• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.231-237
• /
• 2016

The purpose of this study is to analyze phosphate adsorption characteristic of the filter media applied in water purification technology. And it is also to observe the removal efficiency of the technology that was developed by combining the purification abilities of filter media and the vegetation mat. The filter media, Adphos, is the subject of this study. The result of adsorption test shows that $PO_4{^{3-}-P}$ adsorption characteristics of Adphos is determined by the Langmuir isotherm model fitting and the $q_m$ (maximum adsorption amount) value is calculated as 1.162 mg/g. To verify the removal efficiency of the purification technology, a lab-scale reactor, including a 400 mm depth of filter bed filled by Adphos, was manufactured. Yellow flag Iris (Iris pseudacours L.) was planted on the vegetation bed and the coir-roll was used to fix the root of vegetation. The reactor ran 8 hours per day over 71 days, and the results of filtration experiment show that average removal efficiency of SS, T-N and T-P were calculated as 94%, 41% and 64% respectively. With these results, it was proved that the purification technology is highly effective. And for the long-time use, a maintenance guide is also required.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.129-136
• /
• 2020

For effective treatment of wastewater containing ammonium nitrogen (NH₄-N), AT2, AT9, and AT12 strains, having high total organic carbon (TOC) removal capability, and FN47, possessing excellent ammonia nitrogen removal capability present in the activated sludge in the aeration tank of food wastewater treatment plants, were isolated and identified. The cells of these isolated strains were used for microbial augmentation with FIW-1 in the defatted rice bran as a medium to treat industrial wastewater. The investigation of the cultural characteristics of these isolated strains in the aeration tank showed that the affinities for substrate of the isolated strains were extremely high, of which AT12 (Alcaligenes sp. AT12) was the highest among the isolated strains. Ammonium nitrogen removal efficiency in the food wastewater was 71% in the isolated strain FN47 (Microbacterium sp. FN47) treatment group. When only activated sludge was added in the lab scale pilot using food wastewater during continuous culture experiment, the TOC removal efficiency was 63%. Meanwhile, the removal efficiency of 92% was obtained when the microbial augmentation FIW-1 for wastewater treatment was applied. In addition, the chemical oxygen demand (COD) level from the effluent wherein microbial augmentation FIW-1 was input for the initial three days in the wastewater treatment site experiment showed a treatment rate of about 43%, which was increased to 62% after an elapse of 5 days.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.109-122
• /
• 2002

The purpose of this investigation is to evaluate the effects of the Nuegra on enhancement of the masculine and physical activities in general through measuring changes of the testosterone, FSH and subjective symptoms like fatigue, insomnia, urinary stream, muscular weakness, libido and erectile dysfunction. Total 168 male subjects were enrolled from 12 urology, internal medicine clinics and general practitioner, During the 6-week investigational period, 2 capsules of Nuegra were given to the subjects right after meal for 4 weeks, and 1 capsule of Nuegra was added each time in subjects with no or minimal effect. Testoster-one and FSH levels were measured at first visit and last visit, for evaluating masculine activities. To avoid bias and standardize the test results, only one clinic was assigned as a central lab, and all blood samples were transferred. General information and subjective symptoms were evaluated at first visit and at 2 weeks interval, week 2, 4 and 6 using VAS (Visual Analogue Scale). The mean age of the subjects were 51.8${\pm}$8.2 years old (range: 36.1-82.1). Based on the subjects who were tested on testosterone and FSH levels at day l and week 6, the means were 4.4${\pm}$1.4 nmol/L (range: 2.6-7.7), 8.6${\pm}$9.6 mIU/mL (range: 0.3-40.4), respectively at day 1. At week 6, the results were 4.9 ${\pm}$1.6 (2.6-8.9 range), 9.4${\pm}$13.1 (1.0-53.9 range), respectively. Marginally significant difference between pre-dose and post-dose was present. Statistically significant differences were revealed in general assessment for subjective symptoms, fatigue, insomnia, erectile dysfunction, etc. In fatigue, response rates were 39.6, 65.4 and 76.4% at week 2, 4 and 6, respectively (P < 0.0001). Response vates for erectile dysfunction were 13.4, 41.2 and 72.7% at week 2, 4, and 6 (P < 0.0001), respectively, Response rates for libido were 13.6, 51.6 and 73.5% at week 2, 4, and 6 (P < 0.0001), respectively. For urinary stream response rates were 26.9, 44.7 and 66.8% at week 2, 4, and 6 (P < 0.0001), respectively. VAS for muscular weakness did not show significant results that response rates were 40, 60 and 80% at week 2, 4, and 6 from 8.2 (P ＝ 0.24), respectively. Response rates for insomnia were 50, 60, 100% at week 2, 4, and 6 (P < 0.0001), respectively. The results shows that Nuegra tends to enhance masculine activities including libido, erectile dysfunction and urinary stream and also effective for improving general conditions especially insomnia, muscular weakness and fatigue. In conclusion, this investigation has demonstrated that Nuegra does not only have tendency to increase masculine activities through increased secretion of the testosterone and FSH but also improve general conditions such as erectile dysfunction, libido, fatigue and muscular power.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.554-566
• /
• 2018

