• 제목/요약/키워드: Lane departure avoidance

검색결과 6건 처리시간 0.021초

Development of A Lane Departure Monitoring and Control System

  • Huh Kunsoo;Hong Daegun;Stein Jeffrey L.
    • Journal of Mechanical Science and Technology
    • /
    • 제19권11호
    • /
    • pp.1998-2006
    • /
    • 2005
  • The lane departure avoidance systems have been considered promising to assist human drivers in AVCS (Advanced Vehicle Control System). In this paper, a lane departure monitoring and control system is developed and evaluated in the hardware-in-the-loop simulations. This system consists of lane sensing, lane departure monitoring and active steering control subsystems. The road image is obtained based on a vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active steering controller for avoiding the lane departure is designed based on the lane departure metric. The proposed lane departure avoidance system is realized in a steering HILS (hardware-in-the-loop simulation) tool and its performance is evaluated with a driver in the loop.

비전 센서 및 능동 조향 제어를 이용한 차선 이탈 방지 시스템 개발 (Development of a Lane Departure Avoidance System using Vision Sensor and Active Steering Control)

  • 허건수;박범찬;홍대건
    • 한국자동차공학회논문집
    • /
    • 제11권6호
    • /
    • pp.222-228
    • /
    • 2003
  • Lane departure avoidance system is one of the key technologies for the future active-safety passenger cars. The lane departure avoidance system is composed of two subsystems; lane sensing algorithm and active-steering controller. In this paper, the road image is obtained by vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active-steering controller is designed to prevent the lane departure. The developed active-steering controller can be realized by steer-by-wire actuator. The lane-sensing algorithm and active-steering controller are implemented into the steering HILS(Hardware-In-the-Loop Simulation) and their performance is evaluated with a human driver in the loop.

횡풍하의 차량 외란 추정을 이용한 차선 유지 조향 보조 제어기 설계 (Design of Lane Keeping Steering Assist Controller Using Vehicle Lateral Disturbance Estimation under Cross Wind)

  • 임형호;좌은혁;이경수
    • 자동차안전학회지
    • /
    • 제12권3호
    • /
    • pp.13-19
    • /
    • 2020
  • This paper presents steering controller for unintended lane departure avoidance under crosswind using vehicle lateral disturbance estimation. Vehicles exposed to crosswind are more likely to deviate from lane, which can lead to accidents. To prevent this, a lateral disturbance estimator and steering controller for compensating disturbance have been proposed. The disturbance affecting lateral motion of the vehicle is estimated using Kalman filter, which is on the basis of the 2-DOF bicycle model and Electric Power Steering (EPS) module. A sliding mode controller is designed to avoid unintended the lane departure using the estimated disturbance. The controller is based on the 2-DOF bicycle model and the vision-based error dynamic model. A torque controller is used to provide appropriate assist torque to driver. The performance of proposed estimator and controller is evaluated via computer simulation using Matlab/Simulink.

능동 안전장치의 한국 운전자 주행 평가 (Active Safety Features Evaluation with Korean Drivers)

  • 이화수;조재호;임종현;이홍국;장경진;유송민
    • 자동차안전학회지
    • /
    • 제6권1호
    • /
    • pp.27-32
    • /
    • 2014
  • A study assessing driver acceptance level for various active safety systems against Korean drivers has been conducted. A 2013 Cadillac ATS model vehicle was tested along southern outskirt of Seoul including local roadway and interurban highway. Active safety systems included were FCA(Forward Collision Alert), LDW(Lane Departure Warning), SBZA(Side Blind Zone Alert), FRPA(Front/Rear Park Assist), RCTA(Rear Cross Traffic Alert), ACC(Adaptive Cruise Control), and AEB(Autonomous Emergency Braking). Participants experienced the FRPA, RCTA and AEB features in a controlled parking lot with a dummy vehicle and traffic cones as target obstacles. Remaining features have been tested on the accumulated stretched of 106 km long urban and interurban roadway. Series of questionnaires corresponding to each active safety systems have been conducted. Tentative results revealed that RCTA and SBZA systems received favourable ratings compared to the other ones.

도로 주행평가를 통한 능동 안전장치 연구 (A Study on the Active Safety Features Assessment through Test Drive)

  • 이화수;조재호;임종현;이홍국;장경진;유송민
    • 자동차안전학회지
    • /
    • 제7권1호
    • /
    • pp.33-39
    • /
    • 2015
  • This study examined the drivers' acceptance level of various active safety features with Korean drivers on Seoul urban and city roads. The test vehicle, 2013 Cadillac ATS, was equipped with FCA(Forward Collision Alert), LDW(Lane Departure Warning), SBZA(Side Blind Zone Alert), FRPA(Front/Rear Park Assist), RCTA(Rear Cross Traffic Alert), ACC(Adaptive Cruise Control), and AEB(Autonomous Emergency Braking). Participants had chances to run the tests on those systems in the parking lot accompanied by the 106km long stretch of predetermined route including local road and interurban highway in Seoul and Gyeonggi-do under normal traffic flowing environment. After the test, participants completed a series of questionnaires about the features they experienced. The results revealed that RCTA and SBZA systems received more favourable ratings compared to the other features in avoiding crashes. The respondents preferred sound alerts to haptic ones even though haptic warning methods were better in providing directional information.

저가형 DSP를 사용하는 FMCW 레이더 신호처리부의 효율적 구현 방안 (Efficient Implementation of FMCW Radar Signal Processing Parts Using Low Cost DSP)

  • 오우진
    • 한국정보통신학회논문지
    • /
    • 제20권4호
    • /
    • pp.707-714
    • /
    • 2016
  • 차량용 능동안전 시스템은 전방충돌방지, 차선이탈 경보, 차선변경 지원 등이 있으며 소형차에 도입될 정도로 대중화되고 있다. 대표적인 능동안전 시스템인 FMCW 레이더는 가격 경쟁력과 성능개선을 위해 전방과 측면용 레이더의 통합과 위상배열이나 다중 안테나의 적용이 연구되고 있다. 본 논문에서는 이러한 차량용 FMCW레이더 시스템의 신호처리부를 저가의 DSP로 구현하기 위한 효율적인 방안들을 제안한다. PWM기반의 아날로그 변환, 계산량을 줄이는 근사화 기법, 효율적인 벡터연산 등을 제안하고 구현하였다. 구현된 신호처리 보드는 1.4ms의 펄스 반복간격에서 1024길이의 FFT 처리가 실시간 성능을 보였다. 실제 도로 실험에서 10Hz의 갱신율로 실시간 동작과 성능을 확인하였다.