• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.251-252
• /
• 2013

Most of the Historic Preservation Areas are very vulnerable to disasters. The aim of this study is to build probability of street blockade for evacuation routes planning from each house to an evacuation place at a large-scale disaster in such a historic preservation area. The study area is Hamanaka Machi Happongi Shuku in Kashima city, Saga Prefecture, which has been designated as a preservation district of traditional buildings. To achieve this aim, we referred to the formula for probability of street blockade for normal city area made by Tokyo Fire Agency. We revised it, considering the width of street under 4 m, structure of houses along the street, and the distance from the house to main street with the width over 4 m. Then, we applied the revised formula to the study area.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1349-1358
• /
• 2014

This study suggests plan of green space management based on the result of research apprehending the characteristic through sorting types of city thermal environment targeting summer which thermal pollution is the most serious. Considering anthropogenic heat, development level of wind road, thermal environment, as a result of types of thermal environment process, it is appeared 36 types, and 10 types is relevant of this research subject. Type I-1, size of building is large, artificial covering area is wide, and thermal load of anthropogenic heat is high, type II-1, development condition of wind road is incomplete as IIlevel, entering cold air is difficult and thermal management and improvement is needed area. Type III-1, scale is large and it is area of origin of cold air, development level of wind road is mostly favorable, type III-2 is revealed as smaller scale than III-1, and small area of origin of cold air. Type IV, anthropogenic heat is $81{\sim}150W/m^2$, average, but development function of wind road is very favorable. Type V, large area of thermal load and the origin of cold air are distributed as similar ratio, and level of development function of wind road is revealed as II level. According to standard of type classification of thermal environment, as a result of suggesting plan of green space management and biotops area ratio, type I-1 is buffer green space and waterway creation, goal biotops area ratio 35%, type II-1 afforestation in site and goal biotops area ratio 40%, type III-1, preservation plan to display the current function continuously is requested. Type IV suggests afforestation of stream current, and type V suggests quantitative increase of green space and goal biotops area ratio 45%.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.5
• /
• pp.233-241
• /
• 2000

This paper presents a systematic design procedure of $H_{\infty}$ controller of TCSC for damping low frequency inter-area oscillations in large power systems. Sensitivities of the inter-area mode for changes in line susceptance are computed using the eigen-sensitivity theory of augmented system matrix and TCSC locations are selected using the line sensitivities. The reduced model required for designing a manageable-size $H_{\infty}$ controller is obtained using the reduced frequency domain system identification method and the various weighting functions are tuned systematically to provide a robust performance. The proposed $H_{\infty}$ controller proved to be very effective for damping the inter-area mode of the large KEPCO power system.

• Journal of Sensor Science and Technology
• /
• v.18 no.2
• /
• pp.139-146
• /
• 2009

A Multilayered microelectrode design is presented for large area travelling wave dielectrophoresis (TwDEP) separators. Most of typical TwDEP chip has been arrayed with 1000 electrodes in $20{\times}20\;mm^2$. However, there is a limitation of the device area that is critical in throughput, because when the area of TwDEP becomes larger, the resistance of microelectrodes for bus bar is also increased. In this paper, we successfully developed a novel TwDEP chip with extremely large area ($31{\times}25\;mm^2$) by a unique multilayered bus bar design. According to the resistance simulation of our microelectrodes, it is possible to realize a TwDEP chip with an infinite longitudinal length. We demonstrated the feasibility of our suggestion with latex microbeads and showed the potential of extremely high throughput separation with TwDEP technique.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.76.1-76.1
• /
• 2014

We investigate the solar flare and CME occurrence rate and probability depending on sunspot class and its area change. These CMEs are front-side, partial and full halo CMEs associated with X-ray flares. For this we use the Solar Region Summary(SRS) from NOAA, NGDC flare catalog, and SOHO/LASCO CME catalog for 16 years (from January 1996 to December 2011). We classify each sunspot class into two sub-groups: "Large" and "Small". In addition, for each class, we classify it into three sub-groups according to sunspot class area change: "Decrease", "Steady", and "Increase". In terms of sunspot class area, the solar flare and CME occurrence probabilities noticeably increase at compact and large sunspot groups (e.g., 'Fkc'). In terms of sunspot area change, solar flare and CME occurrence probabilities for the "Increase" sub-groups are noticeably higher than those for the other sub-groups. For example, in case of the (M+X)-class flares of 'Dkc' class, the flare occurrence probability of the "Increase" sub-group is three times higher than that of the "Steady" sub-group. In case of the 'Eai' class, the CME occurrence probability of the "Increase" sub-groups is five time higher than that of the "Steady" sub-group. Our results demonstrate statistically that magnetic flux and its emergence enhance solar flare and CME occurrence, especially for compact and large sunspot groups.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.27-36
• /
• 2009