The rice husk contains nutrients which can be easily utilized by microorganisms, and also has a water retaining ability, which played a crucial part in enabling it to become a biofilter media. In this study, we evaluated the applicability of rice husk pellet bio-scrubber as a microbiological carrier. The pelletization experiment of rice husk as a biological media was performed using PVA and EVA binder. Also, the feasibility tests of rice husk as a biological media for odor removal were carried out in order to know whether rice-husk contains useful components as a media for microbiological growth or not. Lastly, a combined test for odor gas absorption and biological oxidation was conducted using a lab scale bio-filter set-up packed with rice-husk pellets as wet-scrubber. The major components of the rice husk were carbon, hydrogen, nitrogen, and oxygen, while carbon acted as the main ingredient which comprised up to 23.00%. The C : N : P ratio was calculated as 45 : 1 : 2. Oxygen uptake rate, yield and decay rate of the rice husk eluent was calculated to be $0.0049mgO_2/L/sec$, 0.24 mgSS/mgCOD and 0.004 respectively. The most stable form of rice husk pellets was produced when the weight of the rice husk, EVAc, PVAc, and distilled water was 10 : 2 : 0.2 : 10. The prepared rice husk pellets had an apparent density of 368 g/L and a porosity of 59.00% upon filling. Dry rice husks showed high adsorption capacity for ammonia gas but low adsorption capacity for hydrogen sulfide. The bio-filter odor removal column filled with rice husk pellets showed more than 99.50% removal efficiency for NH3 and H2S gas. Through the analysis of circulation water, the prime removal mechanism is assumed to be the dissolution by water, microbial nitrification, and sulfation. Finally, it was confirmed that the microorganisms could survive well on the rice husk pellets, which provided them a stable supply of nutrients for their activity in this long-term experiment. This adequate supply of nutrients from the rice husk enabled high removal efficiency by the microorganisms.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.73-83
• /
• 2017

Used small household appliances have a wide variety of product types and component materials, and contain high percentage of black plastics. However, they are not being recycled efficiently as conventional sensors such as near-infrared ray (NIR), etc. are not able to detect black plastic by types. In the present study, an automatic sorting system was developed based on laser-induced breakdown spectroscopy (LIBS) to promote the recycling of waste plastics. The system we developed mainly consists of sample feeder, automatic position recognition system, LIBS device, separator and control unit. By applying laser pulse on the target sample, characteristic spectral data can be obtained and analyzed by using CCD detectors. The obtained data was then treated by using a classifier, which was developed based on artificial intelligent algorithm. The separation tests on waste plastics also were carried out by using a lab-scale automatic sorting system and the test results will be discussed. The classification rate of the radial basis neural network (RBFNNs) classifier developed in this study was about > 97%. The recognition rate of the black plastic by types with the automatic sorting system was more than 94.0% and the sorting efficiency was more than 80.0%. Automatic sorting system based on LIBS technology is in its infant stage and it has a high potential for utilization in and outside Korea due to its excellent economic efficiency.

