• Carbon letters
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2007

The use of low cost and ecofriendly adsorbent has been investigated as an alternative to the current expensive method of removing dyes from wastewater. Cow dung cakes were collected from the nearby village which was burnt in a muffle furnace at $500^{\circ}C$ to obtain the required ash. This paper deals with the removal of Reactive Blue 221, Acidoll Yellow 2GNL and Olive BGL which are mainly used in textile industry, from aqueous solution by cow dung ash without any pretreatment. The adsorption was achieved under different pH, adsorbate concentration and the applicability of Langmuir and Freundlich isotherms were examined.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.1
• /
• pp.41-53
• /
• 2006

In this study, estimation of nonlinear adsorption isotherms(Langmuir & Freundlich adsorption isotherm) and advection-dispersion model parameters was conducted using genetic algorithm(GA) for Zn and Cd adsorption. Estimated parameters of nonlinear adsorption isotherms, which were obtained from the optimization process using genetic algorithm(GA), are nearly same with the parameters obtained from a linearization process of the nonlinear isotherms. Estimated effective diffusion coefficients, which were obtained from a finite element analysis of the advection-dispersion model and an optimization procedure using the genetic algorithm, for the metals were approximately in the order of $10^{-7}cm^2/s$ which could be obtained based on the linear distribution coefficient. The effective diffusion coefficients based on the nonlinear retardation factors were in the range of $10^{-6}{\sim}10^{-5}cm^2/s$. As a result, the correlation coefficient obtained between the measured and calculated concentration was over 0.9 which means that the genetic algorithm should be successfully applied to estimate the unknown parameters of the nonlinear adsorption isotherms and advection-dispersion model.

• Carbon letters
• /
• v.10 no.2
• /
• pp.131-138
• /
• 2009

Study on the removal of Acid Green 20 by adsorption on indigenously prepared activated carbons from cow dung, mango stone, parthenium leaves and commercial activated carbon have been carried out with an aim to obtain information on treating effluents from tanneries. The effects of various experimental parameters have been investigated by following the batch adsorption technique. Adsorption data was modeled with the Freundlich and Langmuir isotherms. Removal of Acid Green 20 was found to be favorable using Biomass ash and could be considered as alternatives to commercial activated carbon for the treatment of tannery effluents, especially for the removal of dye(s).

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.205-209
• /
• 2014

Hematite iron oxide (${\alpha}$-$Fe_2O_3$) nanowalls were fabricated on aluminum substrate by a facile solvent-assisted hydrothermal oxidation process. The XRD and EDS patterns indicate that the sample has a rhombohedral phase of hematite $Fe_2O_3$. FE-SEM, TEM, HR-TEM, SA-ED were employed to characterize the resulting materials. $N_2$ adsorption-desorption isotherms was used to study a BET surface area. Their capability of catalytic degradation of titan yellow GR azo dye with air oxygen in aqueous solution over $Fe_2O_3$ catalysts was studied. The result indicates that the as-prepared product has a high catalytic activity, because it has a larger surface area. Langmuir and Freundlich isotherms of adsorption dye on the catalysts surface were investigated and the decomposition of titan yellow GR follows pseudo-first order kinetic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.592-599
• /
• 2018

The kinetics and thermodynamics of the adsorption of acid blue 40 from an aqueous solution by activated carbon were examined as a function of the activated carbon dose, pH, temperature, contact time, and initial concentration. The adsorption efficiency in a bathtub was increased at pH 3 and pH 11 due to the presence of sufonate ions ($SO_3{^-}$) and amine ions ($NH_2{^+}$). The equilibrium adsorption data were fitted to the Langmuir, Freundlich and Temkin isotherms. The results indicated that the Langmuir model provides the best correlation of the experimental data. The separation factor of the Langmuir and Freundlich model showed that the adsorption treatment of acid blue 40 by activated carbon could be an effective adsorption process. The adsorption energy determined by the Temkin equation showed that the adsorption step is a physical adsorption process. Kinetics analysis of the adsorption process of acid blue 40 on activated carbon showed that a pseudo second order kinetic model is more consistent than a pseudo second order kinetic model. The estimated activation energy was 42.308 kJ/mol. The enthalpy change (80.088 J/mol) indicated an endothermic process. The free energy change (-0.0553 ~ -5.5855 kJ/mol) showed that the spontaneity of the process increased with increasing adsorption temperature.

