• 한국물환경학회지
• /
• 제36권2호
• /
• pp.98-108
• /
• 2020

The purpose of this study was to evaluate water quality in Hapcheon dam via using the Hydrological Simulation Program-Fortran (HSPF) model and applied livestock reduction scenarios. Hapcheon dam watershed input data for the HSPF model were established using the stream, land use, digital elevation map and meteorological data and others. The HSPF model was calibrated and validated using the observed water quality data from 2000 to 2016. For water quality simulation, we calculated the generated and discharge loads of the population, livestock, industry and land use following the guideline provided by the Ministry of Environment. The pollutant data were obtained from National Institute of Environmental Research (NIER). The monthly discharge load were estimated by applying the delivery rate. The calibration and validation results showed that the annual mean BOD had a difference of 0.22 mg/L and an error of ±13 %, T-N had a difference of 0.66 mg/L and an error of ±16 % and T-P had a difference of 0.027 mg/L and an error of ±13 %. In order to evaluate the nonpoint pollutants management effects, we applied livestock reduction scenarios because livestock consists of the largest portion of pollutants. As a result of the 20 % of livestock reduction, BOD, T-N and T-P decreased by 3 %, 1 % and 3 %, respectively. When 40 % of livestock reduction was applied, BOD, T-N and T-P decreased by 5 %, 3 % and 4 %, respectively. Based on the results of this study, effective pollutant management methods can be applied to improve the water quality and achieve the target water quality of Hapcheon dam watershed.

• 토지주택연구
• /
• 제3권3호
• /
• pp.279-286
• /
• 2012

뢰성에 기반한 한계상태설계법은 국제표준화기구인 ISO뿐만 아니라 국내의 각종 건설관련 기준에서도 적용되는 등 국내외적으로 기존 허용응력설계법을 대체하고 있는 실정이다. 본 논문에서는 국내에서 건축물의 기초로 많이 사용되고 있는 PHC 매입말뚝을 대상으로 한계상태설계법의 일종인 LRFD 설계정수를 제안하였다. PHC 매입말뚝의 LRFD 설계정수를 제안하기 위해 81개의 현장 동재하 시험자료와 이들 말뚝에 대한 지지력 설계(Meyerhof 설계법, SPT-CPT 전환 설계법) 자료를 분석하고 목표 신뢰도 지수 2.33과 3.0에 대해 하중저항계수를 제시하였다. PHC 매입말뚝의 저항계수는 목표 신뢰도 지수에 따라 Meyerhof 방법, SPT-CPT 전환법은 각각 0.36~0.44, 0.24~0.31을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제28권6호
• /
• pp.542-550
• /
• 1996

Nuclear ship reactors have several features different from land-based PWR's. Especially, effects of ship motions on reactor thermal-hydraulics and good load following capability for abrupt load changes are essential characteristics of nuclear ship reactors. This study modified the RETRAN-03 to analyze the thermal-hydraulic transients under three-dimensional ship motions, named RETRAN-03/MOV in order to apply to future marine reactors. First Japanese nuclear ship MUTSU reactor have been analyzed under various ship motions to verify this code. Calculations have been peformed under rolling, heaving and stationary inclination conditions during normal operation. Also, the natural circulation has been analyzed, which can provide the decay heat removal to ensure the passive safety of marine reactors. As results, typical thermal-hydraulic characteristics of marine reactors such as flow rate oscillations and S/G water level oscillations have been successfully simulated at various conditions.

• 토지주택연구
• /
• 제4권3호
• /
• pp.295-301
• /
• 2013

본 논문에서는 국내의 초고층 주상복합건축물들에 대하여 층수와 높이 등의 규모 및 구조형식과 횡력저항 시스템의 유형 및 사용 재료의 강도와 층별 콘크리트 강도의 조닝 등에 대하여 조사 분석하여, 이를 토대로 초고층 주상복합 건축물의 구조 계획 유형을 분석하였다. 조사한 결과, 국내 초창기 초고층 주상복합 건축물의 구조시스템은 도곡동 타워팰리스와 같이 철골철근콘크리트구조(SRC)로 건설된 사례가 많았으나, 2005년 이후에는 대부분이 철근콘크리트(RC)구조로 건설되었다. 구조체에서 코어부분을 전단벽으로 배치하여 횡력저항 시스템으로 활용하고 있고, 콘크리트의 강도는 층수에 따라 고층부, 중간부, 저층부로 나누어 강도를 조닝하여 적용하고 있었다. 사례조사를 토대로 국내에 주상복합건축물의 대표적인 유형으로 건설되고 있는 40층 및 60층 규모의 건축물에 대한 구조계획 기초자료를 제시하였다.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.91-101
• /
• 2004

