• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.329-343
• /
• 2015

This study aimed to observe the effect of a novel concept (referred to as the flap extension) implemented on the leading edge of the flap of a three element high lift device. The high lift device, consisting of a flap, main element and slat is designed around an Airbus research profile for sufficient take off and landing performance of a large commercial aircraft. The concept is realised on the profile and numerically optimised to achieve an optimum geometry. Two different optimisation approaches based on Genetic Algorithm optimisations are used: a zero order approach which makes simplifying assumptions to achieve an optimised solution: as well as a direct approach which employs an optimisation in ANSYS DesignXplorer using RANS calculations. Both methods converge to different optimised solutions due to simplifying assumptions. The solution to the zero order optimisation showed a decreased stall angle and decreased maximum lift coefficient against angle of attack due to early stall onset at the flap. The DesignXplorer optimised solution matched that of the baseline solution very closely. The concept was seen to increase lift locally at the flap for both optimisation methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.98-116
• /
• 2006

For the next two decades the civil aviation industry is expected to grow. Both Airbus and Boeing predict a delivery of almost 20,000 new Large Civil Aircraft (LCA). LCA is defined as a large civil jet aircraft with 100 seats or more. Airbus offers the Superjumbo, A380 (>555 seats), while Boeing presents the Dreamliner, B787 (200 – 300 seats). Their philosophies are very different. In the wake of B787, Airbus intends to offer a new aircraft, A350, as the competitor against B787, with the same engines developed for B787. The U.S. government pushed by Boeing, on the day of October 6, 2004, filed a suit against Airbus for wrongful subsidy to the World Trade Organization (WTO). A brief overview is given on the LCA development status in the world commercial aircraft market. Since there have been little changes in engine and avionics manufacturers in the LCA industry, the airframe area only is the object of this study. An analysis is carried out to find out the differences in development and marketing strategies of two major LCA manufacturers, Airbus and Boeing. The authors predict that Boeing will recapture its No. 1 position soon, while the leading edge in technology may be slipped away from Boeing.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.153-180
• /
• 2020

This study is meaningful in finding out what legal and policy issues need to be improved in order to foster the aircraft industry, which is relatively underdeveloped compared to the fact that some heavy industries, such as the automobile industry and shipbuilding industry, have achieved a high level of production and technology globally. Korea's aircraft industry has been growing at a slower pace than other industries, largely due to the country's economic growth and the lack of a market structure to properly use variables such as the level of development in related industries, aircraft technology and demand for aircraft manufacturing. While most industries are privately led by the market structure of the competition system, heavy industries such as the aircraft industry generally grow under the market structure of the incomplete competition system, because only by securing huge initial investment costs, high technology, and sufficient demand, they can maintain minimum economic feasibility. The Korean aircraft industry was focused on developing and mass-producing military aircraft focusing on military demand, but it sought to turn the tide by signing the BASA (Bileral Aviation Safety Agreement) with the U.S. A preliminary feasibility study was conducted in 2010 to develop next-generation medium-sized aircraft, but was cancelled due to differences in position with Canada's Bombardier, which is subject to the concourse, and Korea Aerospace Industries (KAI) is pushing for the production of Bombardier's Q400 license on its own. Compared to the mid-to-large sized civil aircraft that are facing difficulties in development, KAI and KARI are successfully developing technologies to unmanned aerial vehicles and civil helicopters. In addition, the unmanned aerial vehicle sector is not yet suitable for manufacturers that have an exclusive global influence, so we believe that it is necessary to pursue government-led research and development projects with a focus on the areas of commercial helicopters and unmanned aerial vehicles in order to foster the aircraft industry in the future. In addition, since military aircraft such as KT-1 and T-50 are currently being exported smoothly, and it cannot be overlooked that the biggest demand for aircraft manufacturing in the Korea is the military, it is necessary to push forward national R&D projects and defense R&D program simultaneously to enable both civilian-military development. However, there are many differences between the two projects in the way they are implemented, the department in charge and the royalty system. Through this study, we learned about the technology ownership and implementation rights of national R&D projects and defense R&D programs, as well as the royalty system. In addition, problems with the system were identified and improvement measures were derived.

• IE interfaces
• /
• v.20 no.3
• /
• pp.298-308
• /
• 2007

Radio Frequency Identification (RFID) is one of Identification Technologies today. Many of the large retailers in the United States and Europe have established requirements for their suppliers to use RFID technology in 2004. Recently Airbus and Boeing have announced plans to develop a single RFID specification to be used by both companies to use RFID tags to identify commercial aircraft parts. However, it does not mean the end of barcode and it may take several years before the wide adoption of the RFID. This is because a precise business process reengineering is required with technology itself to get the potential benefits of RFID. In this paper, we introduce an RFID enabled air baggage handling process which has been developed and tested recently. We believe our study would give a good guideline for further researches on RFID application in the aviation industry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.882-886
• /
• 2007

People living in the large cities are exposed to high level noise due to road-traffic, railway-traffic and aircraft. Nowadays, some researches are ongoing to reduce the noise by using noise map. However it has to be decided which prediction model is the most suitable in Korea. In this study, it has been focused on railway noise prediction models which are employed in a commercial software(Sound Plan) and developed by Korea Railroad Research Institute, and comparative study of the prediction models has been made.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.241-251
• /
• 2011

Most large commercial aircrafts and high performance military aircrafts use fly-by-wire (FBW) or fly-by-light systems to improve their controllability, comfort, and safety. A flight envelope protection technique is used with flight control systems utilizing the FBW technique. Such flight envelope protection systems prevent these aircraft from exceeding the structural/aerodynamic limits and control their surface limits. This is accomplished by predicting the values of the future state variables and adaptively compensating the control action. In this study, the conventional dynamic trim algorithm of the flight envelope protection is modified to increase the method accuracy and to handle cases with multiple variables. Numerical simulation is also performed to verify the performance of the proposed method.

• Composites Research
• /
• v.28 no.4
• /
• pp.219-225
• /
• 2015

Air spoiler, which can reduce the drag during operation, can be considered as a possible means to reduce carbon dioxide emission and to increase fuel efficiency. In this study, a composite air spoiler was designed and tested by static and repeated loads. The Green Water Pressure of 0.1 MPa a ship experiences during operation was perpendicularly applied to the air spoiler. Air spoiler was manufactured with sandwich panel which has glass fabric face and balsa core. Multiple sandwich panels were assembled to steel frame by bolt joint. The joint was designed to have bearing failure and examined by static and fatigue tests. Tests showed that the designed joint has enough margin of safety to endure joint failure. The developed sandwich panel to air spoiler is planned to be applied to a large scale commercial ship.