• The Korean Journal of Community Living Science
• /
• v.24 no.2
• /
• pp.243-249
• /
• 2013

Identification of coating film species from ancient coating materials is needed to maintaine their surfaces without loss of their original beauty for a long time and understand the historical background of manufacturing techniques. A pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was applied to identify the origine of films in ancient coating materials. The pyrolysis products, which reflect the source from which they originate were detected distinctively at $500^{\circ}C$. This is a rapid technique that does not require large amounts of sample or any sample preparation. Sesquiterpenes are a class of terpenes that consist of three isoprene units were identified as cadienes, selinenes, cubebenes from the raw material of dendropanax morbifera. On the other hand, alkanes(tetra~heptadecanes), alkenes (tri~heptadecenes), allkyphenols, catechols and fatty acids were detected from the raw material of the lacquer film. Based on these results, the origine of historic coatings artifacts was identified using py-GC/MS by comparison with their pyrolysis products.

• The monthly packaging world
• /
• s.339
• /
• pp.68-72
• /
• 2021

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.81-90
• /
• 2003

In this study, we investigated the weathering properties of Korean Rhus lacquers containing tung oil and their potential use as exterior coatings. The finished lacquers were prepared with a raw Korean Rhus lacquer or refined Korean Rhus lacquer content of 10, 20, 30 and 40 wt.% (corresponding to ratios of 10/90, 20/80, 30/70 and 40/60 by weight of Korean Rhus lacquer/tung oil, respectively). The curing temperature of the prepared lacquer increased with increasing the content of the raw Korean Rhus lacquer. This increased curing temperature is related to higher proportion of hydroxyl groups in the prepared lacquer, due to the content of the raw Korean Rhus lacquer. In accelerated weathering testing, the changes in the gloss and contact angle of the prepared lacquers showed a similar trend to that of traditional exterior oil stain. In addition, the prepared lacquers containing tung oil showed greater discoloration than traditional exterior oil stain. However, the discoloration of the prepared lacquer with a raw Korean Rhus lacquer content of 40 wt.%, and that of the prepared lacquer with refined Korean Rhus lacquer contents of 30 wt.% and 40 wt.%, showed a similar trend to that of traditional exterior oil stain. Consequentially, these prepared lacquers showed a potential for being used as exterior coatings.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.7
• /
• pp.715-719
• /
• 1997

In order to study the dielectric properties of the oriental lacquer films, three different films have been prepared differing purification and curing procedures. Dielectric properties were measured in the frequency range of 1 Hz to 105 Hz at various temperatures between - 50 ℃ and 150 ℃. The DEA using 1 Hz showed that glass transition and secondary relaxation temperatures of oriental lacquer film are very time dependent. In addition, the frequency-independent negative peak between 25 ℃ and 45 ℃ was observed, which could represent the formation of crosslink by laccase enzyme during heating. On the contrary, the high temperature cured film showed a hardly noticeable negative peak at the temperature range. The relationship between thermodynamic properties and chemical structures has been discussed based on the analysis of the dielectric relaxation behavior using the Cole-Cole plot and the dielectric relaxation intensity.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.19-23
• /
• 1999

Bisphenol-A and related conpounds recently have been reported to be estrogenic since it has been demonstrared in laboratory stuides that they mimic the effects of estrogen. Bisphenol-A refered to as "environmental estrogen" are suspected of causing health effect in living body through disruption of endocdrine system. In this review, the occurrence, environmental fate, and biological effects of bisphenol-A are presented. To provide understanding to the potential for endocrine disruption due to environmental estrogen, the physiology of bisphenol-A mammalian and fish is also reviewed. For empty can, the migrationof bisphenol-A form food conducted epoxy coating was effected by the test conditions and it increased in order to water and 4% acetic acid. Extracts from foods packed in lacquer coated can also showed estrogenic activity. Bisphenol-A was found as a contaminant not only in the liquid food cans, but also in water autoclave in can. The used of coating certain food-packaging material may require closer scrutiny to determine when bisphenol-A contribute to advert exposure of consumers to estrogenic xenobiotics. Human breast cancer MCF cell added bisphenol-A cultivated to study the ability of bisphenol-A to elicit of bisphenol-A estrogenic bioresponse in this system. Bisphenol-A, similar to estradiol, induced PR activation in transiently transfected anterior and posterior pituitary cells.

