• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.567-571
• /
• 1997

Recently, automobile industry has led to increasing use of aluminum alloy for weight reduction. Automobile made of aluminum alloy can be given lighter, stronger and a harder surface by anodizing than one made of steel-alloy. In this paper, we investigate the influence of lap length, adherend thickness and adhesive thickness on adhesive strength of single-lap adhesive joints by conducting tensile-shear tests. Single-lap adhesive joints of aluminum was calculated using joint factor by using adhesive length, adherend thickness of specimen.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.85-92
• /
• 1994

With the wide application of fiber-reinforced composite meterial in aircraft space structures and robot arms, the design and manufacture of composite joints have become a very important research area because they are often the weakest areas in composite structure. In this paper, the torque transmission capacities of the adhesive tubular single lap joint and double lap joint were studied. The stress and torque transmission capacity of the adhesive joints were analyzed by the finite element method and compared to the experimental results. The torque capacity of the double lap joint was increased 2.7 times over that of the single lap joint. Also, the fatigue limit of the double lap joint was increased 16 times over that of the single lap joint.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.570-576
• /
• 2018

철근콘크리트 구조물에서 철근의 이음은 철근을 겹쳐서 결속선으로 결속한 겹침이음과 커플러에 의한 기계적 이음이 일반적이다. 국내 설계기준(콘크리트구조기준)에서는 일반철근(비용접 철근)에 대해 용접 겹침이음을 제한하고 있으나, 해외기준(AWS D1.4)에서는 예열을 통한 일반철근의 용접 겹침이음을 허용하고 있다. 본 연구에서는 국내외 규격 및 설계기준을 조사하고, 건설현장에서 가장 많이 사용되는 SD400 강종의 일반철근을 대상으로 용접 겹침이음 인장실험을 수행하여 인장강도를 평가하였다. 용접 겹침이음 시험체의 용접길이는 KS규격(KS B ISO 17660-1)에 제시된 최소용접길이인 8d를 적용하고, 예열온도는 AWS D1.4에 따라 D19이하는 $150^{\circ}C$, D22이상은 $260^{\circ}C$로 설정하였다. 인장실험 결과, 용접 겹침이음된 일반철근은 콘크리트구조기준에서 요구하는 인장강도(항복강도의 125%)를 발현하였으며, 모두 철근 모재에서 파단이 발생되었다. 예열 유무에 따른 영향을 검토하기 위해, 일반철근을 예열한 후 용접한 것과 예열 등의 열처리하지 않은 것을 비교한 결과, 인장강도는 큰 차이를 보이지 않았다. 실험시 사용한 일반철근을 대상으로 화학성분을 분석하여 탄소당량(Ceq)을 확인한 결과, 0.45% 이하로 낮았다. AWS D1.4에 따르면, 탄소당량이 0.45% 이하면 예열이 필요하지 않은 조건이다. 결과적으로 예열의 영향이 미비한 것은 일반철근의 탄소당량이 낮았기 때문인 것으로 확인되었다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.62-67
• /
• 2012

In this study, the bonding strengths of adhesively bonded joints are experimentally investigated. A series of lap-shear tests are conducted using single lap type adhesive joints. In order to analyse the joint fabrication factors that affected the bonding strength, the parametric tests are conducted with various thickness of adhesive, surface roughness and fillet of adhesive. In addition, for the comparative study with the welded joint, lap-shear tests using specimens with 2 welded sides and 4 welded sides are also carried out. The quantitative results of the strength analysis are summarized, and some proposals are made on setting up testing standards for adhesively bonded joints.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2022-2031
• /
• 2000

Since the surface roughness of adherends affects much the strength of adhesivelybonded joints, the effect of surface roughness on the fatigue life of adhesively bonded tubular single lap joints was investigated analytically and experimentally by fatigue torsion test. The stiffness of the interfacial layer between adherends and adhesive was modeled as a normal statistical distribution function of surface roughness of adherends. From the investigation, it was found that the optimum surface roughness of adherends for the fatigue strength of tubular single lap joints was dependent on bondthickness and applied load.

