern shows eastward propagation, but during P2, a stationary pattern. All the observations imply that, during the cold period P2, the temperature in the cold area is related with blocking in Northeastern Asia. During P1 and P3 temperature pattern is related with 500-hPa geopotential height in Siberia, and this relationship is also observed in the climatological mean state.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.237-243
• /
• 2013

Objective: The present study developed an estimation method of boundary zone representative humanoids(hereafter, EBZ method) using descriptive statistics on the design target population. Background: The boundary zone method(hereafter, BZ method) generates representative humanoids at a boundary zone that statistically accommodates a designated percent of the design target population; however, the BZ method has a practical limitation because it requires a large scale anthropometric database on the design target population. Method: The EBZ method developed in the present study consisted of 3 steps. In the first step, the boundary zone of accommodating a designated percent(e.g., 90%) is formed under the assumption of normal distributions for anthropometric sizes. In the second step, cases that fall within the boundary zone are estimated using descriptive statistics(mean, standard deviation, and covariance) on the design target population. In the last step, K-mean cluster analysis is conducted for the cases, and representative humanoids are selected from each of clusters. Results: Evaluation results showed that mean accommodation percent of the EBZ method was 90.9%(range: 90.8~91.1%) which is similar to the target percent(90%). In addition, standard deviation of accommodation percent for 100 repetitions was 0.1%. Lastly, the number of representative humanoids generated by the EBZ method(n = 20) was similar to the BZ method(n = 16). Conclusion: The EBZ method can generate representative humanoids which accommodate a designated percent of the design target population using descriptive statistics. Application: The EBZ method can be utilized in the generation of humanoids for ergonomic design and evaluation of products when the large scale anthropometric database on the design target population is not existed.

• 한국ITS학회 논문지
• /
• 제20권5호
• /
• pp.75-82
• /
• 2021

국내 2020년 기준 교통사고 건수는 약 23만 건으로, 고속도로는 비반복적 정체와 높은 주행 속도로 인해 다른 도로 대비 교통사고 발생 건수당 사망자수가 2배 이상으로 나타나고 있다. 고속도로의 교통정보는 도로의 중심선을 이용한 노드, 링크를 기준으로 제공하고 있으나 세분화된 속도정보를 주지 못하고 있다. 최근 자율주행차 뿐만 아니라 일반 차량에서도 장애물 모니터링, 위치 측정을 위한 차량용 센서 장착이 일반화되고 있어, 대용량 위치 기반 데이터를 이용한 분석은 처리속도에 따라 실시간 서비스가 가능하다. 본 연구는 대용량 위치기반 개별 차량 정보의 분석을 위한 공간 기반의 맵핑 방법을 제시하였다. 경위도 각각 2개로 분할하는 4진법 기준의 분할 방법을 적용하여 개별 차량의 공간 코드를 생성하여 지오코딩 하는 방법으로 처리 속도를 대폭 증가 시켰다. 공간이 세분됨에 따라 평균속도는 유사하였으나 속도의 표준편차는 점차 감소하였으며 9회 분할 이후는 그 감소 폭이 작아 졌다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권5호
• /
• pp.446-454
• /
• 2000

Condylar process of mandible is an important and fuctionally versatile part of the mandible. There were quite large amount of investigations on the functional and anatomical adaptation of the temporomandibular joint(TMJ) to the surrounding tissues. But controversies on the mechanism of functional adaptation of the joint still exist. In this research, we investigated changes in the TMJ by the lateral deviation of the maxillary incisor to shift the mandible right, and bone the undecalcified microscopic sections with fluorescent microscope and von Kossa staining with bright field microscope. Results were as follows: 1. Lateral deviation rendered shifting and tilting of the mandible, There were, compressions in the right joint and opening of the left joint space at early stage. At the same time, both condyles shifted slightly to anterior. 2. After $2{\sim}4$ weeks, left condyle showed anterior displacement and compressions in the joint space. Right condyle showed only slight shift to the anterior. 3. Regardless of the direction of the lateral shift, anterior bite plate compressed both condyle heads until 2 weeks. 4. There are bone resorptions in the anterior aspect of the condyle head and apposition of posterior border. Bone remodeling were observed between 3 and 4 weeks. 5. After 8 weeks of the experiment, there were little differences in condylar morphology between experimental and control group, though slight shifting and compression were still present in the experimental group. Lateral deviation of mandible evoked active remodeling of the TMJ until functional and anatomical reconstruction of TMJ position was achieved.

