• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• Environmental and Resource Economics Review
• /
• v.18 no.3
• /
• pp.523-544
• /
• 2009

The purpose of this paper is to estimate the impact of foreign direct investment on environmental performance for 27 OECD countries using endogenous environmental policy model. The empirical test shows that with 1% increase in the ratio of inflow stock of foreign direct investment over domestic capital stock, emission on NOx and $CO_2$ will increase by 0.0071%(NOx) and 0.0165%($CO_2$) and 1% increase in the ratio of foreign capital stock induces 0.044%(fixed effect) and 0.047%(random effect) of economic growth. 1% increase of per labor total output increases 2.038%(fixed effect) or 1.890%(random effect) in reinforcement of environmental regulation. However, we could not confirm the Porter's hypothesis that the more strong environmental regulation leads technical innovation. The scale effects (0.0119, 0.0172) are estimated higher than the technical effects (-0.0048, -0.0007) in two pollutants (NOx, $CO_2$). It implies that each country needs to increase pollution abatement and control expenditure more aggressively to protect environment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.556-565
• /
• 2014

Objectives: This study is aimed at inquiring into the grasp of real condition of working environment and improvements by calculating the hypertension distribution consequent on job stress risk and exposure level of alleviating factors. In addition, this study is intending to estimate the hypertension distribution through socio-demographic factors and level of stressors occurring at working environment, such as high workload, low control, low support, job insecurity, long working hours, low income. Methods: This study estimated the hypertension distribution using the tertiary Korean Working Conditions Survey data, and conducted comparative analysis according to the category of individual questionnaire items using odds ratio. Result: As a result of study, it was found that in the event that working environment satisfaction is low and business & an immediate superior's attitudes are negative, the hypertension distribution was high. Particularly, it was found that physical risk factor musculoskeletal risk factor, and mental risk factor in a workplace were all increasing the hypertension distribution. Conclusions: With the aged workers' labor market participation ratio increasing, hypertension could be a major issue in the field of Occupational Safety and Health. Thus, it's necessary that the relevant employer should lower the hypertension distribution through creation of pleasant working environment and inducement of workers to improve in the relations with their superiors. As for the uppermost limit of this study, there is a limit to clarifying the mechanism of hypertension through multivariate statistics analysis because it's difficult to establish causal relationship by individual questionnaire item as the working conditions survey is made by cross-sectional study. In the follow-up research, this study is going to do research on the mechanism of hypertension through questionnaire supplementation and in-depth analysis.

• Korean Journal of Agricultural Science
• /
• v.45 no.1
• /
• pp.120-127
• /
• 2018

The rural labor force has gradually been decreasing due to the decrement of the farm population and the increment of the aging population. To solve these problems, it is necessary to develop and study autonomous agricultural machinery. Therefore, analyzing the dynamic behavior of vehicles in an autonomous agricultural environment is important. Until now, most studies on agricultural machinery, especially on ground vehicle dynamics, have been done by field tests. However, these field test methods are time consuming and costly with seasonal restrictions. A research method that can replace existing field test methods by using simulations is needed. In this study, we did basic research analyzing the effect of the travelling speed of a tractor on tire slip using simulation software. A tractor simulation model was developed based on field conditions following a straight path. The simulation was done for three ranges of speed: 20 - 30 km/h (considered the normal travelling speed range), 6 - 8 km/h (considered the plow tillage speed range) and 2 - 4 km/h (considered the rotary tillage speed range). The results of the simulation show that the slip ratio and slip angle values tended to increase as the traveling speed range of the tractor decreased. From the simulation results, it can be concluded that at low tractor speeds, it becomes more difficult to control the vehicle path. In future research, simulations will be done with various work environments such as a curved path as well as with various friction coefficient conditions, and the simulation results will be experimentally verified by applying them to an agricultural tractor.

• Journal of Korean Academy of Nursing
• /
• v.42 no.3
• /
• pp.351-360
• /
• 2012

Purpose: The purpose of this study was to propose optimal hospitalization fees for nurse staffing levels and to improve the current nursing fee policy. Methods: A break-even analysis was used to evaluate the impact of a nursing fee policy on hospital's financial performance. Variables considered included the number of beds, bed occupancy rate, annual total patient days, hospitalization fees for nurse staffing levels, the initial annual nurses' salary, and the ratio of overhead costs to nursing labor costs. Data were collected as secondary data from annual reports of the Hospital Nursing Association and national health insurance. Results: The hospitalization fees according to nurse staffing levels in general hospitals are required to sustain or decrease in grades 1, 2, 3, 4, and 7, and increase in grades 5 and 6. It is suggested that the range between grade 2 and 3 be sustained at the current level, the range between grade 4 and 5 be widen or merged into one, and the range between grade 6 and 7 be divided into several grades. Conclusion: Readjusting hospitalization fees for nurse staffing level will improve nurse-patient ratio and enhance the quality of nursing care in hospitals. Follow-up studies including tertiary hospitals and small hospitals are recommended.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.213-230
• /
• 2002

The meaning of foodservice industry is various but especially its most important one contains a service industry. And so, foodservice industry should provide very impressive service to customers. if workers don't satisfy themselves at the works, they can not give a high qualifying service to the customers. Therefore, this study showed how the worker's satisfactory degree depending on working type effects on the growth of foodservice industry. The conclusions by questionnaires to workers who have worked as both a regular and a contract employment at Special First Degree Hotels in Seoul are followings. Very interestingly, the proportion of satisfying degree for the workers as regular is 34.94% but the degree for workers as contract is 36.8%. The reason is that the average age of regular workers is high and they have their family to support and they have changed their job more often than the others. They can express their problems through a labor union but the part of solution is very small. It must cause to decrease satisfying degree. The workers generally satisfied to their senior employers. It means that the negative image of higher-ups in the past has been changed. It is a serious problem that the proportion of satisfaction degree remains 30%. The managements must perceive the fact that the increase ratio of contract workers does not make low quality of service. They should know that the satisfaction degree of regular workers is lower than contract ones. In order to increase the satisfaction degree, if the managements can find out the way of taking over their authority and giving a motive, they can reduce the ratio of occupation change and nonattendance. And also they can promote the productivity in foodservice industry and in conclusion, the foodservice industry will have glowed very successfully in the near future.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.59-68
• /
• 2002

