• Journal of agricultural medicine and community health
• /
• v.45 no.3
• /
• pp.154-161
• /
• 2020

Purpose: The purpose of this study is to compare the clinical features and complications of snake bite patients in urban and rural areas. Methods: A retrospective study was conducted on patients over 18 years of age who were hospitalized for snake bites from January 2013 to December 2019. Patients were categorized into urban and rural groups according to their respective locations at the time of the snake bite and the clinical characteristics and complications of the two patient groups were researched and compared. Results: Of the 77 snake bite patients, 44 patients were categorized into the rural group (57.1%). The rura1 group showed significant differences in old age (p=0.011), delayed hospital visits (p=0.010), far hospital distance (p<0.001), high local effect score (p<0.001), high traditional snake-bite severity grading scale (p=0.008) and use of large amounts of antivenins (p=0.026). There was a significantly higher incidence of acute kidney injury (p=0.030), rhabdomyolysis (p=0.026), and coagulopathy (p=0.033) in the rural group as well as a longer hospitalization period (p<0.011). Conclusion: Snake bites that occurred in rural areas resulted in patients with more complications compared to urban areas due to farther distances from hospitals, causing a delay in antivenom treatment.

• Journal of Science and Technology Studies
• /
• v.2 no.2 s.4
• /
• pp.145-189
• /
• 2002

This paper explores into the potential contribution of welfare science and technology(WST) to meeting the challenges of ageing. Drawing on the literature about gerontechnology, this paper considers the application of scientific knowledge for welfare of an aging population. WST for the improvement of the daily functioning of the elderly people can not only prevent, delay or compensate for the declines or impairments of coginitive and physical functions (by assistive technology) but also enhance personal ability to overcome problems either by supporting the person's abilities (by supportive technology) or by changing the environment (by public welfare technology). This paper draws attention to a paradigm change in the conceptualization of disability and its ramifications for the role of technology and aging. A range of approaches such as Barrier-Free design, Universal Design points to new directions of WST in which products and services are devised to improve the quality of life for all people, and hence enhancing the socio-economic vitality. It is suggested that the future of welfare science and technology will be based in large measure on its goal to reduce or prevent individual and structural lag in the relationships between people and their environments. Addressing issues of the broader physical and social environment will emphasize the goal of prevention and the view that environmental needs for aging population are changing over time.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.425-431
• /
• 2015

Since the construction of Kori 1 was completed in 1978, the construction projects for nuclear power plant are increasingly expanded into domestic and foreign sites. However, some of construction sites of nuclear power plant have the problems of process delay and cost loss due to lack of ability of risk management. The construction of reactor containment building in nuclear power plant is especially dotted with many risk factors because it needs professional skills and large-scale resources due to long duration compared with different construction phase. Therefore, it needs the study that analyzes risk factors expected in construction of reactor containment building and suggests way of stable performance of projects. So, this study assesses risk factors of construction of reactor containment building. For the objectives, this study uses survey for group of minority specialists of 36 experts. The risks of 24 factors is classified by criterions of process, cost, safety, and quality and the results of assessment is analyzed by analytic hierarchy process. As the results, the importance and priority of risk factors classified by each criterion were calculated and the applicability of analytic hierarchy process was identified to analyze risk factors of nuclear power plant construction. These will be baseline data for risk management in construction phase of reactor containment building.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1908-1924
• /
• 2001

Interoperability and inter-working in the various network and media environment with different technology background is very important to enlarge the opportunity of service access and to increase the competitive power of service. The ITU-T and advanced counties are planning ahead for provision of GII enabling user to access advanced global communication services supporting multimedia communication applications, embracing all modes of information. In this paper, we especially forced the heterogeneity of end user applications for multimedia networking. The heterogeneity has several technical aspects, like different medium access methods, heterogeneous coding algorithms for audio-visual data and so on. Among these elements, we have been itemized bit rate shaping algorithm on the compressed moving video. Previous manipulations of video has been done on the uncompressed signal domain. That is, compressed video should be converted to linear PCM signal. To do such a procedures, we should decode, manipulate and then encode the video to compressed signal once again. The traditional approach for processing the video signa1 has several critical weak points, requiring complexity to implement, degradation of image quality and large processing delay. The bit rate shaping algorithm proposed in this paper process the manipulation of moving video on the completely compressed domain to cope with above deficit. With this algorithms. we could realized efficient video bit rate shaping and the result of software simulation shows that this method has significant advantage than that of pixel oriented algorithms.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1387-1394
• /
• 2013

