• 종축개량
• /
• v.20 no.1
• /
• pp.93-102
• /
• 1998

3원교잡종의 지육지방축척과 육질에 대한 종료종모돈(두록종:D, 버크셔종:B, 매산돈:M)의 영향을 보기 위해, 랜드레이스종과 대요크셔종의 F1(LW) 종빈돈에 D, B 또는 M종의 3품종의 종모돈을 교배시켜 얻은 3원교 잡종(LWD, LWB, LWM)에 대해서 지육의 지방 축적량, 로스육의 물리적 특성과 화학적 조성 또는 근육섬유의 특성, 근육과 피하지방의 지방산 조성을 비교 검토했다. 시험돈은 3원교잡종 각각에 대해서 거세돈 수컷과 암컷을 각각 6두씩, 합계 36두를 공시했다. 단사(單飼), 무제한 급여 하에서 체중이 30kg에서 105kg가 될 때까지 사육했다. 도살한 돼지의 지육우반환(枝肉右半丸)의 제5-6, 8-9, 11-12, 13-14 흉추(胸椎) 간, 제16흉추-제1요추(腰推) 또는 최후요추-제1선추(仙推)간의 횡단면지방의 면적비율은 어떠한 부분에도 LMW이 LWD, LWB보다 통계적으로 유의가 많았다. 로스육의 물리적 특성치인 Tenderness는 $LWM961.3Kgw/cm^2)$ of $LWD(84.13KgW/cm^2)$와 $LWD(87.22KgW/cm^2)$보다 유의적으로 부드럽고, Pliability는 역으로 LWM이 LWD, LWB보다 유의 있게 낮았다. 또 로스육의 근육내 지방함량은 $LWM(3.23\%)$이 $LWD(2.32\%)$과 $LWB(2.35\%)$보다 유의성 있게 많았고, 가열 손실율(加熱損失率)은 LWM이 LWD, LWB보다 유의성 있게 높았다. 근섬유경(筋纖維經)은 LWD가 LWB, LWM보다 큰 경향으로 인정되어 지고, 근속(筋束)의 횡단면적은 LWD가 LWB 또는 LWM보다 유의 있게 조밀했다. LWM은 근육 내 지방산인 오레인산이 LWD, LWB보다 훨씬 높았고, 불포화 지방산의 비율이 높았다. 이상의 결과 종료종모돈이 3원교잡종의 육질에 영향을 미친다는 것이 명확하게 되었다.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.263-270
• /
• 2008

The Gas Hydrate Research and Development Organization (KGHDO) of Korea accomplished successfully geophysical logging (LWD: Logging While Drilling, MWD: Measurement While Drilling) for five sites in 2007, in order to investigate the presence of gas hydrate in the Ulleung Basin, the East Sea of Korea. The togging parameters acquired from LWD/MWD dre electrical resistivity, acoustic velocity, neutron density and porosity, and natural gamma. In addition, pressure, temperature, and diameter of borehole were measured. LWD/MWD data showed several evidences indicating the presence of gas hydrate. Based on LWD/MWD data, three coring sites were selected for sampling of gas hydrate. Subsequently, various gas hydrate samples were collected directly from three sites. Therefore. the presence of gas hydrates was verified by coring. LWD/MWD data will be significantly used to estimate the amount of gas hydrate. Also, they will provide important information to elucidate about sedimentologic characteristics of gas-hydrate bearing formation and sedimentary environment of the Ulleung Basin.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.143-153
• /
• 2009

Using a discrete wavenumber method, we examine the effects on Logging-While-Drilling (LWD) logs when a mismatch exists between the amplitudes or generating times of the signals from individual monopoles in a LWD multipole source. An amplitude-mismatched LWD dipole/quadrupole source produces non-dipole/non-quadrupole modes as well as flexural and screw modes. The strongest of non-dipole/non-quadrupole modes is the Stoneley mode, whose amplitude increases with increasing mismatch. However, we can recover the flexural mode signals by A-C processing, and the screw mode by A-B+C-D processing, respectively. The Stoneley mode, which has the same amplitude at the same radial distance from the borehole axis, is cancelled out by A-C and A-B+C-D processing as long as the tool is placed at the centre of the borehole. The responses from a time-mismatched LWD multipole source look like the summation of responses by two or four monopole sources off the borehole axis. However, we can avoid the misinterpretation of the formation velocities by referring to the computed dispersion curves, which are independent of the arrival times of the modes, on the frequency semblance plot.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.93-96
• /
• 2001

Estimation of leaf wetness duration (LWD) facilitates assessment of the likelihood of outbreaks of many crop diseases. Models that estimate LWD may be more convenient and grower-friendly than measuring it with wetness sensors. Empirical models utilizing statistical procedures such as CART (Classification and Regression Tree; Gleason et al., 1994) have estimated LWD with accuracy comparable to that of electronic sensors.(omitted)

• Journal of Genetic Medicine
• /
• v.17 no.2
• /
• pp.108-111
• /
• 2020

Short stature homeobox-containing gene (SHOX) is a well-known causative gene for the short stature in Turner syndrome. The clinical manifestation of SHOX gene related disorders varies from SHOX haploinsufficiency, presenting with idiopathic short stature, disproportionate short stature, or Leri-Weill dyschondrosteosis (LWD) to recessive form of extreme dwarfism and limb deformity in Langer mesomelic dysplasia. LWD is usually diagnosed upon suspicion based on short stature and skeletal abnormalities, and it is rarely accompanied with respiratory failure in the neonatal period. Here, we report the case of a newborn infant with LWD presenting with severe micrognathia that caused respiratory distress, which was diagnosed using microarray testing. Even when the manifestation of Madelung deformity is not yet apparent, LWD should be considered as one of underlying diseases related to congenital micrognathia.

