• 산업경영시스템학회지
• /
• 제18권33호
• /
• pp.161-171
• /
• 1995

When physical distribution cost can be correctly measured, its management can also be efficient. Thus the primary objective of the study is to develop systems for measuring correctly physical distribution cost. The systems have two aspects : the One is the consumption of the resourses(materials, labor service, the other services), the other is the creation of physical distribution services(transportation, storage, cargo, packing, distribution conversion, management). By measuring the cost through the systems, the commoditization of the physical distribution services is possible and measurement of the cost and revenue can also be reasonable ,which makes its management efficient.

• 기술사
• /
• 제14권2호
• /
• pp.5-11
• /
• 1981

This analysis has been conducted for 8 chemical plants built in Korea during 1975-1976 and the results have been compared with those in U.S.A. observed by Kenneth M. Guthrie. Equipment and materials supplied by domestic makers are limited in activity field and occupy only 12% of all equipment and material cost. However, unit costs of most materials supplied by home such as cement, steel, cables and carbon steel pipes, etc. being relatively cheaper than those of abroad, their effects on material-to-equipment ratios are apparent. There is a deep difference in labor wage rates between Korea and U.S.A. as much as 16 times. However, the labor productivity observed in these model projects is in the range of 1.1-1.4 to the Gulf Coast, U.S.A. during the same period. And this low wage rate and relatively high productivity have the greatest influence on deviation of Korean cost structure from that of U.S.A. In these model projects, engineering and construction management was conducted by foreign contractors (mostly U.S.A.), and the resulting project indirect cost amounts to 7.5 times as high as most cases executed by Korean contractors alone. Weighted percentage of each component and L/M-ratio by activities of direct field cost derived from this analysis are shown in detail in Tables 2 and 5 to provide a basis for futher study and comparison.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.54-64
• /
• 2002

This study evaluated advanced water treatment (AWT) system in Korea. There are currently 16 plants operating with AWT. However, no attempt has been made to evaluate AWT system. This study selected one water treatment plant with AWT (pre-ozonation ＋ BAC). Using the operation data from 1995 to 2001 and pilot study results, the post-evaluation of the AWT system has been conducted. The study found that AWT improved water qualities of organic, ammonia, and turbidity, as expected. However, the extent of the improvement was generally short of the pilot study expectations. Pre-ozonation failed to decrease coagulant consumption. The dosage increased rather than decreased. AWT was, however, successful to decrease chlorine consumption. The chlorine reduction was related to the change in raw water characteristics and AWT introduction. Pre-ozonation failed to decrease coagulant consumption. The dosage increased rather than decreased. AWT was, however, successful to decrease chlorine consumption. The chlorine reduction was related to the change in raw water characteristics and AWT introduction, Both operation of pre-ozonation and reduced ammonia loading were responsible for the reduction. AWT increased the operation cost. Maintenance, raw water, and power cost increased, while labor and chemical cost decreased. Manpower reduction resulting form automation caused the decrease of labor cost. The reduction of chlorine consumption caused the decrease of chemical cost.

• 자원ㆍ환경경제연구
• /
• 제19권3호
• /
• pp.633-658
• /
• 2010

본 연구에서는 1970년~2005년 기간 동안 한국 제조업의 Translog 비용함수를 분석함에 있어, 비제약 모형과 사전적으로 오목성을 부과한 제약 모형을 추정하여 그 결과를 비교하였다. 제약 모형은 비제약 모형에 비해 다소 낮은 로그우도값에 불구하고, 전 자료 구간에 대하여 정규성을 만족하여 비용함수와 생산기술 간의 쌍대성을 만족하는 추정 결과가 도출되었다. 제약 모형의 가격탄력성 분석 결과, 전력과 자본 사이에는 보완성이 존재하여 자본 수요가 증가함에 따라 전력 수요가 증가하는 것으로 나타났다. 한편 전력 수요는 노동, 연료 및 재료 수요를 모두 대체하는 방향성이 관측되어 한국 제조업이 전력 사용이 증가하는 방향으로의 구조변화를 경험하고 있는 것으로 분석되었다.

• 보건행정학회지
• /
• 제29권1호
• /
• pp.27-39
• /
• 2019

Background: This study is designed to estimate the factors that affect the level of three different performance (publicity, efficiency, profitability) among regional public hospitals. Methods: The units of analysis are the regional 30 hospitals, which have the operating data during 22 years (from 1933 to 2014). The research method is used by fixed panel analysis. The publicity is measured by medicaid outpatient proportion and medicaid inpatient proportion. The efficiency is measured by two types of efficient score by DEA (data envelopment analysis). The profitability is measured by medical income to medical revenue and ROA (return on total asset). Results: At first, the increase of bed gives negative affect to the publicity but give positive effect to the efficiency and profitability. Because it means the increase of the region population, it gives more profitability compare to hospital with small number of beds. The more the operating period is the higher effect to the publicity and efficiency because of it's refutation. The debt ratio gives negative effect to publicity, but positive effect to profitability. It is the normal belief that there is inverse relationship between publicity and profitability. The turnover rate of bed gives the negative affect to the publicity, but positive affect to the efficiency and profitability. That give us the implication that type of the inpatient make different effect the hospital performance. The ratio of labor cost give negative effect to all kind of performance. That means that the higher labor cost don't mean the higher publicity and labor cost control is very important factors to hospital performance. So the region hospital have to focus the labor factors more to make higher performance. Conclusion: As the conclusion, the independent variables give similar effect to the efficiency and the profitability, but give inverse effect to the publicity. That means that if an region hospital want to make the more publicity, it loss the higher efficiency and profitability. Specially publicity is higher negative relation with the profitability.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.129-136
• /
• 2004