• Structural Engineering and Mechanics
• /
• 제14권6호
• /
• pp.649-660
• /
• 2002

Experimental results are presented from tests conducted on reinforced concrete beam-column joints with lap splices under reversed cyclic loading simulating earthquake action. Response curves are compared for twenty-four specimens designed according to Eurocode 2. The main parameters of the investigation are, the geometry of the reinforcing bar extension, the applied axial load (normalized), the available cover over lap splice region extended as length required from Eurocode 2, as well as the shape and the volumetric percentage of the stirrups confining the lap splice zone. The results are evaluated with regards to the load intensity, the energy absorption capacity and the characteristics of the load deflection curve.

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.439-447
• /
• 1999

복합재료-금속 접착접합부가 사용 중 반복하중을 받을 때 발생하는 피로손상을 실시간에 평가할 수 있는 기법으로 음향초음파(acousto-ultrasonics; AU)법을 채택하였으며, 피로시험 중의 단일겹치기(single-lap) 및 이중겹치기 (double-lap) 평판형 시험편에서 취득한 신호로부터 계산된 음향초음파변수(acousto-ultrasonic parameters: AUP)와 피로손상도 사이의 상관관계를 나타내는 곡선을 얻을 수 있었다. 곡선은 피로손상에 의한 고분자기지 복합재료의 강성율 저하($E/E_o$)를 나타내는 곡선과 매우 유사하며, 이를 바탕으로 피로손상도의 실시간 예측이 가능하다. 다만 단일겹치기 시험편의 경우에는 Amplitude와 AUP2를, 이중겹치기 시험편의 경우에는 Amplitude와 AUP1을 기준 변수로 채택할 때 보다 일관성 있는 결과를 얻고 있는 점으로부터 실제 구조물에 적용함에 있어서는 각각의 형상에 따른 최적변수를 선택하여 활용해야 할 것으로 사료된다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.42-49
• /
• 2005

In general, multi-lap spot weld joints are frequently present in automobile. Most research, however, has been focused on the single-lap spot weld joints until now. In this paper, tensile-shear strength tests are performed to examine the weldability of 3-lap spot joint welded by using the high strength steel sheet and the zinc coated steel sheet. The indentation depth and nugget diameter are used to propose the optimum welding conditions. The weldability is affected by the welding current and welding time for 3-lap spot joint. Meanwhile the expulsions is round to decrease with the increase of electrode force. The optimum welding conditions are presented for 3-lap spot joints of high strength steel sheet and zinc coated steel sheet.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.101-107
• /
• 2003

Since stainless steel sheets have good mechanical properties, weldability, appearance and corrosion resistance, they are commonly used as one of the structural materials of the railroad cars or the commercial vehicles which are manufactured by the spat welding. Among the many kinds of spot welded lap joints, it can be found that multi-lap joints are employed in their body structure. But, fatigue strength of these joints is lower than that of base metal due to high stress concentration at the nugget edge of spot weld and is considerably influenced by welding conditions as well as the mechanical and geometrical factors. Thus, it is necessary to establish a reasonable and systematic design criterion for the long life design of the spot-welded body structures. In this paper, the stress distribution and deformation around the spot-welded multi-lap joints subjected to tensile shear load was numerically analyzed. Also, the $\Delta$P-Nf curve was obtained by fatigue tests. Using these results, $\Delta$P-Nf curves were rearranged in to the ${\Delta}{\sigma}$-Nf relation with the maximum stress at nugget edge of spot weld.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.58-68
• /
• 1998

Advantages of adhesively bonded joints and techniques of weight reduction have led to increasing use of structural adhesives such as LSI(large scale integration) package, automobile, aircraft in the various industries. In spite of such wide applications of adhesively bonded joints, the evaluation method of bonding strength has not been established. Stress singularity occurs at the interface edges of adhesively bonded joints and it is required to analyze it. In this paper, the stress singularity using 2-dimensional elastic boundary element method (BEM) with the changes of the lap length and adhesive for single lap joint was analyzed, and experiments of strength evaluation were carried out. As the results, the evaluating method of bonding strength considering stress singularity at interface edges of adhesively bonded joints and stress intensity factor of interface crack have been proposed in static and fatigue test.