Using 1996 annual observations for 69 bus firms in Seoul, this paper measures firm-level efficiency with data envelopment analysis(DEA) and identifies firm characteristics indicative of differential efficiency in these firms with Tobit regression analysis. The paper then conceptualizes that these firms produce two kinds of output(city/seat bus kilometers or city/seat bus Passengers) using four inputs (labor vehicle, fuel and maintenance). The findings show that, on an average, these firms have only a little input saving potential of 0.9 percent, while not a little output increasing potential of 12.9 percent. On the other hand, it is discovered that these firms operate more efficiently with a lower ratio of maintenance employees to total employees. Furthermore, it appears that both the ratio of seat buses to total buses and average speeds positively affect efficiency in this industry.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.411-419
• /
• 2009

This study was carried out to develop a shredding-burying machine for application of gramineae green manure crops that were tall and had high biomass yield such as sudan grass and rye. We made a prototype to operate both shredding and burying concurrently to attach at middle-sized tractors. Field tests were performed with the prototype to treat rye and sudan grass. The test results showed that the average cutting length became shorter and the quantity of entwined stem became obviously decreased when the PTO shaft speed was fast and running speed was slow. Also, We found, when the cut stem length became shorter, the burying ratio became more increasing and the PTO power requirement became more decreasing. Working efficiency of the prototype was better than conventional Rotary. The test results for treating rye/sudan grass with prototype showed that average cutting length was 21.2/22.5 cm and burying ratio was 98.4/98.1% when the PTO shaft speed was 1,000/1,000 rpm and running speed was 0.25/0.17 m/s. Also, the working performance of the prototype was 0.79 and 1.14 h/10 a for rye and sudan grass, respectively. Finally, we found that the prototype of shredding-burying machine was better for labor than conventional method that required at least 3 times bigger tractor.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.4
• /
• pp.31-38
• /
• 2020

Purpose: At a time when the distribution industry is dominated by capital and technology, win-win growth among businesses groups (BGs) in wholesale market is becoming a social issue. Therefore, through analysis of market growth, market concentration (MC) and market power (MP), we want to identify the structure of the wholesale market and the competitiveness of the BGs in terms of market share (MS), sales-profit ratio (SPR), and labor productivity (LP) to explore the possibility of win-win growth. Market situation: Wholesale and Retail sales ratio (W/S) continues to increase, which also means inefficiency in distribution channels or opportunities in wholesale markets. Wholesale sales have grown 8.3 percent annually over the past 15 years, while the number of companies and workers has declined since 2017, which is why some restructuring is believed to begin in the wholesale industry. In terms of MC and MP, the growth potential of SBG can be found in FCB, ARM, FBT and CME BTs. Methodology and data: Through ANOVA and Regression Analysis, the 2015 Economic Census Data of KOSTAT was analyzed. Results: The results of ANOVA show that statistically significant SBG has a larger MS than LBG. The SPR was not different among BGs. LP is higher for LBG than for other BGs. Regression results show that the employment weight (EW) and the company size (SC) have positive effects on the MS, but the company weight (CW) and employment size (SE) have negative effects. In the case of SPR, the CW is positive and the EW is negative. In addition, LP appears to be more positive as SC in the BGs is larger. Conclusions: Although there is sufficient potential for SBG in the wholesale market, there is a problem that needs to increase LP. Therefore, the SBG needs to restructure in terms of number of companies and SC to improve the efficiency of employment. In terms of MC and MP, the SBG looks for possibilities in FCB, ARM, FBT and CME BTs. In addition, SBG that seeks higher returns with human services rather than simple sales is found to be competitive in the HHG, MES and CME BTs.

• Journal of Periodontal and Implant Science
• /
• v.44 no.2
• /
• pp.85-93
• /
• 2014

Purpose: Low birth weight (LBW) is one of the major public health problems in India. Hence, there is a need to identify risk factors that, when modified, will reduce the burden of unhealthy children on the healthcare system. The objective of this study was to determine whether periodontitis among mothers in the rural population of India is a risk factor for LBW babies. Methods: A hospital-based case control study was conducted among 340 postpartum mothers. The cases consisted of 170 women who had given birth to babies weighing <2,500 g, while the control group consisted of 170 women who had given birth to babies weighing ${\geq}2,500g$. Details of the mothers were taken from the hospital records and through a personal interview, and a full-mouth periodontal examination was performed postpartum, which included probing depth, clinical attachment level, and bleeding on probing on six sites per tooth. Results: LBW cases had a significantly worse periodontal status than the controls, having an odds ratio (OR) of 2.94 (P=0.01). The multivariate logistic regression model demonstrated that periodontal disease is a significant independent risk factor with an adjusted odds ratio (aOR) of 2.85 for the LBW group (95% confidence interval [CI], 1.62-5.5). Other factors showing significant associations with LBW were pre-eclampsia (aOR, 4.49; 95% CI, 1.4-14.7), preterm labor (aOR, 5.5; 95% CI, 3.2-9.9), and vaginal type of delivery (aOR, 2.74; 95% CI, 1.4-5.2). Conclusions: Periodontitis represents a strong, independent, and clinically significant risk factor for LBW. Periodontal therapy should form a part of the antenatal preventive care among rural women in India.