Poly-${\beta}$-hydroxybutyrates(PEB)는 토양에서 완전히 이산화탄소와 물로 분해되는 세포 내에 생성되는 고분자 물질로 잘 알려져 있다. Alcaligenes eutrophus의 세포 성장과 PHB의 생산성을 증가시키기 위해서 가압배양법이 사용되었다. 실험 데이타를 다양한 가압과 온도하에서 탄소 공급원과 기체성분의 영향에 관해서 분석한 결과 0.0075vvm의 기체수소를 공급한 배양이 수소를 공급하지 않은 배양에 비해 더 나은 PEB 생산성을 나타내었고, 6atm, $30^{\circ}C$에서 산소의 성분비를 2%에서 8%로 변화시켰을 때 더 높은 수율과 PEB의 생산성을 얻을 수 있었다.
본 연구는 건조, 퇴비화, 고화로 전처리된 유기성오니와 생활폐기물을 각각 2 : 8과 4 : 6으로 혼합하여 매립할 경우 매립지 환경에 미치는 영향을 평가하고 유기성오니의 직매립금지 조치이후 적정 처리방안을 모색하기 위하여 실시하였다. 고화오니는 약 1,800$\sim$2,500 L의 가장 활발한 가스발생량을 나타내어 건조 및 퇴비오니의 1,150$\sim$1,650 L 보다 높았다. 악취 중 황화수소 최대농도는 Composted-20(약 80 ppmv) > Composted-40(약 55 ppmv) > Dried-20(약 30 ppmv) > Dried-40 $\fallingdotseq$ Solidified-20 $\fallingdotseq$ Solidified-40 (약 20 ppmv)순으로 나타났다. 침출수 발생초기 BOD$_5$는 Composted-40에서 약 38,000 mg/L으로 가장 높게 나타났으며, Dried-40이 약 28,000 mg/L, Dried-20이 약 26,000 mg/L, Composted-20과 Solidified-40이 21,000 mg/L를 나타내었으며, Solidified-20이 17,000 mg/L로 가장 낮았다. 570일차 고화오니의 BOD$_5$는 300$\sim$500 mg/L, 건조 및 퇴비오니는 2,000$\sim$3,500 mg/L의 농도를 나타내었다. 고화처리된 오니를 생활폐기물과 혼합할 경우 빠른 분해로 매립가스가 가장 많이 발생되었으며, 악취 및 침출수 농도도 가장 낮게 나타나 유기성 고화처리 후 매립쪽으로 유도되는 것이 가장 바람직하였다. 최근 매립가스 재이용(CDM) 사업을 수행하는 매립장에 대해서는 직매립을 허용하고 있으므로 유기성오니 매립시에는 반드시 생활폐기물과 혼합하는 것이 필요하며, 메탄가스를 보다 많이 생산하기 위해서는 고화오니를 혼합매립하는 것이 가장 유용할 것으로 판단된다.
An adsorption process to recover the pure $CH_4\;and\;CO_2$ from its mixture was examined. In this study, activated carbon fibers were used as a selective adsorbent. The activated carbon fibers has 78~94% micropore volume and 10.5~20.3${\AA}$ narrow pore size, and showed high adsorption rate and the good selectivity for $CO_2$ under the ambient pressure. The ACF with high surface area showed short mass transfer zone and long breakthrough time and, its adsorption capacity depended on the microporosity. Compared with single component adsorption, the amount adsorbed $CO_2$ on ACF increased by the roll-up of $CH_4$ in mixed gases. The adsorption selectivity increased as now rate and $CO_2$ concentration of mixed gases increased, showing 5.2 selectivity for 75% $CO_2$ concentration.
In this paper, air pollutant tracing models using perceptron neural network(PNN) and non-negative least square(NNLS) are proposed. When the measured values of the air pollution and the contribution concentration of each source by chemical transport modeling are given, they estimate and trace the amount of the air pollutants emission from each source. Two kinds of emissions data are used in the experiments : CH4 and N2O of Geumgo-dong landfill greenhouse gas, and PM10 of 17 areas in Northeast Asia and eight regions of the Korean Peninsula. Emission values were calculated using pseudo inverse method, PNN and NNLS. Pseudo inverse method could be used for the model, but it may have negative emission values. In order to deal with the problem, we used the PNN and NNLS methods. As a result, the estimation using the NNLS is closer to the measured values than that using PNN. The proposed tracing models have better utilization and generalization than those of conventional pseudo inverse model. It could be used more efficiently for air quality management and air pollution reduction.