For the grillage which is common types of structures in marine and land-based structural system, the elastic response and design methods are usually applied. However, plastic analysis and design methods are considered Tn those structures to maintain the structural stability at the limit states. In grillage design, the central intersection point load may be used as a worst loading condition. However, a point load may often move around on the grid system. in such case, the worst load point would not necessarily be at the central point. To investigate the variation of plastic collapse load according to the location of moving load between intersections, the plastic collapse loads are obtained for the three types of grillages with simply-supported ends. From the result of each case, it is confirmed that the worst load point is located between intersections. General formulae related with plastic collapse loads for the three groups of grillages with simply-supported boundaries are derived. Those plastic collapse formulae for the grillages are applied to the design of pontoon deck, and optimum design procedure is illustrated. Consequently, general formulae for the plastic collapse of grillages derived from this study can be easily applied to the plastic analysis and optimum design of similar grillages.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.469-488
• /
• 2022

Technology for high-level-waste disposal employing a multibarrier concept using engineered and natural barrier in stable bedrock at 300-1,000 m depth is being commercialized as a safe, long-term isolation method for high-level waste, including spent nuclear fuel. Managing heat generated from waste is important for improving disposal efficiency; thus, research on efficient heat management is required. In this study, thermal management methods to maximize disposal efficiency in terms of the disposal area required were developed. They efficiently use the land in an environment, such as Korea, where the land area is small and the amount of waste is large. The thermal effects of engineered barriers and natural barriers in a high-level waste disposal repository were analyzed. The research status of thermal management for the main bedrocks of the repository, such as crystalline, clay, salt, and other rocks, were reviewed. Based on a characteristics analysis of various heat management approaches, the spent nuclear fuel cooling time, buffer bentonite thermal conductivity, and disposal container size were chosen as efficient heat management methods applicable in Korea. For each method, thermal analyses of the disposal repository were performed. Based on the results, the disposal efficiency was evaluated preliminarily. Necessary future research is suggested.

• International journal of advanced smart convergence
• /
• 제13권1호
• /
• pp.185-193
• /
• 2024

This study aimed to investigate the immediate physiological responses, including heart rate, blood pressure, and rate pressure product (RPP), following squat exercises performed at three water depths (ground, knee depth, waist depth) and two speed conditions (60bpm speed, Max speed). The participants consisted of 10 men in their 20s with over 6 months of resistance exercise experience. For the 60bpm speed squats, participants performed 30 repetitions in 1 minute at a rate of 2 seconds per repetition, while for Max speed squats, they performed at Max speed without a set limit on the number of repetitions for 1 minute. All experiments were conducted with a random assignment. The study results showed that immediately after the aquatic squat exercise, the average heart rate, blood pressure, and cardiac load were higher in the order of knee depth, ground level, and waist depth at both 60bpm speed and Max Speed. At 60bpm speed, the heart rate was higher in the order of ground level, knee depth, and waist depth. Overall, exercise in an aquatic environment was considered to impose relatively lower physical burden compared to land-based exercise. Therefore, it is suggested that depending on individual fitness levels and exercise goals, appropriately combining aquatic exercise, which imposes lower immediate physiological burden, and land-based exercise may lead to safer and more effective exercise methods.

