• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.796-798
• /
• 1988

Langmuir-Blodgett(LB) films of arachic acid and TCNQ(tetracyanoquinodimethane) were prepared in the sample of Al/LB film/Al type where Al are electrodes, and polarization in LB film and dipolar moment of molecules in the films were measured by themally stimulated current(TSC). It is ascertaind in our experiments that dipolar mament of $C_{12}$TCNQ molecule was about 13-15 debye and the moment was directed from the alkyle chain toward TCNQ. Generation of the open circuit voltage was investigated on the z-type and Hetero structure of LB films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1525-1527
• /
• 1997

We deposited maleate copolymer films by using Langmuir-Blodgrtt(LB) method. The deposition status of LB films were verified by the measurement of capacitance which was increased with the number of layers. And, we have investigated anisotropy electrical conduction characteristics of maleate copolymer LB films by I-V measurement for perpendicular direction and horizontal direction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.511-514
• /
• 2000

Photoreactive multilayer films were prepared using long-chin alkyl diesters of p-phenylenediacrylic acid(p-PDA). In spite of the absence of hydrophilic groups in these molecules, they formed stable monolayers on the water surface when mixed with arachidic acid. Surface showed the presence of a condecsed phase and these monolayer could be transferred onto a substrate with Y-type deposition. The UV spectra of mixed multilayer films showed of absorption peak compared with that in solution. The linear relationship between absorbanoe and the number of layers supports the successful formation of multilayer films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.99-102
• /
• 1994

The use of preformed polymers and their cross-linking have been a attempted in order to improve the intrinsic fraqility of monolayers and Langmuir-Blodgett (LB)films and to make their technological applications possible. It has shown that an imidization followed a polyion-complexation can stabilize the LB films against heat and solvents. And when the polymer structure was properly designed concurrent removal of the alkyl tails together with imide formation could be accomplished. In this paper we present a characteristic monolayer behavior of polymer with pendent polythers and carboxyls it’s polyion-complexed LB film with subphase polymer PAA and a possible skeletonization of the LB film by thermal imidization. Also deposition status of LB films are evaluated by using QCM

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.1-4
• /
• 1997

In this study, ruin films of Octla-dodecyloxy copper-phthalocyanine were prepared by Langmuir-Blodgett (LB) method and characterirzed by using UV-Vis absorption spectroscopy and ellipsometry. [1],r[2] Optimal transfer condition of LB films was investigated and preliminary results of current-voltage(1-V) characteristics of these films exposed to NO$_2$ gas as were discussed functions of film thickness, temperature and NO$_2$ gas concentration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.298-301
• /
• 1997

This paper describes the thermally stimulated current(TSC) measurements arachidic acid(AA) and polyamic acid alkylamine salts(PAAS) LB film, which is a precursor of polyimide(PI). The measurements were performed from room temperature to about 250$^{\circ}C$ and the temperature was increased at a rate of 0.02 $^{\circ}C$/s linearly[4]. It shows that peaks of TSC are observed at about 80$^{\circ}C$ in the arachidic acid and about 80$^{\circ}C$, 160$^{\circ}C$ in the PAAS LB films. The DSC and TGA of PAAS, arachidic acid are measure. Monolayer phases on the water subphase such as Langmuir(L) films and the phase transitions from gas phase to solid phase via liquid phase are observed using Brewster angle microscopy(BAM). BAM is also used to observe the Langemuir-Blodgett(LB) films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.222-224
• /
• 1994

This paper describes the optimum conditions for depositing PAAS(polyamic acid alkylamine salts) Langmuir-Blodgett (LB) films, which are a precursor of polyimide LB films. The optimum conditions were studied by $\pi$-A isotherma with a varication of temperatures, spreading amounts or solution, compression speeds, and etc. Transfer ratio was also measured depending on the type of LB films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have been attracted lots of interests in large-area light-emitting display. In this stuffy, an emissive layer was fabricated using Langmuir-Blodgett(LB) technique in organic light-emitting (OLEDs). This emissive organic material was synthesized and named PECCP[poly(3.6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] which has a strong electron donor group and an electron acceptor group in main chain repeated unit. This material has good solubility in common organic solvents such as chloroform. THF, etc, and has a good stability in air. The Langmuir-Blodgett(LB) technique has the advantage of precise control of the thickness down to the molecular scale, In particular, by varying the film thickness it is possible to investigate the metal/polymer interface. Optimum conditions for the LB film deposition are usually determined by investigating a relationship between a surface pressure $\pi$ and an effective are A occupied by one molecule on the subphase. The LB films were deposited on an indium-tin-oxide(ITO) glass at a surface pressure of 10 mN/m and dipping speed of 12 mm/min after spreading PECCP solution on distilled water surphase at room temperature, Cell structure was ITO/PECCP LB film/Alq$_3$/Al. We considered PECCP as a hole -transport layer inserted between the emissive layer and ITO. We also used Alq$_3$ as an emissive layer and an electron transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum and EL spectrum of the OLEDs.

• 접착 및 계면
• /
• 제11권4호
• /
• pp.144-148
• /
• 2010

본 연구에서는 플라즈몬 공명 신호 증폭을 위한 AuNPs의 실리카 표면 개질 및 나노 입자의 안정적인 표면 박막 형성을 목표로 하였다. 직경 10 nm의 AuNPs를 수용액 상에서 제조하였으며, AuNPs 표면에 실리카 층을 단계별로 형성시켰다. Tetraethlyorthosilicate 농도를 조절함으로써 실리카 박막 두께를 조절하였으며, 얻어진 나노 입자들을 수용액 표면에 분산시켜 Langmuir-Blodgett 박막을 제조하였다. 흡광스펙트럼의 변화를 관찰함으로써 AuNPs의 크기 변화를 확인하였으며, 원자 힘 현미경으로 LB 박막의 형성 여부와 표면 균일도를 살펴보았다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.287-291
• /
• 2002

We fabricated the crosslinked films using p-hexadecoxyphenol (p-HP), which is amphiphilic and can form polyion complexes with formaldehyde at the air-water interface. The behavior of polyion complexation at the air-water interface and the surface structure of LB films was investigated by Brewster angle microscope(BAM) and scanning Maxwell-stress microscope (SMM), respectively. Also, the electrical properties for crosslinking in phenol-formaldehyde LB films were investigated by measuring conductivity and dielectric constant. The conductivities of p-HP LB films are as follows: heat-treatment of 1% formaldehyde subphase(3.76$\times$10$^{-15}$ ~4.76$\times$10$^{-1}$5[S/cm])$\times$10$^{-14}$ ~1.74$\times$10$^{-14}$ [S/cm]). Also, relative dielectric constants of p-HP LB films were reduced from 6.76~7.84 (pure water) to 2.97~3.25 (heat-treatment of 1% formaldehyde subphase))