• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.183-185
• /
• 2005

In an attempt to optimize friction spot joining process of Mg alloys, effects of joining parameters such as rotating speed, plunging depth, and dwelling time on the joints properties were evaluated. Experimental tests were carried out for lap joined AZ31B-H24 sheets. A wide range of joining conditions could be applied to join Mg alloys without defects in the weld zone except for certain welding conditions with an insufficient heat input. The microstructures and hardness variations in the weld regions are discussed. For sound joints without defects, tensile shear strength of weld joints was higher approximately 116% than typical tensile shear strength of electrical resistance spot-welded joints for magnesium(Welding handbook, Vol 3, AWS).

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.26-28
• /
• 2007

This research is concerned with a study of failure strength evaluation on heat element gap at resistance welding. The failure strength of resistance welded joint is changed by welding factor like as current(power level), welding time(total energy), pressure etc. and another heat element factor like as number of element line, element gap etc. Tensile-shear tests were carried out with the single-lap specimen using polypropylene(PP). The failure mechanism and optimization of gap was discussed in order to explain the tensile-shear strength evaluation on heat element gap at resistance welding. Orthogonal array was used by fractional factorial design for efficient experiments.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.46-51
• /
• 2007

The near-optimal control algorithm for central cooling system has been developed for minimizing energy consumption while maintaining the comfort of indoor thermal environment in terms of the environmental variables such as time varying indoor cooling load and outdoor temperatures. The optimal set-points of control parameters with near-optimal control are supply air temperature and chilled water temperature. This study has been done by using LapVIEW program with PID control in order to analyze the central cooling system energy saving.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.153-157
• /
• 2003

In the present work, the effect of plasma treatment of aluminum on the fracture toughness of CFRP/aluminum composites was investigated. The surface of the aluminum was treated by a DC plasma. The plasma treatment was carried out at volume ratio of acetylene gas to nitrogen gas of 5:5 and the treatment time used was 30 sec. Cracked lap shear specimens of aluminum/CFRP composites were made using secondary bonding procedure. Fracture toughness of aluminum/CFRP composites was determined using the work factor approach. Then, the fracture toughness of plasma-treated aluminum/CFRP composites was compared with that of untreated aluminum/CFRP composites. The results showed that the fracture toughness of plasma-treated aluminum/CFRP composites was about 50 % higher than that of untreated aluminum/CFRP composites.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.295-297
• /
• 2013

Reinforcing bar coupling method has a variety of ways including lap-splice method. However, there are problems that need to be improved in terms of constructability, economics analysis. We should be improved about the problems of the existing methods. Accordingly, this study were developed a new type of staggered grip type reinforcing bar coupling. The proposed method show the following effects than existing methods. First, this method can be reduce time through improved workability. Second, increasing safety through the slip removal. Third, improving economic efficiency by reduce the manufacturing costs.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 추계학술발표대회
• /
• pp.515-516
• /
• 2009

강원도는 2018 년 동계올림픽 유치 및 USN 산업 활성화를 목표로 도내에서 u-스포츠 사업을 활발하게 진행 중에 있다. 이 사업의 일환으로 2008 년 CDMA 망을 기반으로 한 무선 구간기록 측정 시스템이 용평 스키장에 이미 설치된 바 있다. 이 연구에서는 기 설치된 CDMA 망 기반 무선 구간 기록 측정 시스템을 USN 기반으로 전환시켜 구현하고 평가한다. 평가 결과 구간 기록의 측정 오차가 2.6ms에서 700us로 현저하게 개선되었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 춘계학술발표대회
• /
• pp.921-922
• /
• 2008

본 논문에서는 2018 평창 동계올림픽 개최를 위해서 지능형 스키 경기장의 시범 사업 중의 하나로 구축된 CDMA 망 기반 구간 기록 측정 시스템을 소개한다. 구간 기록 측정 시스템은 슬로프구간별로 설치된 동작 감지 센서로부터 활강 중인 선수의 구간 시간을 측정하고, 측정한 구간 시간정보를 CDMA 망을 통해 중앙관제센터에 전송함으로써 기존의 수동측정 방식보다 더 정확하게 구간별, 위치별 기록 측정 정보를 제공할 수 있다.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.375-383
• /
• 2007

Treatment efficiency research was performed using Fenton process and the electrochemical process in the presence of ferrous ion and hydrogen peroxide for the industrial wastewater including 1,4-Dioxane produced during polymerization of polyester. The Fenton process and the electrochemical Iron Redox Reaction (IRR) process were applied for this research to use hydroxyl radical as the powerful oxidant which is continuously produced during the redox reaction with iron ion and hydrogen peroxide. The results of $COD_{Cr}$ and the concentration of 1,4-Dioxane were compared with time interval during the both processes. The rapid removal efficiency was obtained for Fenton process whereas the slow removal efficiency was occurred for the electrochemical IRR process. The removal efficiency of $COD_{Cr}$ for 310 minutes was 84% in the electrochemical IRR process with 1,000 mg/L of iron ion concentration, whereas it was 91% with 2,000 mg/L of iron ion concentration. The lap time to remove all of 1,4-Dioxane, 330 mg/L in the wastewater took 150 minutes with 1,000 mg/L of iron ion concentration, however it took 120 minutes with 2,000 mg/L of iron ion concentration in the electrochemical IRR process.

• 한국컴퓨터정보학회논문지
• /
• 제19권4호
• /
• pp.91-99
• /
• 2014

본 논문은 2차 할당 문제의 최적 해를 찾을 수 있는 휴리스틱 다항시간 알고리즘을 제안하였다. 일반적으로 선형 할당 문제의 최적 해는 헝가리안 알고리즘으로 구한다. 그러나 2차 할당문제의 최적 해를 찾는 알고리즘은 제안되지 않고 있다. 제안된 알고리즘은 거리행렬의 단위거리로부터 그리드 형태의 배치를 찾아내고, 이 형태에 맞도록 흐름량 행렬의 최대 값부터 내림차순으로 최대흐름을 최소 거리에 배치하는 최대흐름/최소거리 기법을 적용하였다. 제안된 알고리즘을 다양한 그리드형 2차 할당문제에 적용한 결과 2차 할당문제의 해를 다항시간에 구할 수 있는 알고리즘이 존재할 가능성을 보였다.

• 한국운동역학회지
• /
• 제28권3호
• /
• pp.151-158
• /
• 2018

Objective: In this study, we analyzed kinematic changes in the start phase of speed skating before and after physical training. Method: We introduced a new strength training program (2017) that was improved in terms of exercise type and intensity [%, one repetition maximum (1RM)] compared with the previous strength training program (2016). The new program was applied to elite speed skating athletes (four males and four females). To determine the improvement in starting technique, we recorded race images during the start phase of the 500-m race held in 2016 and 2017. The race images were collected using five high-speed cameras and kinematic characteristics of the start phase were analyzed by three-dimensional image analysis. Results: The 1RMs were improved by 11% on an average after the strength training. In 2017, records of four out of the eight athletes were shortened in terms of the initial lap time (100 m), and 500-m records were shortened in six athletes. The time to nine strokes was shortened in five athletes, and the ratio of correct kinetic chain was increased or maintained at a high level in six athletes. Conclusion: In this study, the new strength training program (2017), applied to elite speed skating athletes, showed a positive effect on starting technique and reduced the record times.