• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1169-1176
• /
• 2011

액막류는 레이놀즈수 및 유동 안정성에 의해 파동이 없는 층류액막류, 파동을 동반한 층류 액막류 및 난류액막류로 구분된다. 파동액막류는 강한 비선형성에 의해 매우 복잡하여 기존에는 주로 실험적 연구가 진행되었다. 수치적 해석은 주로 파동이 없는 경우에 국한되었으며 여러 가지 자유표면 해석기법을 이용하여 평균액막두께를 예측하였다. 이 연구에서는 층류액막류의 파동현상을 레이놀즈수 20~1000 범위에서 수치해석하였다. 이 때, VOF 자유표면 해석기법에 기반한 여러 가지 수치방법을 비교 연구하였으며 평균액막두께, 파동속도 및 진폭을 실험결과와 비교하였다.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.750-756
• /
• 1985

본 연구에서는 종횡비 0.1이고 상.하 수평경계면이 단열된 직각밀폐용기내에 서 Pr수가 1보다 큰 물(Pr=6.97, 20.deg. C) 및 실리콘 오일(Pr=1086.42, 20.deg. C)의 양단의 온도차에 의한 자연대류에서 아직 충분히 연구되지 않은 코어형상에 주안점을 두고 실 험적으로 관찰, 조사하였으며 그 결과를 Lee의 이론적인 예측과도 비교, 검토해 보았 다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.272-281
• /
• 2007

A numerical simulation on nitrogen gas flow in a long parallel plate microchannel was performed to obtain the effect of compressibility and rarefaction on gaseous flow in microchannels. The simulation was based on steady. two dimensional compressible Navier-Stokes and energy equations with noslip and first order slip boundary conditions. The channel was $1.2{\mu}m$ deep and $3000{\mu}m$ long. The Reynolds numbers were in the range of order from $10^{-2}$ to $10^{-1}$. So the flow was assumed to be laminar. The computations were performed on various pressure ratios. The outlet pressure was fixed to atmospheric pressure. The outlet Knudsen number was 0.0585, consequently the flow was in the slip flow regime. The computations were performed with the assumption of isothermal channel walls. The results were compared with the experimental data. The agreement was good.

• 한국항공우주학회지
• /
• 제45권5호
• /
• pp.367-375
• /
• 2017

본 연구에서는 초음속 영역에서의 해머헤드형 노즈 페어링을 포함하고 있는 발사체 선두부에 대한 RANS 전산해석을 수행하였다. 층류, 완전 난류, 천이 모델을 이용한 2차원 축대칭 해석을 수행하여 실험 결과와 비교하였다. 레이놀즈수의 변화에 따라서 다른 유동현상이 나타남을 확인하였다. 높은 레이놀즈수에서는 경계층이 난류가 되어 발사체 표면에서 박리가 되지 않는다. 낮은 레이놀즈수 조건에서는 해머헤드형 노즈 페어링의 팽창-압축 모서리에서 경계층의 박리와 재부착으로 층류 박리 거품이 만들어진다. 받음각이 있는 3차원 계산에서 층류 박리 거품으로 발생되는 와류 구조를 확인할 수 있었다. 레이놀즈수에 따른 박리 거품을 예측하기 위해서 난류 천이를 고려해야 함을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.376-383
• /
• 2005

In the paper we investigate characteristics of a transitional behavior from a premixed flame to a triple flame in a lifted flame according to the change of equivalence ratio. In previous study, we showed that the stabilized laminar lifted flame regime is categorized by regimes of premixed flame, triple flame and critical flame. A gas-chromatograph is used to measure concentration field, a smoke-wire system is used to measure streak line, and a PIV system is used to measure velocity field in lifted flame. In the visualization experiment of smoke wire, the flow divergence and redirection reappeared in premixed flame as well as triple flame. Thus we cannot express the flame front of lifted flame has a behavior of triple flame with only flow divergence and redirection. In PIV measurement, flow velocity for those three flames has minimum value at the tip of flame front. To differentiate triple flame and premixed flame, $\Phi$ value of partially premixed fraction is employed. The partially premixed fraction $\Phi$ was constant in premixed flame. In critical flame small gradient appears over the whole regime. In triple flame, typical diffusion flame shape is obtained as parabolic distribution type due to diffusion flame trailing.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.189-196
• /
• 2000

