• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.77-83
• /
• 2012

Recently, For the most efficient use of spaceis, high-rise buildings tend to increase. So it is with Korea, too. Besides, today high-rise buildings grows due to fire damage to life and property at large. In this study, Through analysis of domestic and foreign fire case and listen to the high-rise building fire managers, tenants, professionals advice, when the fire from the high-rise building, effective fire suppression tactics should we wish to research ways. In addition, we have used the car gondola was installed outside the fire suppression methods in studying. So that fire-fighting is a fire place can be reached quickly, many casualties and property damage, will be reduced.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.652-656
• /
• 2004

Crashworthy design of trains is now indispensable procedure in modern railway vehicle design for ensuring the safety of Passengers and crew. It is now widely recognized that a more strategic approach is needed in order to absorb higher level energy in a controlled manner and minimize passenger injuries effectively. The first design step in this strategic approach is the design of the front end structure(so called HE extremities) to absorb a large part of total impact energy and then the structure of passengers non-accommodation zones(so called LE extremities) is designed to absorb the rest of impact energy. In this paper, the passengers entrance door area is selected as the LE(low energy) extremities and the design of the LEE was carried out. The main part of LEE design procedures is the design of energy absorbing tubes. For this purpose, the several tube candidates are introduced and compared to each others with numerical crash simulation.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.77-81
• /
• 2006

In this study, design parameters of ice-transiting vessels in the world, currently in service or under construction, were collected and a database of principal particulars for each ship was established. To understand the recent design trend, ice-transiting vessels were categorized into four groups, i.e., conventional icebreakers, icebreaking tug/supply/research vessels, ice-strengthened passenger/car ferry and ice-strengthened cargo vessels. Changes in principal particulars for each group were reviewed and summarized. It was found that the most significant change in the design of ice-transiting vessels was the increment of large size commercial cargo vessels. It is believed that the recent hike of oil prices and booming of Russian economy has resulted in the need for year-round operation with bigger ships in the Baltic Sea and in the Sea of Okhotsk and also along the Northern Sea Route in Russian Arctic Sea.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.1-25
• /
• 2020

This study analyzed key success factors of Korean car-sharing enterprises, Socar and Greencar, and the responsive strategies of Korean car-manufacturing company, Hyundai Motor Group, in the face of emerging sharing economy under the specific economic and regulatory system in Korea. The outcomes of the analysis are as follows. 'Timely market entry' in early startup phase and 'use of external resources' in early growth phase were key success factors common to both Socar and Greencar. However, the differences in the eventual business directions of the two companies also resulted in different key success factors in the expansion phase of their business. For Socar which focused on maintaining its independence and the external growth of B2C business, customer relation marketing and sufficient capital raising were key success factors. For Greencar which became a part of a business group and focused on improving the efficiency of business operations, timely market entry (B2B market) was key success factor. The use of external resources and cooperation with large corporations emerged as key success factors common to both companies in the rapid growth phase. The responsive strategies of the Hyundai Motor Group were collaboration, investment and direct management of DeliveryCar. The short-term goal of the responsive strategy was the operation of test-bed in collaboration with car-sharing company while the mid/long term goal was planning new mobility services by utilizing collected data. Securing opportunities for early market dominance for autonomous car industry was also found to be an important goal.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.207-211
• /
• 2004

The final goal of this research is to establish the relative dangerousness D/B for factors on seakeeping performance. This D/B is essential to develope the seakeeping performance evaluation system built-on-ship. The system is composed of the apparatus for measuring a vertical acceleration to be generated by the ship's motions, computer for calculating the synthetic seakeeping performance index and monitor for displaying the evaluating diagram of navigational safety of ship. In this paper, a methodology on the establishment of the relative dangerousness D/B for factors on seakeeping performance is presented by a numerical simulations, playing an important role on the algorithm of the program for calculating the synthetic seakeeping performance index. Finally, It is investigated whether the relative dangerousness D/B can be realized an accurate values according to the loading conditions, weather conditions, wave directions end present ship's speed of a model ship.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.329-334
• /
• 2009

The various behaviors of vehicular traffic flow are generated through both car-following and lane-changing behaviors of vehicles. Especially lane-usage varies by lane-changing behaviors. In the area of microscopic vehicle simulation, a lane-changing model connected to a car-following model parallel is essential to generate both various traffic flows relationships and laneusages. In Korea, some studies on car-following models have been reported, but few studies for lane-changing models stay in the beginning stage. In this paper, a two-lane changing model for the simulation modeling of large freeway network is introduced. The lane-changing model is developed based on CA (Cellular Automata) model. The developed model is parallel combined with an existing CA car-following model and tested on a closed link system. The results of simulation show that the developed model generates the various behaviors of lane usage, which existing CA lane-changing models could not generate. The presented model is expected to be used for the simulation of more various freeway traffic flows.

• Journal of Ship and Ocean Technology
• /
• v.5 no.1
• /
• pp.14-29
• /
• 2001

Concept and preliminary structural design methods, including large scale FEM analysis and optimisation, for large passenger ships, car passenger and RoRo/ passenger ships are dis-cussed. Applications and experiences in practical design usage are presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1999-2007
• /
• 2013

The key characteristics of two-lane-and-two-way traffic flow are platoon and overtaking caused by low-speed vehicle such as truck. In order to develop two-way traffic flow model comprised of CF(car-following) and overtaking model, it is essential to develop a car-following model which is suitable to two-way traffic flow. Short distance between vehicles is caused when a high-speed vehicle tailgates and overtakes foregoing low-speed vehicle on two-way road system. And a vehicle following low-speed vehicle decides to overtake the front low-speed vehicle using suitable space within the headway distribution of opposite traffic flow. For this reason, a two-way CF model should describes not only running within short gap but also headway distribution. Additionally considering domestic two-way-road size, there is a on-going need for large-network simulation, but there are few studies for two-way CF model. In this paper, a two-way CA model is developed, which explains two-way CF behavior more realistic and can be applied for large road network. The experimental results show that the developed model mimics stop-and-go phenomenon, one of features of congested traffic flow, and efficiently generates the distribution of headway. When the CF model is integrated with overtaking model, it is, therefore, expected that two-way traffic flow can be explained more realistically than before.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.213-220
• /
• 2018

The automobile industry in Korea is a very large industrial sector. Nowadays, as the interest in low carbon green growth grows all over the world, it is time to actively secure future competitiveness of the automobile industry. Therefore, it is essential to study consumer attitudes and intentions for electric vehicles at the time when technological and social changes are expected. This study was conducted to investigate the acceptability and preference of electric vehicle for 250 people. The results are as follows. As the monthly income and the number of residents increased, the decision was made to accommodate the electric vehicle. The larger the effect of the electric vehicle on the consumers, the more the electric car decided to accommodate the electric car. In addition, three demographic characteristics (monthly income, number of residents, residence type) showed that there was a difference in satisfaction of electric vehicles. As a result of analyzing the satisfaction level of the electric vehicle, it was found that the electric vehicle has a satisfactory effect on the consumer, the electric vehicle is about 3.5 times more satisfying, and the larger the interest of the electric car is, the more the electric car is about 2.1 times.