• Macromolecular Research
• /
• v.11 no.6
• /
• pp.476-480
• /
• 2003

The rate of hydrolysis of Langmuir monolayer films of biodegradable polylactide (PLA) derivates was investigated at the air/water interface. The present study investigated such parameters as surface pressure, pH, and time. The hydrolysis of polyester monolayers depended strongly on the subphase pH, the concentration of active ions. Under the conditions studied here, polymer monolayers showed faster rates of hydrolysis when they were exposed to a basic subphase rather than they did when exposed to acidic or neutral subphases. By increasing the concentration of the degradation medium, the hydrolytic rate of dl-PLA monolayers was accelerated (accelerating effect). In addition, the basic hydrolysis of modified PLA with small amounts of hydrophilic (benzyloxycarbonyl) methyl morpholine-2,5-dione or glycolide was much faster than that of the PLA homopolymer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.459-462
• /
• 2001

We have investgated the photoisomerization using light irradiation 8A5H LB film accumulated by monolayer and three layers on an ITO. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in 0.1mol/L NaClO$_4$ solution. The scan rate was 100mv/s.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.193-198
• /
• 1999

Maxwell displacement current(MDC) measuring technique has been applied on the study of monolayers of fatty acid. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about $130{\AA}^2$. MDCs were investigated in connection with monolayer compression cycles. It was found that the current pulses were generated over the entire range of molecular area, and the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. We investigated the change in absorption spectra of the fatty acid(8A5H) monolayer LB film due to cis-trans photoisomerization. It was found that the absorption spectrum of the 8A5H LB film was induce to photoisomerization by alternate irradiation with UV and visible light irradiation.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.2
• /
• pp.93-97
• /
• 1994

A Stability to spreading solvent, which is acetonitrile, dichloromethane, benzene, chloroform, and acetonitrile-benzene (1:1, v/v) of (N-docosyl quinolinium)-TCNQ(1:2) complex was investigated by UV-visible spectrometer and was confirmed stabilized on acetonitrile, dichloromethane, and acetonitrile-benzene(1:1, v/v) for 7 hours. Using buffer solution($ph{\doteqdot}6.0$) as subphase for Langmuir-Blodgett(LB) film, it was achieved successively to fabricate the Y type LB films of (N-docosyl quinolinium)-TCNQ(1:2) complex. For the identification of deposition of (N-docosyl quinolinium)-TCNQ(1:2) complex, UV-visible spectra was recorded on HP 8452A spectrometer.

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.303-310
• /
• 1988

본 논문에서는 Langmuir-Blodgett법으로 유기초박막을 제작하기 위하여 시료인 (N-docosyl pyridinium)-TCNQ(1:2) 작제를 합성하고 이를 초박막으로 제작한 다음, U.V측정, capacitance측정, 그리고 기판과 수직한 방향의 도전율등을 측정하여 막이 잘 이루어지고 있음을 확인하였다. 한편, 하부 전극을 Al로 할 경우 전극표면에 생기는 자연 산화막(Al$_{2}$O$_{3}$)의 두께는 37.1.angs.정도이었으며 기관과 수직한 방향의 도전율은 약 $10^{-14}$S/cm로 양호한 절연성이었다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.9
• /
• pp.913-919
• /
• 1991

For an elementary study of the molecular electronic devices, in this study, N-alkylpyridinium(TCNQ) (1:1) and (1:2) complexed were synthesized. These complexes were verified by the UV, IR and the elemental analysis. Deposition of the LB films were verified by the reciprocal capacitance, UV absorbance and decresement area of Langmuir fims as functions of number of layers. The internal voltage of LB membrane devices fabricated with Y-type resides in 100-300mV. Finally, it seemed that self-polarization of LB membrance generates internal voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.97-100
• /
• 1994

The present paper is devoted to the physical and electrical characteristics of N-docosyl- quinolinium-TCNQ films compared with the films doped with I$_2$. Iodine affects the degree of charge transfer and the conductivity of the films. The UV-visible absorption spectra of the film doped with I$_2$ shows that the peak of I$_3$ which had electronic transition at 300∼350nm and (TCNQ-)$_2$ dimer absorption disappered. The in-plane electrical conductivity of the films doped with I$_2$ were 1.4${\times}$10$\sub$-6/S/cm, which is two orders of magnitude higher conductivity than undoped LB films. The film structural difference between Y and Z-type may cause the conductivity. Another possible reasons of the structural difference was the overlapping TCNQ anion radical in LB films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.347-349
• /
• 1999

We have fabricated insulating thin films using p-hexadecoxyphenol(p-Hp) that was formed phenol-formaldehyde resin of crosslinked structure from reaction with formaldehyde by LB technique. For fabricated MIM device, the possibility for insulating layers of electronic were investigated by electrical properties of their LB films according to crosslinking of LB films current-voltage (I-V) properties and frequency-capacitance (C-F) characteristics. We have provided evidence for the high insulating performance of phenol-formaldehyde thin films by the LB method. Conductivity of their LB films was as follows: pure water > 1 % aq. Formaldehyde > heat treatment, in the current-voltage (I-V) characteristics. It is demonstrated that insulation properties of crosslinked p-HP LB films were improved. In capacitance-frequency properties, the heat-treated p-HP LB films for crosslinking showed a low relative dielectric constant.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.80-85
• /
• 1999

In this paper, $NO_2$ gas detection characteristics of Octa-dodecyloxy copper-phthalocyanine films prepared by LB method was investigated measuring the electrical conductance of these films. The electivity characteristics of these LB films exposed to $NO_2, NO, and SO_2$ gas was also investigated. Conductivity activation energy of these films as a function of temperature was obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.150-153
• /
• 1997

Langmuir-Blodgett(LB) technique is one of the ways of fabricating organic ultra-thin films. It is well known that It has the advantage to control the alignment and orientation of the molecules in the films. Metallo-phthalocyanines(MPcs) are sensitive to electron affinitive toxic gaseous molecules, such as NO$_2$, NO, SO$_2$. MPcs are thermal, optical, mechanical, chemical stable. Therefore, it is interesting to prepare phthalocyanine LB films containing copper as a chemical sensor for NO$_2$ and SO$_2$ gas and test their sensitivity to these toxic gases. In this study, thin films of Octa-dodecylosy copper-phthalocyanine were prepared by LB technique. $\pi$-A isotherm, transfer ratio, UV-VIS. spectroscopy of these films were investigated. Also current-voltage(I-V) characteristics of these was auto investigated.