• Korean Journal of Applied Biomechanics
• /
• 제15권2호
• /
• pp.197-207
• /
• 2005

The purpose of this study was to investigate the body segment kinematics by lap time during men's 5,000m racing. The subjects in this study were 4 male athletics who take part in the competition. The two dimension motion analysis with DLT(direct linear transformation) method was executed using digital video cameras. The following conclusion was that : It was shown that top ranking in a competition is continuous race pattern and the last Lap time is the most fast. It was shown that top ranking in a competition is continuos the stride length and it was the largest in the last Lap time. It was shown that according to the passing Lap time trunk frontal angle was decreasing and shoulder angle was continuous.

• Journal of the Korea Convergence Society
• /
• 제10권2호
• /
• pp.301-307
• /
• 2019

The purpose of this study is to evaluate the lap time of K-1 sprint competition and compare the records of the best group and the other groups. Based on these data we are willing to provide them on pace control strategies for improving their performances. The analysis was conducted on 12 elite kayak players, measuring the lap time by every interval after dividing the entire 1,000-meter race into 10 sections of 100 meters. We divide the group A, B, C and D based on their final time records. Two-factor repeated measures ANOVA, One-way ANOVA, and correlation analysis were performed. There were no significant lap time differences in the section of first 200m and last 200m between A, B and C. But the C's lap time of 200m~600m were significantly later than group A and B. Non-superior athletes need to establish strategies to reduce lap time in the middle section.

• Journal of Digital Convergence
• /
• 제17권8호
• /
• pp.465-470
• /
• 2019

This study was conducted to analyze the lap time of the K-1 1000m final race of men's general division and to develop strategies to adjust the pace for the intervals to improve the performance. We measured the lap time of the final race of the 99 th National Sports Festival by 250m intervals and compared them with the data of the World Championship finals held in 2018. The final average record of domestic top-ranked players was 248.651 seconds, and the top international's 210.826 seconds. There was a time gap of 38 seconds in the record. In lap-time, it was 8, 11, 6, and 13 seconds behind every 250m. World Championship players used the Fast-Maintain-Maintain-Spurt strategy while domestic players used the pacing strategy of Fast-Slow-Fast-Slow. In order to improve the performance of domestic players, it is necessary to adjust overall pace control strategies to maintain the pace after the quick start and to spurt at the last lap.

• Korean Journal of Applied Biomechanics
• /
• 제26권3호
• /
• pp.315-321
• /
• 2016

Objective: The aim of this study was to analyze effects of the toe-spring angle of bobsleigh shoes on start speed lap time to develop Korean-specific bobsled shoes suitable for winter environments and for domestic players on the basis of sports science and optimized biomechanical performance. Method: Seven Korean bobsleigh athletes participated in this study, with three pairs of sprint spikes from three companies (Type A, Type B, Type C). To analyze sprint lap time and forefoot bending angle for each shoe, participants were instructed to drag a sled 15 meters from the start line at a maximum sprint. forefoot bending angle was collected by a high speed camera, and lap time speed was measured. Results: Lap time for type B shoes was $3.52{\pm}0.17sec$, type A was $3.55{\pm}0.19sec$, and type C was $3.56{\pm}0.18sec$. Forefoot bending angles were: angle 1, $6.88{\pm}5.55^{\circ}$; angle 2, $9.23{\pm}6.38^{\circ}$; angle 3, $15.56{\pm}5.39^{\circ}$; angle 4, $9.54{\pm}3.85^{\circ}$; angle 5, $9.22{\pm}5.08^{\circ}$; angle 6, $7.66{\pm}6.44^{\circ}$; and angle 7, $4.30{\pm}6.24^{\circ}$ (p<.001). Forefoot bending in angle 3 was as follows: type A, $16.47{\pm}6.01^{\circ}$; type B, $14.30{\pm}4.96^{\circ}$; and type C, $15.90{\pm}5.17^{\circ}$. Conclusion: Hard outsoles and midsoles are better than soft type for reduced start lap time when developing a prototype Korean bobsled shoe.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제33권11호
• /
• pp.1256-1261
• /
• 2009

Today, implementation of the defect detection in laser welding has been researched for a long time, but most studies have been made around thin plate within $1{\sim}3mm^t$. Therefore, this study was measured and analyzed light emission signals of the induced plasma in $CO_2$ laser lap welding of $6mm^t$ Zn primer-coated steel, and based on this analysis, research made an investigation into possibility of monitoring in thick plate welding. It was been analyzing the measured signals by RMS and FFT processing, as a results, we were able to confirm definite difference of two signals between humping bead and sound bead. Thus, possibility of real time monitoring in $CO_2$ laser lap welding verified experimentally.