• 한국환경과학회지
• /
• 제16권5호
• /
• pp.571-581
• /
• 2007

본 연구는 생태계 모델을 이용하여 수질오염이 심각한 시화호의 수질을 재현하고, 시화호 내로 유입하는 육상기원 오염부하량의 변동에 따른 시화호의 수질변화를 살펴보았다. 모델에 의해 계산된 화학적 산소요구량 결과는 관측치와의 상관성이 양호하였으며, 하천이 밀집한 호의 내측 수역에서 $8{\sim}9mg/L$의 높은 농도분포를 나타내었고, 방조제 수문이 위치한 남서쪽 수역에서 5 mg/L 내외의 가장 낮은 농도분포 특성을 보였다. 시화호로 유입하는 육상오염부하가 시화호의 수질에 미치는 영향을 살펴보았는데, 육상오염부하량을 95% 삭감시켜도 시화호의 화학적산소요구량 농도는 3 mg/L 내외로 계산되었으며, 이것은 해역생활환경 II등급 기준인 2mg/L를 초과하는 것으로써 육상으로부터 유입되는 오염부하의 삭감만으로는 수질개선에 한계가 있는 것으로 예측되었다. 한편, 퇴적물을 인위적으로 개선하여 퇴적물로부터 인과 질소의 용출량과 저층 산소소비율을 삭감시켰을 경우에 시화호 수질의 개선효과가 나타났다. 특히, 육상으로부터 유입하는 유기물 및 영양염류 부하와 퇴적물에 의한 영양염류 용출부하 및 산소소비율을 동시에 삭감하였을 경우에 시화호 내 대부분의 수역에서 $1.5{\sim}2.0mg/L$ 이내로 수질이 크게 개선되는 것으로 나타났다. 따라서, 시화호는 육상기원 오염부하량을 상당량 삭감하여도 목표수질 기준을 만족하기가 상당히 어려울 것으로 예측되었고, 퇴적물을 인위적으로 개선시키면 보다 뚜렷한 수질 개선의 효과를 얻을 수 있는 것으로 나타났다. 시화호 내측과 외측수역과의 해수 교환량이 적고 퇴적물의 오염이 심한 현 상태의 환경조건에서 해역생활환경 III등급 기준인 4 mg/L 이하를 달성하기 위한 시화호의 환경용량은 화학적산소요구량 기준으로 5 톤/일로 산정되었다. 향후 시화호의 수질관리를 위해서는 시화호를 포함한 유역별로 뚜렷한 개선목표를 설정하고 배출원별 할당부하량을 산정하여 오염물질 총량관리를 통해 시화호 주변 유역의 점원, 비점원 및 시화호 내퇴적물 등을 종합적으로 고려하여 관리해 나가야 할 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.437-440
• /
• 2008

In recent years, pollution load calculation has become a topic for research that resulted in the development of numerous GIS modeling methods. The existing pollution method for nonpoint source (NPS) can not be indentified and calculated the amount of the pollution precisely. This research shows that the association of typical pollutant concentrations with land uses in a watershed can provide a reasonably accurate characterization of nonpoint source pollution in the watershed using Expected Mean Concentrations (EMC). The GIS based pollution assessment method is performed for three pollutant constituents: BOD, TN, and TP. First, the runoff grid by means of the precipitation grid and runoff coefficient is estimated. Then, the NPS pollution loads are calculated by grid based method. Finally, the final outputs are evaluated by statistical technique. The results illustrate the merits of the approach. This model verified that GIS based method of estimating spatially distributed NPS pollution loads can lead to more accurate representation of the real world.

• 토지주택연구
• /
• 제7권1호
• /
• pp.53-63
• /
• 2016

본 논문은 옥상녹화하중 세 가지 유형(경량형, 중량형, 혼합형)이 한국토지주택공사(이하 LH)에서 공급하는 공동주택과 부대복리시설의 옥상층 슬래브에 미치는 영향을 구조해석과 설계를 통해 평가하고, 이를 토대로 옥상녹화하중이 작용하는 옥상층 슬래브의 구조설계시 활용가능한 배근 가이드 라인을 제시하였다. 구조해석 및 설계결과, 옥상녹화하중의 종류에 관계없이 LH 공동주택의 옥상층 슬래브는 슬래브 주근을 D10 철근 200~250mm 간격으로 배근할 경우 안전하며, 슬래브 두께도 150mm로 적용가능한 것으로 나타났다. 콘크리트 설계강도가 24, 27, 30MPa로 변화하여도 옥상층 슬래브의 슬래브 주근은 D10 철근을 200~250mm 배근하고 슬래브 두께도 150mm가 적용가능한 것으로 나타났다. 옥상녹화하중이 작용하는 부대복리시설의 2방향 슬래브는 토양 종류와 토심 두께에 관계없이 D10철근을 200mm 간격으로 배근하고 슬래브 두께도 150mm로 적용가능한 것으로 나타났다.