Allergies are one of the most common chronic diseases during childhood. While the prevalence of allergic disease in children is increasing dramatically, few studies have evaluated the risk and preventive factors related to this health condition, especially in South Korea. The purpose of this case-control study was to evaluate independent determinants of allergic disease, and to examine whether it is associated with growth and other health conditions in childhood. The current study included 209 cases and 311 age and sex-matched controls (fifth and sixth graders) residing in Daegu, South Korea. Environmental data was collected, including child and family histories of allergies, birth information, and reaction to weaning foods during infancy. In addition, current dietary habits (assessed by 2 day-24 hr food records), health conditions, and anthropometric data were obtained through questionnaires and student health check-ups at the school. Based on chi-square tests, cases had a significantly higher prevalence of having a disease at birth, an allergic reaction to weaning foods, frequent hospital visits, and frequent experiences of the common cold and digestive diseases. In addition, significantly more mothers had a higher education in the cases compared to controls. Based on multivariable conditional logistic regression analysis, factors significantly associated with greater odds for having allergies were parental (OR=21.42) and fraternal (OR=14.40) histories of allergies. The anthropometric measures showed that cases tended to be shorter in height and lighter in weight than the controls, but these differences were not statistically significant. These findings may indicate that current nutrient intakes may not be the only critical factor associated with delayed growth delay in the allergic group. A well-planned, large cohort study is warranted to confirm our findings in the future.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.37-43
• /
• 1999

Modules of the system that requires large capacity and high-speed information processing are implemented in the form of MCM that allows high-speed data processing, high density circuit integration and widely applied to such fields as ATM, GPS and PCS. Hence we developed the ATM switching module that is consisted of three chips and 2.48 Gbps data throughput, in the form of 10 multi-layer by Cu/Photo-BCB and 491pin PBGA which size is $48 \times 48 \textrm {mm}^2$. hnologies required for the development of the MCM includes extracting parameters for designing the substrate/package through the interconnect characterization to implement the high-speed characteristics, thermal management at the high-density MCM, and the generation of the testability that is one of the most difficult issues for developing the MCM. For the development of the ATM Switching MCM, we extracted signaling delay, via characteristics and crosstalk parameters through the interconnect characterization on the MCM-D. For the thermal management of 15.6 Watt under the high-density structure, we carried out the thermal analysis. formed 1.108 thermal vias through the substrate, and performed heat-proofing processing for the entire package so that it can keep the temperature less than $85^{\circ}C$. Lastly, in order to ensure the testability, we verified the substrate through fine pitch probing and applied the Boundary Scan Test (BST) for verifying the complex packaging/assembling processes, through which we developed an efficient and cost-effective product.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.17-27
• /
• 2003

In general, an airport access system has influenced on airport terminal operation. The congestion and delay in service facilities at an airport are definitely depended on the patterns of passenger arrival behavior and time spent in a terminal. Therefore, it is necessary to analyze the passenger arrival behavior at an airport to improve the operations at passenger terminal. Passenger arrival patterns to an airport are mainly depended on factors such as the length of access time. reliability of access time. and provision of transport modes, etc. The focus of this paper is to estimate the relationship between the length of access time and passenger's total time spent to board aeroplane. For this, passenger surveys were conducted at the Gimpo International Airport for a large airport and Sacheon Airport for a small size airport. The mathematical relationship between arrival time at an airport prior to the scheduled time of departure(STD) and access time spent was then estimated. It is considered that the results of this study can be used to reduce congestion and delays, thereby to improve the efficiency of the passenger services at the airports.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.171-183
• /
• 1989

A general effect for cell proliferation has been incorporated into Roesch's survival equation (Accumulation Model). From this an isoeffect formula for the low dose-rate regimen is obtained. The prediction for total doses equivalent to 60Gy delivered at the constant dose-rate over 7 days agrees well with the dose-time data of Paterson and of Green, when the parameter ratio A/B (${\approx}{\alpha{\mu}}/2{\beta}\;where\;{\mu}$ is the repair rate) is chosen to be 0.7Gy/h. When a constant proliferation rate and known facts of division delay are assumed, an isoeffect relation between low dose-rate treatment and acute dose-rate treatment can be derived. This formula in the regimens where proliferation is negligible predicts exactly the data of Ellis that 8 fractions of 5 Gy/day for 7 days are equivalent to continuously applied 60Gy over 7days, provided the A/B ratio is 0.7 Gy/h and the $\alpha/\beta$ ratio is 4Gy. Overall agreement between the clinical data and the predictions made by the formula at the above parameter values suggests that the biologcal end points used as the tolerance level in the studies by Paterson, Green, and Ellis all agree and they are not entirely the early effects as generally assumed. The absence of dose-rate effects observed in the mouse KHT sarcoma can better be explained in terms of a large value for the A/B ratio. Similarly, the same total dose used independently of the dose-rate to treat head and neck tumors by Pierquin can be justified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.