Lately construction companies are differentiating the outdoor spaces of apartment complexes to satisfy the needs of residents by providing underground parking area and variety of outdoor community spaces. Building walking networks through residential unit area, the major passage area and the entrance area of the complexes is very important factor to increase the use of the outdoor environment in the complexes. The purpose of this study is to evaluate the characteristics and the elements for the planning of exterior pedestrian spaces carefully through the analysis of current large-scale apartment complexes. In this study, the utilization of space, the connectivity to other spaces and the application of Universal design were evaluated through site visits in 5 large-scale apartment complexes. As a result, the utilization of space is well applied in the most of complexes especially in residential unit area. The connectivity to other spaces has low application compared to the others. Universal design is also well applied except sub criteria for the blind in most of complexes. This study will be able to help in providing better exterior pedestrian environment for residents in apartment complexes.

• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.56-61
• /
• 2022

Recently, the expansion of the domestic solar market due to the promotion of eco-friendly and alternative energy-related policies is promising, and it is expected to lead the high-efficiency/high-power module market based on M10 or larger cells to reduce LCOE, 540-560W, M12 based on M10 cells Compared to the existing technology with an output of 650-700W based on cells, it is necessary to secure competitiveness through the development of modules with 600W based on M10 cells and 750W based on M12 cells. For the development of high efficiency/high-power n-type bifacial, it is necessary to secure a lightweight technology and structure due to the increase in weight of the glass to glass module according to the large area of the module. Since the mechanical strength characteristics according to the large area and high weight of the module are very important, design values such as a frame of a new structure that can withstand the mechanical load of the Mechanical Load Test and the location of the mounting hole are required. In this study, a structural analysis design model was introduced to secure mechanical reliability according to the enlargement of the module area, and the design model was verified through the mechanical load test of the actual product. It can be used as a design model to secure the mechanical reliability required for PV modules by variables such as module area, frame shape, and the location and quantity of mounting holes of the structural analysis model verified. A relationship of output drop can be obtained.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.1
• /
• pp.1-14
• /
• 2019

Large landslide is a type of mass movement that causes drastic landform changesin a short period, and it causes huge human and property damage over a large area. The purpose of this study is to categorize the types and characteristics of large landslides around the Kokomeren River basin, Kyrgyzstan and to discuss the geomorphic development after the large landslides. The topographic analysis about a total of 20 landslides documented collapsed volumes of 0.01 to 1.10 km³, height drops of 180 to 1,770 m, and runout distances of 1,200 to 5,400 m. Rock avalanche and rockslide are identified as major types of large-scale landslides in the study area. Rock avalanches can be divided into P-type, J-type, and S-type based on the features of slope failure and kinematic characteristics of rock debris. Landslide synchronistic landforms such as trimlines, transverse ridges, longitudinal ridges, levees, and hummocks are well developed in the rock avalanche. The pieces of evidence of landslide dam, landslide-dammed lake, and remnant outburst flood deposits are observed in the upstream and downstream where the rockslides occurred. The Ak-Kiol landslide dam is the best example of a geomorphic development due to lake spillover and the large landslides were likely to be triggered by huge paleo-seismic events.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.89-96
• /
• 2006

In this study, fabrication of the large area silicon mirror is accomplished by anisotropic wet etching using micromachining technology for implementation of integrated slim optical pickup and the process condition is also established for improving the mirror surface roughness. Until now, few results have been reported about the production of highly stepped $9.74^{\circ}$ off-axis-cut silicon wafers using wet etching. In addition rough surface of the mirror is achieved in case of tong etching time. Hence a novel method called magnetorheolocal finishing is applied to enhance the surface quality of the mirror plane. Finally, areal peak to valley surface roughness of mirror plane is reduced about 100nm in large area of $mm^2$ and it is applicable to optical pickup using infrared wavelength.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.8
• /
• pp.673-680
• /
• 2015

A roll-to-roll (R2R) continuous manufacturing system for a carbon-nanotube (CNT)-/silver-nanowire (AgNW)- based large-area transparent conductive film was introduced in this study. The systemic guidelines of the R2R slot-die coating process including roll eccentricity, wrap angle, pump accuracy, and blower influence were discussed. To simulate the coating phenomenon, we investigated the governing parameters of the coating process by incorporating the estimated relative thickness that was defined by combining the viscocapillary model and volume model. By using experimental and mathematical approaches, an excellent transparent conductive layer with a $40{\Omega}/{\Box}$ sheet resistance and 88 % transmittance was obtained; moreover, a dimensionless number identifies the correlation between the transparent conductive film and the anti-reflection film.