• 한국가구학회지
• /
• 제20권2호
• /
• pp.122-135
• /
• 2009

The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.363-369
• /
• 2001

By alternating $Al_{18}B_4O_{33}$/AC4CH composites with Al1050 sheets and then hot pressing, MMC/Al laminate composites have been successfully fabricated as parameters of the laminate structure and the number of Al sheet. Impact properties for laminate composites have been evaluated both in the laminate structure and in the impact load direction. Lamination of Al sheet and MMC layer showed a remarkable improvement in the absorbed impact energy compared to that of monolithic MMC. Laminate composites mounted with Al sheet at the outside of the configuration had a higher impact energy in the edge wise compared to that with Al sheet at the inside. Furthermore, there was an anisotrpy in the impact value of laminate composites, that is, impact values for the flat wise in a constant volume fraction of Al sheet dramatically increased along with Al sheet number, even if impact values fur the edge wise were nearly constant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.299-301
• /
• 1997

It was investigated that space charge characteristics of EPDM/XLPE laminates as a function of interfacial condition. There were no effects in charge accumulation characteristics at EPDM/XLPE laminate samples pasted treated silicone oil and silicone grease. But when the crosslinking coagent (TMPTA) was pasted in laminate samples, there was no space charge in interface of EPDM/XLPE laminate. There were no effects in the laminate sample pasted silicone grease dissolved crosslinking coagent. In the coupling agent pasted EPDM/ XLPE laminate sample, space charge was accumulated in XLPE side caused by coupling agent.

• Structural Engineering and Mechanics
• /
• 제39권2호
• /
• pp.169-186
• /
• 2011

This paper is devoted to the development of the equations which describe the elastic response of a curved laminate subjected to in-plane loads and bending moments. Similar to the classic $6{\times}6$ ABD matrix constitutive relation of a flat laminate, a new $6{\times}6$ matrix constitutive relation between force resultants, moment resultants, mid-plane strains and deformed curvatures for a curved laminate is formulated. This curved lamination theory will provide the fundamental basis for the analyses of curved laminated structures. The stress predictions by the present curved lamination theory are compared to those by the curved laminate analysis that neglected the nonlinear terms in the derivation of the constitutive relation. The results show that the curved laminate analysis that neglected the nonlinear terms cannot reflect the effect of curvature and can no longer predict the stresses accurately as the curvature becomes noticeable. In this paper, a curved lamination theory that retains the nonlinear terms and, therefore, accounts for the effect of the non-flat geometry of the structure will be developed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.140-143
• /
• 1997

It was investigated that space charge characteristics of EPDX/LPE laminates as a function of interfacial condition. There were no effects in charge accumulation characteristics at EPDM/XLPE laminate samples which were pasted with silicone oil and silicone grease. But when the crosslinking coagent (TMPTA) was pasted in laminate samples, there was no space charge in interface of EPDE/XLPE laminate and no effects in the laminate sample pasted with silicone grease dissolved crosslinking coagent. In the coupling agent pasted EPDhyXLPE laminate sample, space charge was accunlulated in XLPE side caused by coupling agent.

• 전자통신동향분석
• /
• 제11권1호통권39호
• /
• pp.29-47
• /
• 1996

본 고는 전자통신시스템 및 단말기의 소형화 및 고기능화를 위하여 대두되고 있는 다중칩 모듈(Multichip Module; MCM)중 Laminate기술을 기본으로 하며 대량생산이 가능한 Multichip Module-Laminate(MCM-L)기술에 대하여 논하고 있다. 본 내용에는 전기 및 열특성을 결정하는 기판재료, Laminate에서의 Via 및 Pad의 한계, MCM의 성능과 관련된 시험방법 등이 있으며, 마지막으로, 통신 및 타분야의 MCM 응용사례를 조사분석하고 향후 MCM의 기술발전방향을 예측해 보았다.