대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
/
pp.9-18
/
2001
1. EAF Dust in Japan - Generation and Characteristics. The quantity of dust generated from EAF shops in Japan was estimated to be 520,000 tons/year in 1999. Extremely fine dust (or fume) is formed in the EAF by metal vaporization. Its characteristics such as chemical compositions, phases, particle size, leaching of heavy metal are mentioned. 2. EAF Dust Treatment Methods in Japan. In 1999, 61% of EAF dust was treated by regional zinc recovery processing routes, 25% went to landfill disposal, 4% was reused as cement material, and 10% was treated by on-site processing routes. The problems of EAF dust treatment methods in Japan are: (1) very high treatment cost, and (2) heavy environmental load (leaching of heavy metal, emission of dioxins, depletion of disposal sites, etc). It has been much hoped for that new dust management technology would be developed. 3. New technology of EAF dust treatment in Japan. In Japan, some new technologies of EAF dust treatment have been developed, and some others are in the developing stages. Following five processes are mentioned:. (1) Smelting reduction process by Kawasaki Steel, (2) DSM process by Daido Steel, (3) VHR process by Aichi Steel, (4) On-site dust direct recycling technology, and (5) Process technology of direct separation and recovery of iron and zinc metals contained in high temperature EAF off gas by the Japan Research and Development Center fur Metals.
유기성 폐기물의 혐기성발효공정에 의한 바이오가스 연구가 다양한 목적으로 활발하게 진행되고 있다. 혐기성공정 또는 매립지에서 생성되는 바이오가스의 주요 조성은 메탄, 이산화탄소와 미량의 황화수소와 암모니아로 구성되며, 생산지에서 불순물을 정화시킨 후 바로 사용하거나 혹은 파이프라인을 통해 천연가스처럼 사용할 수 있다. 생산된 바이오가스는 열과 스팀생산, 전기생산, 자동차용 연료 및 화학물질 생산 등에 사용되어질 수 있다. 바이오가스는 사용 용도에 따라 여러 나라들의 관련 규정들이 정비되고 있지만 아직까지 국제적으로 공인된 표준 규격은 없다. 본 논문에서는 세계 각국의 바이오가스 용도별 품질특성을 살펴보았다.
본 연구는 폐기물처리시설의 설치·정기검사방법 개선을 도모하기 위해 6개 분야로 분류된 폐기물처리시설을 현장조사하여 검사방법의 문제점을 파악하고 그에 따른 개선방향을 마련하여 폐기물처리시설 세부검사방법을 개정하고자 하였다. 그 결과 소각, 소각열회수 분야에서는 열화상카메라를 활용한 전체온도 측정 및 1년간의 TMS 데이터를 비교 등의 검사방법을 마련하였으며, 멸균분쇄시설의 경우 「폐기물의 조성비 검사」는 검사자 및 피검사자의 안전상의 이유로 폐기물을 개봉하지 않고 서류로 대체할 수 있도록 적용하였다. 매립시설의 경우 영상정보처리기기 활용 및 매립시설 상부를 덮는 시설물의 관리에 대한 내용 등 법에는 제시되어 있으나 세부검사방법이 마련되어있지 않은 항목을 세부검사방법에 적용하였다. 음식물류폐기물처리시설의 경우 민원의 주요원인인 악취관리에서 악취배출허용기준을 준수하도록 검사방법을 마련하였다. 그 결과, 소각 및 멸균분쇄, 시멘트소성로, 소각열회수시설에서는 총 18개의 개선(안) 중 10개가 반영되었으며, 매립시설의 경우 총 12개의 개선(안)중에서 11개가 반영되었다. 또한 음식물류폐기물처리시설의 경우 총 12개의 개선(안)중에서 10개가 반영되어 총 31개의 검사방법이 개선되었다.
이산화탄소($CO_2$)는 천연 가스, 바이오 가스, 매립 가스의 성분으로 존재할 뿐만 아니라 화석연료의 주요 연소 생성물로써 온실 가스의 주범이다. 특히 내연기관의 연료 고효율을 얻고, 가스 수송시스템의 부식을 방지하며, 기후변화에 선제적으로 대응하기 위해서는 이산화탄소($CO_2$)의 저감 또는 제거 기술이 필수적이다. 지난 수십 년간, 멤브레인 기반 기술의 구성 및 설계 단순성에 의하여 관련 연구가 많이 이루어져 왔으며 많은 발전을 이루었다. 최근 들어, 기존 멤브레인 기반 분리 뿐만 아니라, 새로운 흡착제 기반 분리 기술 등에 대한 관심도 높아지고 있다. 특히, 최근 각광받고 있는 유기-금속 골격체(Metal Organic Frameworks, MOFs)의 경우, 일반 다공질 흡착제와는 다른 독특한 성질(Flexibility, Gating effect 또는 Open Metal Sites 등)로 인하여, 이를 활용한 다양한 기체 분리 연구가 늘어나고 있는 추세이다. 따라서 본 연구에서는 대표적 플렉서블한 물질인 MIL-53(Al)과 강한 결합에너지 site를 다수 보유한 대표적 MOF 물질인 MOF-74(Ni)를 활용하여 온도 및 압력에 따른 이산화탄소 메탄 분리 성능 비교 분석하였으며, 각 물질의 특성별 압력 및 온도에 따라 변화하는 적정 분리 구간을 제시하였다.
