• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1821-1826
• /
• 2014

The adsorption characteristics of the methylene blue (MB) were studied using three activated carbons such as ACA and ACB with similar specific surface area (1,185 and $1,105m^2/g$), and ACC with relatively high specific surface area ($1,760m^2/g$). The surface chemical properties of these activated carbons were investigated by X-ray photoelectron spectroscopy (XPS). The results indicated that ACA had more functional groups (with phenol, carbonyl, and carboxyl etc.) than ACB (with carbonyl and carboxyl) and ACC (with carboxyl). The isotherm data were fitted well by Langmuir isotherm model. The adsorption capacities of ACA, ACB, and ACC for MB were 454.7 mg/g, 337.7 mg/g, and 414.0 mg/g, respectively. As phenol and carboxyl content of the surface on activated carbon increased, MB adsorption capacity was increased. Although ACA had a smaller specific surface area than ACC, the content of phenol and carboxyl group was abundant, so MB adsorption capacity was found to be higher than ACC.

• 한국환경과학회지
• /
• 제14권12호
• /
• pp.1195-1201
• /
• 2005

In order to develop a dye coloring technology on Conchiolin layer in cultured pearls, appropriate dyes were selected, their solubilities in various solvents were studied, and adsorption and desorption experiments were performed. Solubilities of several basic dyes known to suitable for the pearl coloring, i.e., Rhodamine 6G(R6), Rhodamine B(RB) and Methylene Blue(MB), in several solvents (distilled water, methanol, ethanol, and acetone) were investigated. Among these dyes, R6 was chosen as a dye for single component adsorption and desorption experiment due to the relatively good solubility in various solvents tested. Solubilities of dyes were judged to be enough to color the pearls since dye concentrations in pearl coloring are, in general, not so high. The internal surface area of the pearl layer is believed to be directly related to the dye adsorption, the single-point internal surface area of the pearl layer measured at the nitrogen relative pressure of 0.3 was found to be $0.913m^2/g$, and the BET internal surface area, $1.01m^2/g$ The most probable diameters of micropores and macropores were found to be $40{\AA}$and $5000{\AA}$ respectively, from the pore size distribution data. Adsorption isotherm was well fitted to the Langmuir isotherm model, resulting in q=$\frac{1.62C}{1+1.09C^{.}}$

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.153-157
• /
• 2009

Arsenic at abandoned mine sites has adversely affected human health in Korea. In this study, the feasibility of using cationic surfactant-modified activated carbon (MAC) to remove As(V) was evaluated in terms of adsorption kinetics, adsorption isotherms, and column experiments. The adsorption of As(V) onto MAC was satisfactorily simulated by the pseudo-second-order kinetics model and Langmuir isotherm model. In column experiments, the breakthrough point of AC was 28 bed volumes (BV), while that of MAC increased to 300 BV. The modification of AC using cationic surfactant increased the sorption rate and sorption capacity with regard to As(V). As a result, MAC is a promising adsorbent for treating As(V) in aqueous streams.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.943-950
• /
• 2009

Cadmium (Cd) adsorption onto the activated carbon containing hydroxyapatite (HAP) was investigated in batch experiments and response surface methodology (RSM) using the Box-Behnken methods were applied to the experimental results. Cd adsorption with different HAP mass ratio of from 10% to 30%. With more HAP, Cd was more adsorbed. These results suggest that the higher HAP mass causes an increase of the ion exchange potential of the HAP sorbent. Equilibrium experimental results from Cd adsorption was fitted to Langmuir and Freundlich isotherm models. Cd adsorption on HAP sorbent were found to follow the Freundlich isotherm model well in the initial adsorbate concentration range. Also, Cd adsorption was a function of the HAP mass ratio ($x_1$), initial Cd concentration ($x_2$), and initial pH ($x_3$) from the application of the RSM. Statistical results showed the order of significance of the independent variables to be initial Cd concentration > HAP mass ratio > initial pH.