• 대한심미치과학회지
• /
• 제29권1호
• /
• pp.25-34
• /
• 2020

무삭제 라미네이트에서 사용하는 여러가지 방법 중에 press ingot을 이용한 제작 방법에 대해 기술했다. 무삭제 라미네이트는 제작 방법 및 보철물의 피개 범위를 선택하는 것이 매우 중요하며 결과에 큰 영향을 끼친다. 피개 범위와 제작 방법에 따른 장단점을 미리 숙지하고 선택함으로써 효과적이고 보다 나은 결과물을 만들 수 있다. 구강내 상황에 따라 선별적으로 잘 적용했을 때 치아를 삭제하지 않고 매우 만족스러운 결과를 낼 수 있는 선택지 중 하나라 생각한다.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.130-138
• /
• 1995

Machined graphite/epoxy surfaces were studied by using SEM (Scanning Electron Microscopy), surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and multidirectional laminate composite. The surface roughness and profile are found to be highly depdndent on the fiber layup direction and the measurement direction. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters $R_{a}$ without $D_{y}$(Maximum Damage Depth) region and $D_{y}$are better descriptors of the machined laminate composite surface than commonly used roughness parameters $R_{a}$and $R_{max}$ The characteristics of surface profiles in laminate composite are well represented in CPD (Cumulative Probability Distribution) plot and PPD (Percentage Probability Density) plot. Edge-trimmed multidirectional laminate surfaces are Gaussian and random for profiles measured along the tool movement direction, they are periodic and non-Gaussian in the direction perpendicular to the tool movement.t.ent.t.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.482-505
• /
• 1993

The purpose of this study was to evaluate the fracture characteristics and the effect of resin bonding of laminate porcelain. In order to characterize the indentation-induced crack, Young's moduli and characteristic indentation dimensions were measured. The fatigue life under three point flexure test was measured using the electro-dynamic type fatigue machine, and the crack propagation with thermocycling was investigated on the condition of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ bath. The Vickers indentation pattern and the fracture surface were examined by an optical microscope and a scanning electron microscope (SEM). The results obtained were summarized as follows ; 1. Young's moduli(E) of the laminate porcelain and the resin cement used in this experiment were $62.56{\pm}3.79GPa$ and $15.01{\pm}0.12GPa$, respectively. 2. The initial crack size of the laminate porcelain was $69.19{\pm}5.94{\mu}m$ when an indentation load of 9.8N was applied, and the fracture toughness was $1.065{\pm}0.156MPa\;m^{1/2}$. 3. The fatigue life of laminate porcelain showed the constant fracture range at the stress level 27.46-35.30MPa. 4. When a cyclic flexure load was applied, the fatigue life of resin-bonded laminate porcelain was more decreased than that of laminate porcelain. 5. When a thermocycling was conducted, the crack growth rate of resin-bonded laminate porcelain was more increased than that of laminate porcelain. 6. Fracture surface showed the radial crack, the lateral crack, and the macroscopic crack branching region beneath the plastic deformation region when an indentation load of 9.8N was applied.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.6-9
• /
• 2016

The enhancement of mechanical properties of coated conductor (CC) tapes in practical application are usually achieved by reinforcing through lamination or electroplating metal layers on either sides of the CC tape. Mechanical or electromechanical properties of the CC tapes have been largely affected by the lamination structure under various loading modes such as tension, bending or even cyclic. In this study, the influence of brass laminate volume fraction on electromechanical properties of RCE-DR processed Gadolinium-barium-copper-oxide (GdBCO) CC tapes was investigated. The samples used were composed of single-side and both-side laminate of brass layer to the Cu-stabilized CC tape and their $I_c$ behaviors were compared to those of the Cu-stabilized CC tape without external lamination. The stress/strain dependences of $I_c$ in laminated CC tapes under uniaxial tension were analyzed and the irreversible stress/strain limits were determined. As a result, the increase of brass laminate volume fraction initially increased the irreversible strain limit and became gradual. The corresponding irreversible stress limit, however, showed no difference even though the brass laminate volume fraction increased to 3.4. But the irreversible load limit linearly increased with the brass laminate volume fraction.