High fluidity concrete(HFC) requires high dosage of superplasticizer to acquire sufficient fluidity, and high contents of fine powder and viscosity enhancing admixtures to resist segregation. The use of high amount of admixtures to make HFC at batcher plant in ready mixed concrete company is one of the reasons to raise the manufacturing cost of HFC. For this reason, new type of manufacturing method of HFC are described using both flowing concrete method and segregation reducing superplasticizer(SRS) in order to gain economical profit and offer the convenience for quality control.. As dosage of melamine based superplasticizer increases, it shows that fluidity and bleeding increase, while air contents and ratio of segregation resistance decrease. It also shows that addition of viscosity agent into superplasticizer reduce bleeding and improve segregation resistance of concrete. Dosage of AE agent into superplasticizer containing viscosity agent recovers loss of air contents during flowing procedure. Combination of proper contents of superplasticizer, viscosity agent and AE agent make possible to develope segregation reducing type superplasticizer. Compressive strength of high fluidity concrete applying flowing method with it is higher than that of base concrete. No differences of compressive strength between compacting methods are found. For the estimation of construction cost of high fluidity concreting using segregation reducing type superplasicizer, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer cost, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• 한국건설관리학회논문집
• /
• 제12권3호
• /
• pp.101-111
• /
• 2011

건설기술관리법에 의하여 발주자는 수급자에게 품질관리비용을 계상하여야 한다. 품질관리비용은 건설현장에서의 수급자가 품질확보를 위하여 수행하는 품질관리활동에 소요되는 비용을 말하며, 안전관리비, 환경보전비와 같이 별도의 항목으로 계상하도록 정하고 있다. 그러나 품질확보를 위한 업무는 수급자의 의무사항이며, 공사비에는 품질관리비용이 이미 포함되어 있으므로 중복 계상할 수 없다는 발주자의 입장과 품질시험관리인의 인건비는 간접노무비에 포함되어 있다는 회계예규의 조항 등으로 인하여 품질관리비용이 아직 현실화되지 못하고 있다. 과거 수차례에 걸쳐 조사한 결과에 의하면 총공사비의 약 0.2%가 품질관리비용으로 계상되고 있는 바, 이 비용 규모는 현실적이지 못하다는 수급자의 주장을 고려하여 품질관리비용의 정의 및 내용에 대하여 관련자료를 토대로 고찰하고 품질관리비용 현실화와 관련된 제반 문제점을 제시함으로써 품질관리비용 현실화의 토대를 제공하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.141-147
• /
• 2005

Usually, processing whole project or a part of frame work delays due to acceleration, changing orders, management, characters of project. overtime, worker crowding, early occupation in the field of construction. Through a whole project, these factors cause decreasing construction labor-productivity which is the most dependent in business of construction. These kind of decreasing of construction labor-productivity cause many negative effects, just as extension of time, increasing cost in project of construction. Regardless of characters of construction or decreasing labor-productivity, extension of time is a incident which needs acceleration, also it cause a high possibility of claim and dispute. The productivity has just a broad meaning in business of construction. That's why it's difficult to apply in the field of construction. Especially, factors increasing or decreasing labor-productivity is defined by analysis of working as qualitative and outlined evaluation. However, study of the each factor decreasing construction labor-productivity analysis has not researched, because of difficulty of systematic measurement and management. The existed studies about management of productivity are just focused on estimation of productivity, not on evaluation of productivity. It was true that I couldn't examine clearly about the analysis of how much important per each the factor which have influence on labor-productivity because of the characteristic as qualitative that the labor productivity have On this study, i tried to get the factors decreasing of labor- productivity with gathering opinions of panels of expert's studies about the factors decreasing of labor-productivity on project of construction through Delphi method and i evaluated the result factors as quantitatively and subjectively about importance of factors decreasing construction labor-productivity Analysis, using AHP Method by Saaty. Also, using Delphi and AHP method, 1 suggest substantiated method qualitative factors are measured by quantitative criteria.

• 한국측량학회지
• /
• 제38권3호
• /
• pp.211-222
• /
• 2020

본 연구는 국토지리정보원이 운영하고 있는 측량대가 산정체계인 「측량대가의 기준」의 개선 방안을 도출하는 것을 목적으로 한다. 현행 측량대가기준은 최초 제정 이후 크게 개정되지 않았으나 측량산업이 어려워지는 상황에서 대가기준의 현실화는 기술자 양성과 산업 발전을 위해 절실히 필요한 과제이다. 본 연구에서는 측량대가기준의 문제점 분석 및 개선방안 도출을 위해, 측량대가기준의 개요와 기본적인 특성 및 연혁을 분석하고 국내 유사 기준과 비교하였다. 설문 조사를 통해 관·산의 의견을 수렴하고 노임단가와 간접비 요율에 대한 검증을 수행하였다. 그 결론은 다음과 같다. 첫째, 직접비에 직접적인 영향을 주는 표준품셈의 정비가 필요하며 직접경비에 누락된 항목의 보완이 필요하다. 둘째, 외국의 대가기준 및 지적 분야와의 대가기준을 비교해 볼 때, 측량 분야의 노임단가가 상당히 낮은 수준이므로 이에 대한 개선이 필요하다. 셋째, 간접비의 요율은 적절한 것으로 분석되었으며, 간접비가 적절히 계상되지 않는 문제에 대해서는 교육·홍보의 강화를 통해 대응하여야 한다. 넷째, 신기술에 빠르게 대응하기 위해 측량용역대가 심의위원회의 운영 또는 표준시장단가체계 도입에 대한 검토가 필요하다.