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.50-57
• /
• 2006

이 연구의 목적은 $ProTaper^{(R)}$ system을 사용하였을 때, 각 단계별로 근관 형성 결과를 분석 하는 것이다. 20개의 레진 블락을 근관 성형 방법에 따라, 엔진 구동형 $ProTaper^{(R)}$로 전체 근관을 성형한 군을 R군, 수동형 $ProTaper^{(R)}$로 전체 근관을 성형한 군을 M군으로 하였다. 근관의 술 전, 술 후 이미지를 각 파일 단계별로 스캔한 후, 중심이동률 산출을 위해 원래의 근관 이미지와 각 단계의 파일 사용후의 이미지를 각각 중첩하였고, 근관의 변위량 산출을 위해 각 단계의 파일 사용후의 이미지와 직전 파일 사용후의 이미지를 중첩하였다. 근단공으로부터의 수직거리 1 2, 3, 4그리고 5mm위치에서 중심이동률과 근관의 변위량을 측정하였다. 실험 결과 R군의 모든지점에서 각 단계별 중심이동률과 근관 변위량은 각각 유의한 차이가 없었다 (p<0.05). M군에서 1 mm를 제외한 모든 지점에서 각 단계별 중심 이동률과 근관 변위 량은 각각 유의한 차이가 없었다 (p<0.05). 그러나 M군의 1mm 지점에서 F2 file step은 통계학적으로 큰 중심 이동률과 근관 변위량을 보였다 (p<0.05). 본 연구의 결과에서 엔진 구동형 $ProTaper^{(R)}$ 사용 시에는 각 파일 단계별 근관 변위 정도에 유의한 차이가 없었으나, 수동형 ProTaper로 근관 성형을 하였을 때 , F2 file step에서 특히 근관 변위가 크게 나타났다.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.227-233
• /
• 2012

This paper describes a novel and compact biosensing platform using an RF active system. The proposed sensing system is based on the oscillation frequency deviation due to the biomolecular binding mechanism on a resonator. The impedance variation of the resonator, which is caused by a specific biomolecular interaction results in a corresponding change in the oscillation frequency of the oscillator so that this change is used for the discrimination of the biomolecular binding, along with concentration variation. Also, a Surface Acoustic Wave (SAW) filter is utilized in order to enhance the biosensing performance of our system. Because the oscillator operates at the skirt frequency range of the SAW filter, a small amount of oscillation frequency deviation is transformed into a large variation in the output amplitude. Next, a power detector is used to detect the amplitude variation and convert it to DC voltage. It was also found that the frequency response of the biosensing system changes linearly with three streptavidin concentrations. Therefore, we expect that the proposed RF biosensing system can be applied to bio/medical applications capable of detecting a nano-sized biomolecular interaction.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.81-84
• /
• 2008

This paper discussed the validity of wind force power generation in consideration of the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind velocity, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was higher at wind power plants installed in southwestern coastal areas where wind velocity was low than at those installed in mountain areas in Gangwondo where wind velocity was high. This suggests that the shape parameter of wind distribution is low due to the characteristics of mountain areas. and the standard deviation of wind velocity is large due to the effect of mountain winds, and therefore, actual generation is low in mountain areas although wind velocity is high.

• 대한두개안면성형외과학회지
• /
• 제21권1호
• /
• pp.53-57
• /
• 2020

A mucocele is an epithelium-lined, mucus-filled cavity in the paranasal sinuses. Mucocele may develop due to scarring and obstruction of the sinus ostium caused by midface sinus trauma, such as orbital bone fracture or endoscopic sinus surgery. The authors report two cases of orbital mucocele as complications following midface sinus injury (endoscopic sinus surgery in one case, and orbital fracture repair in the other). In both cases, imaging studies showed a large orbital mucocele accompanied by bony erosion and orbital wall remodeling, compressing the ocular muscle. Using an open approach, the lesion was excised and marsupialized. The symptoms resolved, and the postoperative eyeball position was normal. Orbital mucocele may cause serious complications such as ocular symptoms, orbital cellulitis, osteomyelitis, and the formation of an abscess with the potential to invade the brain. Therefore, surgeons should consider the possibility of mucocele as a late complication of surgery and initiate an immediate work-up and surgical treatment if needed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.541-545
• /
• 1996

In this paper, The performance and functions of automatic flatness control system installed on the 4 hi-reversing mill and has been investigated under actualconditions. A new automatic flatness control system incorporates a measuring roll for measurement and correction calculations, hydraulic roll benders, selective roll cooling, and a programmable controller for interface and data logging. The test results are as following. The more the exit steel strip thickness is thick, the smaller the I value, and the more it is thin, the larger the I value. And, a complex distribution of strip tension was controlled, for example, not only a quarter buckle but also a simple center wave and edge wave. Because the tension deviation is larger at acceleration speed and deceleration speed than steady speed, so automatic flatness control system of contact type is better to adopt over 450 m/min, automatic flatness control system reduces rapidly large flatness deviation. The maximum I value of strip has been decreased to 13 I, and defects caused by poor flatness have been drastically decreased. And coolant temperature for work roll cooling system on the automatic flatness control system is better to adopt about 50-55 .deg. C.