우리사회는 고도화, 첨단화, 정보화 산업들이 지속적으로 성장을 거듭하여 현재는 4차 산업 혁명의 시대에 살고 있다. 산업이 발달함에 따라 사용자의 부하도 다양하게 급증하였고 이는 에너지 부족 현상으로 심화되어 추가적인 에너지 시설의 건설이 요구되고 있는 실정이다. 이에 해안 지역을 중심으로 에너지 플랜트 건설공사가 활발히 진행되고 있다. 특히, 발전소 가스 석유화학 플랜트 등의 건설 시 국토가 부족한 우리나라의 실정을 고려하여 타 지역의 토양으로 해안을 매립하고 그 지반에 플랜트 시설을 건축하는 방식으로 시행되고 있다. 현재의 국내 접지 설계는 전기설비설계기술기준에 근거한 접지저항만을 용도에 맞게 결정하는 설계와 시공이 이루어지고 있다. 하지만 이렇게 검증되지 않은 매립된 토양에 건립한 플랜트 시설에 뇌격전류 및 이상전류 유입 시 대지 전위상승으로 인한 설비 운용자나 사용자가 감전재해 위험에 심각하게 노출 되게 된다. 따라서 플랜트 시설의 부하 특성에 최적화된 접지시스템이 요구되고 있어, 본 논문에서는 매립된 토양의 대지고유저항을 분석하고 KS C IEC 61936-1 규격을 적용한 컴퓨터 프로그램(CDEGS)을 활용하여 감전재해를 일으키는 접촉전압과 보폭전압을 해석하여 플랜트 설비에 최적화된 접지설계를 제안하고자 한다.
Anaerobic digestion(AD) has successfully been used for many applications that have conclusively demonstrated its ability to recycle biogenic wastes. AD has been successfully applied in industrial waste water treatment, stabilsation of sewage sludge, landfill management and recycling of biowaste and agricultural wastes as manure, energy crops. During AD, i.e. organic materials are decomposed by anaerobic forming bacteria and fina1ly converted to excellent fertilizer and biogas which is primarily composed of methane(CH4) and carbon dioxide(CO2) with smaller amounts of hydrogen sulfide(H2S) and ammonia(NH3), trace gases such as hydrogen(H2), nitrogen(N2), carbon monoxide(CO), oxygen(O2) and contain dust particles and siloxanes. The production and utilisation of biogas has several environmental advantages such as i)a renewable energy source, ii)reduction the release of methane to the atomsphere, iii)use as a substitute for fossil fuels. In utilisation of biogas, most of biogas produced from small scale plant e.g. farm-scale AD plant are used to provide as energy source for cooking and lighting, in most of the industrialised countries for energy recovery, environmental and safety reasons are used in combined heat and power(CHP) engines or as a supplement to natural. In particular, biogas to use as vehicle fuel or for grid injection there different biogas treatment steps are necessary, it is important to have a high energy content in biogas with biogas purification and upgrading. The energy content of biogas is in direct proportion to the methane content and by removing trace gases and carbon dioxide in the purification and upgrading process the energy content of biogas in increased. The process of purification and upgrading biogas generates new possibilities for its use since it can then replace natural gas, which is used extensively in many countries, However, those technologies add to the costs of biogas production. It is important to have an optimized purification and upgrading process in terms of low energy consumption and high efficiency giving high methane content in the upgraded gas. A number of technologies for purification and upgrading of biogas have been developed to use as a vehicle fuel or grid injection during the passed twenty years, and several technologies exist today and they are continually being improved. The biomethane which is produced from the purification and the upgrading process of biogas has gained increased attention due to rising oil and natural gas prices and increasing targets for renewable fuel quotes in many countries. New plants are continually being built and the number of biomethane plants was around 100 in 2009.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.