• 대한화학회지
• /
• 제66권2호
• /
• pp.78-85
• /
• 2022

천연 백토를 6M의 황산에 넣어 80 ℃의 온도로 기계적 교반하에서 6시간 동안 가열하여 처리 한 산활성 점토를 수중의 세슘 이온(Cs⁺)의 제거를 위한 흡착제로서 사용하였다. 천연 백토와 산활성 점토의 물리·화학적 변화를 X-선 형광분광기, 비표면적 분석기, 그리고 에너지 분산형 X-선 분광기를 이용하여 관찰하였다. 천연 백토를 산으로 처리 하는 동안, 천연 백토를 구성하고 있는 결정 격자로부터 Al₂O₃, CaO, MgO, SO₃ and Fe₂O₃가 일부분 용해되고 결과적으로 활성 부위와 더불어 기공의 부피와 비표면적의 증가를 초래하였다. 산활성 점토는 천연 백토에 비해 비표면적과 기공의 부피가 2배 정도 높았다. 산활성 점토에 의한 Cs⁺ 흡착은 1 분 내에 가파르게 증가하였고 60 분에 이르렀을 때 평형에 도달하였다. 25 mg L^-1의 Cs⁺ 농도에서, 96.88%의 흡착 효율이 산활성 점토에 의해 성취되었다. Cs⁺의 흡착 데이터를 흡착 등온선과 반응속도 모델에 도입하였다. 산활성 점토에 의한 Cs⁺ 흡착 거동은 Langmuir 등온선에 잘 적용되었고 Langmuir의 등온선 계수인 Q는 10.52 mg g^-1이 되는 것으로 밝혀졌다. 산활성 점토/물 계에서 Cs⁺ 흡착은 더 높은 상관계수 R²과 실험값 q_e,exp과 계산값 q_e,cal 의 근접으로 인해서 유사 일차 반응속도보다는 유사 이차 반응속도에 적합하였다. 연구의 전체적인 결과들은 산활성 점토가 수중으로부터 Cs⁺을 제거하는데 효율적인 흡착제로 사용될 수 있다는 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.406-414
• /
• 2010

A novel polyacrylamide grafted hydrous ferric oxide adsorbent composite has been synthesized by using glow discharge electrolysis plasma. To optimize the synthesis conditions, the following parameters were examined in detail: applied power, discharge time, post polymerization temperature, post polymerization time, amount of crosslinking agent and hydrous ferric oxide gel added and so on. The adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The removal percentage of the adsorbent in Pb(II) solution was examined and the data obtained showed that the adsorbent composite has a high capacity for lead ion. For the use in wastewater treatment, the thermodynamic and kinetic of Pb(II)-capture were also studied. Results indicated that the adsorption reaction was a spontaneous and an endothermic process, and it seems to be obeyed a pseudo-secondorder rate model. Moreover, the adsorption isotherm of Pb(II)-capture is following the Langmuir and Freundlich isotherm models.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.50-58
• /
• 2003

Removal of heavy metal ions (Cd$^{2+}$, Cr$^{3+}$, Cu$^{2+}$, Pb$^{2+}$) by several chitosans was studied and the molecular weight of chitosan was investigated in order to examine the effect of autoclaving. Chitosan were divided into 3 groups (A type, controlled chitosan; B type, autoclaved for 15 min; C type, autoclaved for 60 min). The heavy metal removal capacity and rate of B type chitosan were higher than those of A type and B type chitosan. The molecular weight of chitosan was decreased by the increase of autoclaving time. Therefore, the heavy metal capacity was not well correlated to the molecular weight. Freundlich and Langmuir isotherm was determined from the experimental results of equilibrium adsorption for individual heavy metal ions on chitosan. Langmuir isotherm was well fitted to this experimental data. The heavy metal removal capacity of B type chitosan was in the order of Pb$^{2+}$ > Cu$^{2+}$ > Cd$^{2+}$> Cr$^{3+}$.3+/.$.3+/.

• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.295-304
• /
• 2014

Adipic acid (hexane-1,6-dioic acid) is one of the most used chemical in industrial applications. This must be separated from any environmental contaminant. In this study, adipic acid separation from wastewater by adsorption method onto Perlite or Perlite + Mn or Perlite + Cu composites was investigated. Adsorption of Adipic acid was investigated in terms of equilibrium, and thermodynamic conditions. For thermodynamic investigations the experiments carried out at three different temperatures (298 K, 318 K, 328 K). In the equilibrium studies, 2 g of perlite and its composites were determined as the optimal adsorbent amount. Freundlich and Langmuir isotherms were applied to the experimental data. Freundlich isotherms for all temperatures used in this work gave some deviations with R square values under 0.98 where as Langmuir isotherm gave good results with R square values upper 0.99 at different temperatures. As a result of thermodynamic studies, adsorption enthalpy (${\Delta}H$), adsorption entropy (${\Delta}S$), and adsorption free energy (${\Delta}G$) have been calculated for each adsorbents.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.19-31
• /
• 1999

Most breakthrough tests are conducted at higher concentration levels compared to those in the field of air-purifying respirator applications. For example, typical challenge concentrations for breakthrough tests agains tcarbon tetrachloride are ranged between 250-1000 ppm although applicable concentrations range for air-purifying cartridge is 5-50 ppm for carbon tetrachloride. However, no guarantee has been made that isotherms derived from the experiment at high challenge concentrations could estimate adsorption capacity at the lower concentration range where workers wear usually air-purifying respirators. Three models of adsorption isotherms (Freundlich, Langmuir and Dubinin/Radushkevich(D/R) isotherms) that have been commonly applied for respirator cartridge testing were evaluated. Adsorption capacity at each challenge concentration was calculated from the Reaction Kinetic equation fitted for the breakthrough data. These data were used for derivation of three isotherms. In general, the D/R isotherm has given the best agreement between estimated adsorption capacities and experimentally measured. If the challenge concentration of 100 ppm is included for derivation of models, Freundlich and D/R models could succes sfully produced good estimations for adsorption capacities at 50 ppm level. Estimated adsorption capacities by both models ranged in 94 - 109 % of the experimentally measured. However, Langmuir model gives underes timation in all cases.

• 유기물자원화
• /
• 제24권1호
• /
• pp.3-10
• /
• 2016

질산과 염산에 의한 대나무활성탄(bamboo-based activated carbon, BAC)의 개질이 Pb(II)와 Cu(II)의 흡착특성에 미치는 영향을 규명하기 위해 회분식 흡착실험을 수행하였다. 산 개질에 의해 BAC의 탄소함량은 감소하고 산소함량은 증가하며 pH는 감소하는 것으로 나타났다. 염산에 의한 개질은 BAC에 뚜렷한 표면작용기를 첨가시키지 않았으나 질산에 의한 개질은 카르복실기와 OH 작용기를 첨가시키는 것으로 나타났다. BAC와 산으로 개질된 BAC의 중금속 이온 흡착속도는 2차 속도모델에 의해 적절하게 설명될 수 있는 것으로 나타나 흡착반응의 속도가 물리적 흡착보다는 흡착제와 금속이온들 사이의 전자들의 공유나 교환을 포함하는 화학적 흡착에 의해 결정되는 것으로 나타났다. 실험에 사용된 모든 흡착소재의 등온흡착특성은 Langmuir와 Freundlich 모델에 의해 적절하게 설명될 수 있으며 BAC의 염산에 의한 개질은 중금속 이온의 흡착용량에 큰 영향을 미치지 않으나 표면작용기를 첨가시킨 질산에 의한 개질은 Pb(II)와 Cu(II)의 흡착용량을 각각 36.0%와 27.3% 증가시키는 것으로 나타났다.