• Carbon letters
• /
• v.23
• /
• pp.30-37
• /
• 2017

Dyes are widely used in various industries including textile, cosmetic, paper, plastics, rubber, and coating, and their discharge into waterways causes serious environmental and health problems. Four different carbon nanostructures, graphene oxide, oxidized multi-walled carbon nanotubes, activated carbon and multi-walled carbon nanotubes, were used as adsorbents for the removal of Nile Blue A (NBA) dye from aqueous solution. The four carbon nanostructures were characterized by scanning electron microscope and X-ray diffractometer. The effects of various parameters were investigated. Kinetic adsorption data were analyzed using the first-order model and the pseudo-second-order model. The regression results showed that the adsorption kinetics were more accurately represented by the pseudo-second-order model. The equilibrium data for the aqueous solutions were fitted to Langmuir and Freundlich isotherms, and the equilibrium adsorption of NBA was best described by the Langmuir isotherm model. This is the first research on the removal of dye using four carbon nanostructures adsorbents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.344-349
• /
• 2001

The removal of chlorine from aqueous solutions on dried Chlorella vulgaris(DCV) and green tea powder(GTP) were investigated as a function of contact time, pH and initial chlorine concentration. Removal by DCV and GTP reached equilibrium after 3hrs and 0.5hr, respectively. Optimum removal pH values of DCV and GTP were determined as above 10. Both Langmuir and Freundlich adsorption models were suitable for describing the short-term removal of chlorine by DCV and GTP. According to Langmuir adsorption isotherms the maximum removal capacity of DCV (2.75mg $Cl_2/mg$) was nearly two times greater than those of GTP (1.53mg $Cl_2/mg$) and activated carbon (1.47mg $Cl_2/mg$). These results suggested that Chlorella vulgaris biomass might potentially be used as an alternative to traditional water treatment materials for removal of residual chlorine in drinking water or process waste-water.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.941-946
• /
• 2009

Two types of synthetic zeolites, commercially used (Z-WK) and synthesized by coal fly ash (Z-C1), and raw coal fly ash(F-C1) were examined for its kinetics and adsorption capacities of cobalt. Experimental data are fitted with kinetic models, Lagergen $1^{st}$ and $2^{nd}$ order models, and four types of adsorption isotherm models, Langmuir, Freundlich, Redlich-Peterson, and Koble-Corrigan. Synthesized zeolite (Z-C1) which had 1.51 of Si/Al ratio was synthesized by raw coal fly ash from a thermal power plant. Adsorption capacities with three types of adsorbents, Z-WK, Z-C1, and F-C1, were in the order of Z-C1 (94.15 mg/g) > F-C1 (92.94 mg/g) > Z-WK (88.56mg/g). The adsorption kinetics of Z-WK and Z-C1 with cobalt could be accurately described by a pseudo-second-order rate equation. The adsorption isotherms of Z-WK and Z-C1 with cobalt were well fitted by the Langmuir and Redlich-Peterson equation. Z-C1 will be used to remove cobalt in water as a more efficient absorbent.

• Advances in environmental research
• /
• v.1 no.2
• /
• pp.143-151
• /
• 2012

Nitrate removal from aqueous solution was investigated using $ZnCl_2$ and phosphoric acid activated carbon developed from pomegranate peel with particle size 0.4 mm. Potassium nitrate solution was used in batch adsorption experiments for nitrate removal from water. The effects of activated carbon dosage, time of contact, and pH were studied. The equilibrium time was fond to be 45 min. Two theoretical adsorption isotherms namely Langmuir and Freundlich were used to describe the experimental results. The Langmuir fit the isotherm with the theoretical adsorption capacity ($q_t$) was fond 78.125 mg g-1. Adsorption kinetics data were modeled using the pseudo-first, pseudo-second order, and intraparticle diffusion models. The results indicate that the second-order model best describes adsorption kinetic data. Results show activated carbon produced from pomegranate is effective for removal of nitrate from aqueous solution.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.125-130
• /
• 2010

In the present work, we have investigated the adsorption efficiency of carbon/iron oxide nanocomposite towards removal of hazardous brilliant green (BG) from aqueous solutions. Carbon/iron oxide nanocomposite was prepared by chemical precipitation and thermal treatment of carbon with ferric nitrate at $750^{\circ}C$. The resulting material was thoroughly characterized by TEM, XRD and TGA. The adsorption studies of BG onto nanocomposite were performed using kinetic and thermodynamic parameters. The adsorption kinetics shows that pseudo-second-order rate equation was fitted better than pseudo-first-order rate equation. The experimental data were analyzed by the Langmuir and Freundlich adsorption isotherms. Equilibrium data was fitted well to the Langmuir model with maximum monolayer adsorption capacity of 64.1 mg/g. The thermodynamic parameters were also deduced for the adsorption of BG onto nanocomposite and the adsorption was found to be spontaneous and endothermic.