• Particle and aerosol research
• /
• v.13 no.2
• /
• pp.79-85
• /
• 2017

This study identified the loss of minimum fluidization velocity and pressure in accordance with the superficial velocity of $NiO/MoO_3/MoS_2$, a rare metallic oxide and high value-added material in the lab-scale fluidized bed reactor (L=0.25 m, D=0.05 m). The average pressure loss in L/D 1, 2, and 3 of $NiO/MoO_3/MoS_2$ within the scope of superficial gas velocity between 0.07 and 0.45 m/s based on the L/D 1, 2, and 3 of the specimen was shown to be 290~1952 Pa at decreasing flux and 253~1925 Pa at increasing flux. The comparison between the theoretical value proposed by Wen and the test data showed a difference between 0.021~0.36 magnification. Based on these results, this study was able to determine the operation conditions where rare metallic oxides could be applied in real phenomena.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.226-233
• /
• 2023

In this study, the basic physical properties and microstructure of concrete interlocking blocks with amount of different CO₂ gas injection were analyzed according to determine the applicability of In-situ carbonation technology to construction secondary products. The amount of carbon dioxide gas injection was selected as 0, 0.1, 0.3, 0.5, 0.7 wt.% compared to cement amount. A lab-scale press equipment was designed to apply developed carbonation technology to real construction site. And mixer for stable CO₂ gas injection was designed. Using the designed devices, CO₂ gas injected samples were created and physical property of samples were performed. As a result of the physical property test, as the CO₂ injection amount increased to 0.3 %, it showed higher strength behavior compared to the original mix. And more than 0.5 % samples showed lower strength behavior than original sample, but they satisfied the standard of concrete interlocking block. This results were determined that CO₂ injection contributed to the creation of hydrates such as C-S-H. Therefore, the possibility of applying carbonation technology, which injects CO₂ during mixing, to various secondary construction products was confirmed.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.86-92
• /
• 2008

This study was conducted to determine removal effect on phytoplankton (chlorophyll-${\alpha}$ as whole algae) and cyanobacteria by a fish Pseudorasbora parva and macroinvertebrate Palaemon paucidens in September 2006. Three treatments with 25 (T1), 50 (T2) and 100 (T3) individuals along with control (C1, no input fish), and two treatments with 25 (T4) and 50 (T5) individuals along with control (C1) were made for fish and macroinvertebrate, respectively. The initial concentrations of chlorophyll-${\alpha}$ $(Chl_i)$ in each 10L test tank were set up for the levels of $95{\sim}100{\mu}g\;L^{-1}$ and the daily values were monitored in the test tank during 7 days. In the lab tests, P. parva did not show Chl-${alpha}$ removal effect; the removal rate of Chl-${alpha}$ for P. parva was -58% in T1, -56% in T2, and 61% in T3 during the test period. In contrast, P. paucidens. in the treatments of T4 and T5 removed the phytoplankton effectively and the removal effect were appeared to be 33% and 22%, respectively. Also, P. paucidens showed high feeding efficiency in the removal of cyanobacteria. The levels of cyanobacteria were greatly lowed from 6,048 to 927 cells $mL^{-1}$ in T4 and from 6,539 to 1,053 cells $mL^{-1}$ in T5, resulting in 85% and 84% in the removal effect, respectively. Our results for biomanipulation tests suggest that P. paucidens may be used as a potential candidate organism for algae control in spite of the preliminary results by laboratory tests.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.916-927
• /
• 2010

In general water treatment process, the disinfection process by chlorine is used to prevent water borne disease and microbial regrowth in water distribution system. Because chlorines were reacted with organic matter, carcinogens such as disinfection by-products (DBPs) were produced in drinking water. Therefore, a suitable injection of chlorine is need to decrease DBPs. Rechlorination in water pipelines or reservoirs are recently increased to secure the residual chlorine in the end of water pipelines. EPANET 2.0 developed by the U.S. Environmental Protection Agency (EPA) is used to compute the optimal chlorine injection in water treatment plant and to predict the dosage of rechlorination into water distribution system. The bulk decay constant ($k_{bulk}$) was drawn by bottle test and the wall decay constant ($k_{wall}$) was derived from using systermatic analysis method for water quality modeling in target region. In order to predict water quality based on hydraulic analysis model, residual chlorine concentration was forecasted in water distribution system. The formation of DBPs such as trihalomethanes (THMs) was verified with chlorine dosage in lab-scale test. The bulk decay constant ($k_{bulk}$) was rapidly decreased with increasing temperature in the early time. In the case of 25 degrees celsius, the bulk decay constant ($k_{bulk}$) decreased over half after 25 hours later. In this study, there were able to calculate about optimal rechlorine dosage and select on profitable sites in the network map.