• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1259-1265
• /
• 2021

In the present study, a large-area hybrid gamma imaging system was designed by adopting coded aperture imaging on the basis of a large-area Compton camera to achieve high imaging performance throughout a broad energy range (100-2000 keV). The system consisting of a tungsten coded aperture mask and monolithic NaI(Tl) scintillation detectors was designed through a series of Geant4 Monte Carlo radiation transport simulations, in consideration of both imaging sensitivity and imaging resolution. Then, the performance of the system was predicted by Geant4 Monte Carlo simulations for point sources under various conditions. Our simulation results show that the system provides very high imaging sensitivity (i.e., low values for minimum detectable activity, MDA), thus allowing for imaging of low-activity sources at distances impossible with coded aperture imaging or Compton imaging alone. In addition, the imaging resolution of the system was found to be high (i.e., around 6°) over the broad energy range of 59.5-1330 keV.

• Applied Microscopy
• /
• v.50
• /
• pp.14.1-14.6
• /
• 2020

Scanning electron microscopy (SEM) plays a central role in analyzing structures by imaging a large area of brain tissue at nanometer scales. A vast amount of data in the large area are required to study structural changes of cellular organelles in a specific cell, such as neurons, astrocytes, oligodendrocytes, and microglia among brain tissue, at sufficient resolution. Array tomography is a useful method for large-area imaging, and the osmium-thiocarbohydrazide-osmium (OTO) and ferrocyanide-reduced osmium methods are commonly used to enhance membrane contrast. Because many samples prepared using the conventional technique without en bloc staining are considered inadequate for array tomography, we suggested an alternative technique using post-staining conventional samples and compared the advantages.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.635-645
• /
• 2017

The industry of character toys is increasing and new characters are constantly being developed. However, the development of 2D cover patterns for toys is time-consuming due to frequent pattern modifications made through trial and error. Studies are now underway to obtain 2D clothing patterns from 3D body data, however, little research has been done on 2D pattern of character toys. This study suggests efficient guidelines to develop 2D cover patterns with a reasonable accuracy and processing time. Two 3D models of a dog and rabbit were used to develop 2D cover patterns. Independent variables of this study are set as 3 levels of triangle area (small, medium, and large) that influence the efficacy of 3D and 2D pattern development. The determination of the appropriate triangular area was based on the area and shape change of the 2D pattern. A medium or large triangle area was shown to be suitable for a character dog with a smooth curved surface. However, the appropriate triangle area was small if the characteristics of the curved surface are complicated as in the case of rabbit. The head of a dog (a double-curved surface) and the curved forepaw of a rabbit (a triangular area) should be small when the characteristics of the curved surface (such as the hind leg of a rabbit having a large convex surface and a small surface area) are complicated. Grouping by 3D surface characteristics could be a suitable guideline for the triangle area selection.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.193-194
• /
• 2012

Most of the Historic Preservation Areas are very weak to fire disasters. The aim of this study is to build a proposal-scheme for evacuation routes planning at a large-scale disaster in a historic preservation area. The study area is a preservation area called "Hizen-Hama-Shuku" which has many straw-roofed wooden houses in Kashima city, Japan. To achieve this aim, outline of the scheme is discussed. The proposal-scheme of evacuation routes consists of objectives to propose, target time to evacuate for the refuge place, evaluation method, and procedures. The existing condition and the measures are evaluated using the software "SimTread".

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.77-97
• /
• 2024

This study aims to examine the distinctions in evaluation index items between overseas and domestic ecological area-related systems, derive analytical indicators, and assess recently completed apartment complexes before and after the implementation of overall ecological area ratios. The objective is to analyse variances in the application of ecological area characteristics, categorizing them into ecological area analysis indicators and presenting their implications. The spatial scope covers completed apartment complexes in both metropolitan and non-metropolitan areas. Thirty-six completed apartment complexes were selected for analysis, and basic ecological area data were compiled. Subsequently, the data was utilized to categorize three analysis indicators-ecological area ratio, ecological area diversity, and ecological area connectivity-by metropolitan and non-metropolitan areas, as well as by type of apartment complex (sale housing versus rental housing) and size (large-scale, medium-scale, and small-scale). Results of the analysis indicate higher ecological area ratios and greater diversity in ecological area spatial types in metropolitan areas compared to non-metropolitan areas, and in pre-sale housing complexes compared to rental housing complexes. Mediumand large-scale apartment complexes exhibit higher ecological area ratios, with ecological area diversity being more pronounced. Ecological area connectivity reveals more numerous and varied connection points and types in metropolitan areas than in non-metropolitan areas. Implications of this study suggest that large-scale development should prioritize securing ecological area ratios and diversity in apartment complexes. Enhancing biodiversity necessitates establishing connections within and beyond the ecological area network of the complex. Future research should focus on linking the ecological area network within the complex.