• Journal of the Korea Convergence Society
• /
• 제10권8호
• /
• pp.277-282
• /
• 2019

This study was conducted to compare the lap time of high school boys' K-2 1000m final at the $99^{th}$ National Sports Festival with the lap time of the World Championship final held in 2018 and to find an optimal pacing strategy to enhance the performance. The high school boys' average final record was 242.89 seconds, and the top international's 199.58 seconds. There was 43 seconds difference in records and by lap-time it were 9, 12, 9, and 13 seconds behind every 250m. World Championship players used the Super Fast-Even Pacing-Even Pacing-Spurt strategy. The $1^{st}$ to $3^{rd}$ ranked high school boys used Slow-Fast-Super Slow-Super Fast strategy, and $4^{th}$ to $9^{th}$ ranked boys used Fast-Slow-Fast-Slow strategy. The high school boys need to modify their pacing strategies to achieve world-class performance.

• The Transactions of the Korea Information Processing Society
• /
• 제4권11호
• /
• pp.2786-2800
• /
• 1997

In this paper, we investigate how well the channel memory (statistical dependence in the occurrence of transmission errors) can be used in the evaluation of widely used error control schemes. For this we assume a special case named as the simplest Markovian block-error pattern with two states, in which each block is classified into two classes of whether the block transmission is in error or not. We apply the derived pattern to the performance evaluation of the practical link-level procedures, LAPB/D/M with multi-reject options, and investigate both throughput and user-perceived response time behaviors on the discrete-time domain to determine how much the performance of error recovery action is improved under burst error condition. Through numerical examples, we show that the simplest Markovian block-error pattern tends to be superior in throughput and delay characteristics to the random error case. Also, instead of mean alone, we propose a new measure of the response time specified as mean plus two standard deviations 50 as to consider user-perceived worst cases, and show that it results in much greater sensitivity to parameter variations than does mean alone.

• Journal of Ocean Engineering and Technology
• /
• 제24권1호
• /
• pp.172-177
• /
• 2010

This study presents an explicit dynamic analysis of an adhesively bonded single-lap joint under an impact load. The finite element software, ANSYS LS-DYNA, was used for the analysis and Von Mises stresses were obtained from the analysis. To model the adherents, solid elements were used and a rigid body was assumed for impactor modeling. Three impact heights (1 m, 5 m, and 10 m) were applied to consider different impact conditions and infinite boundary conditions were applied to the end-area of each adherent to save computational time in the analysis. In addition to investigating the stresses in the normal state, we also investigated the stresses in a damaged state (elasticity deterioration), simulated by a change in Young's modulus for 36 of the 3600 elements in the upper layer of the adhesive. The results showed that the location of damage is critical to the stress state of each layer (upper, middle, and lower).

• Composites Research
• /
• 제34권5호
• /
• pp.317-322
• /
• 2021

When a complex load such as torsion, low-speed impact, or fatigue load is applied, the properties in the thickness direction are weakened through microcracks inside the material due to the nature of the laminated composite material, and delamination occurs. To prevent the interlaminar delamination, various three-dimensional reinforcement methods such as Z-pinning and stitching, and structural health monitoring techniques that detect the microcrack of structures in real time have been continuously studied. In this paper, the single-lap joints with I-fiber stitching process were manufactured by a co-curing method and their strengths and failure detection capability were evaluated. AE and electric resistance method were used for detection of crack and failure signal and electric circuit for signal analysis was manufactured, and failure signal was analyzed during the tensile test of a single-lap joint. From the experiment, the strength of the single lap joint reinforced by I-fiber stitching process was improved by about 44.6% compared to the co-cured single lap joint without reinforcement. In addition, as the single-lap joint reinforced by I-fiber stitching process can detect failure in both the electrical resistance method and the AE method, it has been proven to be an effective structure for failure monitoring as well as strength improvement.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권8호
• /
• pp.3223-3227
• /
• 2015

Objective: We evaluated the association of body mass index (BMI) with perioperative outcomes in patients who underwent laparoscopic or open radical nephroureterectomy. Materials and Methods: This retrospective single-center study included 113 patients who had been diagnosed with upper urinary tract cancer from January 1998 to June 2013 and were treated with laparoscopic nephroureterectomy (Lap group, n=60) or open nephroureterectomy (Open group, n=53). Laparoscopic nephroureterectomy was performed via a retroperitoneal approach following an open partial cystectomy. The two surgical groups were stratified into a normal-BMI group (<25) and a high-BMI group ($BMI{\geq}25$). The high-BMI group included 27 patients: 13 in the Lap group and 14 in the Open group. Results: Estimated blood loss (EBL) in the Lap group was much lower than that in the Open group irrespective of BMI (p<0.01). Operative time was significantly prolonged in normal-BMI patients in the Lap group compared to those in the Open group (p=0.03), but there was no difference in operative time between the Open and Lap groups among the high-BMI patients. Multivariate logistic regression analysis of the data for all the cohorts revealed that the open procedure was a significant risk factor for high EBL (p<0.0001, hazard ratio 8.02). Normal BMI was an independent predictor for low EBL (p=0.01, hazard ratio 0.25). There was no significant risk factor for operative time in multivariate analysis. There were no differences in blood transfusion rates or adverse event rates between the two surgical groups. Conclusions: Laparoscopic radical nephroureterectomy via a retroperitoneal approach can be safely performed with significantly reduced EBL even in obese patients with upper urinary tract cancer.