• Conservation Science in Museum
• /
• v.4
• /
• pp.79-88
• /
• 2003

The lacquer ware objects of Nangnang were treated for conservation and seven of them were studied on the manufacturing technic. When we examined them using microscopes and an SEM-EDS analysis, the lacquer layer was proved to consist of two parts: the ground and the upper lacquer. The ground coating was made of several mixed materials such as powdered bone and minerals. Many forms of powdered bone were observed. We could find out that HgS, PbO and AgS were used as pigments. We could also find out a specific process and materials were used for those objects, although we could not say definitely what they were because the number of the sample was not big enough.

• Analytical Science and Technology
• /
• v.31 no.2
• /
• pp.78-87
• /
• 2018

Asian lacquer has been used as an adhesive and coating material in Asian countries, such as China, Japan, and Korea, and other southeast Asian countries. In this study, the changes in the chemical structure of lacquer with drying was analyzed using pyrolysis/GC/MS (which is useful in analyzing polymeric material) to understand its drying procedures. Upon increasing temperature, the dried lacquer was fully pyrolyzed above the pyrolysis temperature of $500^{\circ}C$. The repeatability was good at the pyrolysis temperature of $500^{\circ}C$ (rsd = 2.6-22.3 %); however, there were differences in the pyrogram patterns when the difference in sample quantity was large. The characteristic peaks of Asian lacquer components, such as those corresponding to 1,2-benzenediol and 3-methyl-1,2-benzenediol, were detected and the compound of each peak was assigned according to the mass library. As the lacquer dried, the composition of pyrolysis products with urushiol derivatives bearing 3 C=C bonds was severely reduced compared with the ones with no C=C bonds, indicating that the polymerization is related to C=C bonds. These results can be applied to confirm the presence of lacquer in excavated relics and to monitor the changes in the composition of raw lacquer with drying.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.79-87
• /
• 2007

This study investigated the effects of lacquer-finishing to prevent discoloration of coloring chestnut wood coated with natural dyes from deteriorating factors such as lights (indoor, 500 lux and outdoor, 50,000~70,000 lux), acid, alkali, and heat through measurement of color difference. Lacquer-finishing coating contributed to protection of intrinsic color of the natural dyeing woods in spite of severe treatment. In particular, dyeing liquor with alkali pH played a great role in prevention of light discoloration.

• Laser Solutions
• /
• v.16 no.4
• /
• pp.12-16
• /
• 2013

For mass production of electronic devices, the processing of the printing roll is one of the most important key technologies for printed electronics technology. A roll of printing process, the gravure printing that is used to print the electronic device is most often used. The indirect laser processing has been used in order to produce printing roll for gravure printing. It consists of the following processing that is coating of photo polymer or black lacquer on the surface of printing roll, pattering using a laser beam and etching process. In this study, we have carried out study on the coating and etching for $25{\mu}m$ line width on the printing roll. To do this goals, a $4{\mu}m$ coating thickness and 20% average coating thickness of the coating homogeneity of variance is performed. The factors to determine the thickness and homogeneity are a viscosity of coating solution, the liquid injection, the number of injection, feed rate, rotational speed, and the like. After the laser patterning, a line width of $25{\mu}m$ or less was confirmed to be processed through etching and the chromium plating process.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.549-556
• /
• 2018

In November 2011, various artifacts were excavated from the No. 8 stone-lined tomb in Suchon-ri, Gongju by the Chungnam Institute of History and Culture. These included artifacts with lacquered mainframe and silvery metal ornament. These were recovered together with soil and underwent conservation treatment. In this paper, we discuss the scientific analysis and conservation treatment of the lacquered artifacts excavated from the Suchon-ri site. Among our findings is that the artifacts have three layers of lacquer coating and the metal parts are primarily composed of Ag. As the artifacts were recovered with soil from the site, the soil was removed from underneath and inside the artifacts. The inside of the lacquerware was reinforced with rayon paper using 3% funori, and the metal was treated with acrylic resin after removing the acrylic resin previously used to recover the artifact, followed by cleaning. The metal was also internally reinforced with gauze. Finally, the interior reinforcement was made using PVA and resin in pulp and attached with funori to preserve the shape of the lacquerware, and the exposed rayon was finished with acrylic paint. The main advantages of this study are its review of conservation treatment strategies for lacquer artifacts whose numbers have recently increased, and the application of new conservation treatment methods.