• Journal of the Korean Regional Science Association
• /
• v.40 no.2
• /
• pp.75-89
• /
• 2024

As the problem of lowering the efficiency of urban services in small and medium-sized cities in the non-metropolitan area intensifies, the necessity of developing a railway station area is being emphasized to form a compressed urban space through regional bases. Although major station areas in large cities are being developed in the form of complex, the analysis of the development location characteristics of the small and medium-sized city station areas is insufficient. The purpose of this study is to analyze the characteristics of development project conditions and potential demand in the high-speed rail station areas across the country, identify the differences in locational characteristics according to the type of city, such as 'metropolitan city', 'large city in non-metropolitan city', 'medium and small city in non-metropolitan city', and find out the appropriate development method. As a result of the analysis, it was analyzed that the 'metropolitan area metropolitan area' has high potential demand and poor business conditions. On the other hand, in the case of the non-metropolitan area, it was analyzed that the 'small and medium-sized city station area' has good business conditions and low potential demand characteristics, and the 'large city station area' has intermediate characteristics. This suggests the need for different development methods in the development of metropolitan and small and medium-sized city station areas. The analysis results of this study show that it is desirable to encourage private participation in large-scale metropolitan station areas, which require large-scale input, to maximize potential demand, and to encourage private participation through public-led projects based on favorable business conditions or development based on regional characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.231-236
• /
• 2004

The area of flat glass panel displays such as LCD (Liquid crystal display) and PDP (Plasma display panel) has been increased more than 2 $\times$ 2 m$^2$ for productivity improvement. However, such a large panel area incurs large panel deflection during panel transfer using robots or AGV (Automated guided vehicle) systems. Therefore, electronic industries are making an effort to find an alternative transfer system for the large glass panels with small deflection. The air conveyor with porous pads is one plausible solution, but it becomes expensive because the large porous pads cost much and air consumption increases as the panel area increases. In this work, a simple air slit levitating conveyor was devised to lower the equipment cost and to reduce the air consumption of system. The air flow model between the LCD glass panel and conveyor was constructed and its validity was verified by experiments. To minimize the air consumption, the conveyor dimensions were optimized, and the air consumptions between the air conveyors with the air slit and that with the porous pad were compared.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.112-116
• /
• 2018

Electric double layer capacitors (EDLCs) are promising candidates for energy storage devices in electronic applications. An EDLC yields high power density but has low specific capacitance. Carbon material is used in EDLCs owing to its large specific surface area, large pore volume, and good mechanical stability. Consequently, the use of carbon materials for EDLC electrodes has attracted considerable research interest. In this paper, in order to evaluate the electrochemical performance, graphene is used as an EDLC electrode with flake sizes of 3, 12, and 60 nm. The surface characteristic and electrochemical properties of graphene were investigated using SEM, BET, and cyclic voltammetry. The specific capacitance of the graphene based EDLC was measured in a 1 M $TEABF_4/ACN$ electrolyte at the scan rates of 2, 10, and 50 mV/s. The 3 nm graphene electrode had the highest specific capacitance (68.9 F/g) compared to other samples. This result was attributed to graphene's large surface area and meso-pore volume. Therefore, large surface area and meso-pore volume effectively enhances the specific capacitance of EDLCs.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.145-145
• /
• 2000

Large area YBCO - films are series produced by thermal co-evaporation using a deposition scheme known as Garching process, which allows intermittent oxygen supply in a high vacuum ambient by an oxygen cup spaced closely underneath the moving substrates. The deposition area of 9" diameter is capable to handle very large wafers up to 8" diam. or numerous smaller wafers. The large distance between substrates and boat sources and an elaborate heater design guarantee excellent film uniformity over the entire deposition area. YBCO - films deposited by this technique are commercially fabricated for a variety of applications - the most prominent are resistive fault current limiters and microwave filters for mobile or satellite communications. IMUX and OMUX - filters are currently space qualined by Robert Bosch GmbH and are expected to be launched and installed on an experimental platform of the international space station ALPHA in 2001. Both of the above applications require quite different film specifications on the one hand, but at the same time extremely high uniformity and reproducibility on the other hand, since hundreds of YBCO - films are combined to large systems or have to be approved for manned space missions. The success of such projects is direct evidence that the technique of thermal evaporation is readily capable to meet these high demands and has become the major deposition technique to support the emerging HTS market.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.