A numerical simulation was conducted to analyze the interaction of flame and vortices. The characteristic scales of flame and vortices were limited in the thin laminar flamelet regime. Within this regime, flame is assumed as discontinuity surface and its motion in flow field was described by G-equation instead of full governing equations. Additional approximations include distribution of line volume sources on flame surface to simulate effect of volume expansion. Contrast to previous calculations, current study employed vortex transport equation to evaluate attenuation and smearing of vortices. Two extreme conditions of frozen vortex and frozen flame were considered to validate the current method. Comparison with direct numerical simulation resulted in satisfactory quantitative agreement with higher computational efficiency which warrants the usefulness of the present model in more complex situation.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1869-1879
• /
• 2004

The present study has numerically investigated two-dimensional flow over three circular cylinders in an equidistant side-by-side arrangement at a low Reynolds number. For the study, numerical simulations are performed, using the immersed boundary method, in the range of g* < 5 at Re= 100, where g* is the spacing between two adjacent cylinder surfaces divided by the cylinder diameter. Results show that the flow characteristics significantly depend on the gap spacing and a total of five kinds of wake patterns are observed over the range: modulation-synchronized (g* (equation omitted) 2), inphase-synchronized (g* (equation omitted) 1.5) , flip-flopping (0.3 < g* (equation omitted) 1.2) , deflected (g* (equation omitted) 0.3), and single bluff-body patterns (g* < 0.3). Moreover, the parallel and symmetric modes are also observed depending on g* in the regime of the flip-flopping pattern. The corresponding flow fields and statistics are presented to verify the observations.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.1-9
• /
• 1996

This study investigated torque characteristics for Couette flow experimentally under circumstaces that ferrofluids were between two coaxial spheres. Torque measurement was obtained for the situation where the inner sphere was rotating while the outer sphere was kept stationary. The magnetic field was imposed on the fluid, using a bar magnet which was inserted in the inner sphere. In the laminar flow region the torque increase when the magnetic field is applied and the critical Reynolds number is increased. However, in the transition regime, the effect of the magnetic field on the torque characteristics decrease as Reynolds number increases. The value of torque were the same as those of glycerine solution beyond the cirtical Reynolds number. We also made experimental equation which could obtain coefficient of torque within critical Reynolds number in terms of sphere spacing Reynolds number and magnetic properties of ferrofluid.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.159-165
• /
• 2003

Self-excited noise generation from laminar flames in thin annular jets of methane/air premixture has been investigated experimentally. Various flames were observed in this flow configuration, including conical shape flames, ring shape flames, steady crown shape flames, and oscillating crown shape flames. Self-excited noise with the total sound pressure level of about 70dB was generated from the oscillating crown shape flames for the equivalence ratio larger than 0.95. Sound pressure and $CH^{\ast}$ chemiluminescence were measured by using a microphone and a photomultiplier tube. The frequency of generated noise was measured as functions of equivalence ratio and premixture velocity. A frequency doubling phenomena have also been observed. The measured $CH^{\ast}$ chemiluminescence data were analyzed from which the corresponding sound pressure has been calculated. By comparing the data with those of measured ones, the noise source can be attributed to the flame front fluctuation near the edge of the oscillating crown-shape flames. The flame stability regime was influenced sensitively to the supplying air through the inner tube.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.30-37
• /
• 2012

Effect of rib heights is found as significant parameter to enhance convective heat transfer performance under laminar and low turbulent regime. Circular ribs with different ribheight to channel height ratios, e/H = 0.05, 0.1, 0.15, are fabricated over the copper substrate respectively in a rectangular duct having 7.5 cross sectional aspect ratio. Only one rib pitch to rib height ratio (P/e = 10) has been chosen for all different height ribs. The result shows that the arithmetic average of turbulence intensity decreases with decreasing roughness height calculated between two ribs under laminar and low turbulent region. It occurs because the area of recirculation and reattachment zone also decreases with decreasing rib height. Optimum thermal enhancement factor is derived by 0.1 rib height to channel height ratio under low turbulent region but 0.15 rib height to channel height ratio gives maximum subjected to laminar flow.