• Journal of Ginseng Research
• /
• v.40 no.1
• /
• pp.90-96
• /
• 2016

Background: Knowledge on microclimate conditions under artificial shades in a ginseng field would facilitate climate-aware management of ginseng production. Methods: Weather data were measured under the shade and outside the shade at two fields located in Gochang-gun and Jeongeup-si, Korea, in 2011 and 2012 seasons to assess temperature and humidity conditions under the shade. An empirical approach was developed and validated for the estimation of leaf wetness duration (LWD) using weather measurements outside the shade as inputs to the model. Results: Air temperature and relative humidity were similar between under the shade and outside the shade. For example, temperature conditions favorable for ginseng growth, e.g., between $8^{\circ}C$ and $27^{\circ}C$, occurred slightly less frequently in hours during night times under the shade (91%) than outside (92%). Humidity conditions favorable for development of a foliar disease, e.g., relative humidity > 70%, occurred slightly more frequently under the shade (84%) than outside (82%). Effectiveness of correction schemes to an empirical LWD model differed by rainfall conditions for the estimation of LWD under the shade using weather measurements outside the shade as inputs to the model. During dew eligible days, a correction scheme to an empirical LWD model was slightly effective (10%) in reducing estimation errors under the shade. However, another correction approach during rainfall eligible days reduced errors of LWD estimation by 17%. Conclusion: Weather measurements outside the shade and LWD estimates derived from these measurements would be useful as inputs for decision support systems to predict ginseng growth and disease development.

• Korean Journal of Environment and Ecology
• /
• v.34 no.3
• /
• pp.249-258
• /
• 2020

This study aims to provide reference material for effective forest management techniques at the catchment scale, based on the field investigation of large woody debris (LWD) in 11 streams within a third-order forest catchment in Gangwon Province, Korea. To achieve this aim, we analyzed the morphological features of LWD pieces, and the storage and distribution status of LWD by stream order throughout the entire investigation. As a result, a total of 1,207 individual pieces of LWD were categorized into three types as follows: (ⅰ) 1,142 pieces (95%) as only trunk and 65 pieces (5%) as a trunk with root wad, (ⅱ) 1,015 pieces (84%) as non-thinned and 192 pieces (16%) as the thinned, and (ⅲ) 1,050 pieces (87%) as conifer and 157 pieces (13%) as broadleaf. Additionally, in-stream LWD loads (㎥/ha) decreased with increasing stream order, yielding 105.4, 71.3, and 35.6 for first-, second-, and third-order streams, respectively. On the other hand, the ratio of LWD jams to the total LWD volume increased with increasing stream order, yielding 11%, 43%, and 49% for first-, second-, and third-order streams, respectively. Finally, a comparison of the in-stream LWD load with previous studies in several countries around the world indicated that in-stream LWD load was positively correlated with forest stand age even though the climate, topography, forest soil type, forest composition, stand growth rate, disturbance regime, and forest management practices were different. These results could contribute to understanding the significance of LWD as a by-product of forest ecosystems and an indicator of riparian forest disturbance. Based on this, we conclude that advanced forest management techniques, including treatment of thinning slash and stand density control of riparian forest by site location (hillslope and riparian zone, or stream order), should be established in the future, taking the forest ecosystem and the aquatic environment from headwater streams to low land rivers into consideration.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.133-140
• /
• 2021

There are few attempts to estimate the strength and stiffness of controlled low strength material (CLSM) using existing field-testing methods. The objective of this study is to evaluate the resilient modulus of CLSM by using the Light Weight Deflectometer (LWD) and investigate the relationships between the resilient modulus from LWD and the unconfined compressive strength (UCS) and secant modulus of elasticity from unconfined compressive test. Five CLSMs with different mix designs are used to evaluate the flowability and the stiffening of the CLSM in the flow and Vicat needle tests, respectively. To evaluate the early strength and stiffness characteristics, unconfined compressive tests are performed using the CLSM specimens cured for 1 and 7 days. LWD tests are carried out to estimate the resilient modulus of the CLSM specimens. The experimental results show that for the curing time of 1 day, the UCS and secant modulus of elasticity generally increase with the fast setting mortar content (FC). The CLSM specimen with the highest FC shows the significant increase in the UCS and secant modulus of elasticity along the curing time. Overall, the resilient modulus for the curing time of 1 day increases with the FC, while that for the curing time of 7days decreases with an increase in the FC. From the results, the linear relationships between the resilient modulus and UCS and secant modulus of elasticity are established.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.147.1-147.1
• /
• 2011

지식경제부 가스 하이드레이트 개발사업의 일환으로 동해 울릉분지 가스 하이드레이트 2차 시추(Ulleung Basin Gas Hydrate Drilling Expedition: UBGH2)가 2010년 7월 8일부터 9월 30일까지 D/V Fugro Synergy를 이용하여 수행되었다. UBGH2 수행을 위해 선정된 13개 site에서 약 1개월 동안 Schlumberger사의 장비를 이용 Logging-While-Drilling/Measurement-While-Drilling(LWD/MWD) 자료를 취득하였다. LWD/MWD 자료는 선상에서 분석되었으며, 이 결과는 coring 및 borehole plan 수립을 위하여 활용되었다. Coring Phase 동안 10개 site의 18개 hole로부터 퇴적물 코어 시료를 채취하고 선상에서 퇴적학, 지구화학, 생지화학, 물리적 특성 등 각종 분석과 측정 작업을 수행하였다. 약 2개월에 걸쳐 수행된 coring phase 동안에 2개 site에서 FAOL(Fugro Alluvial Offshore Limited)사의 장비를 이용 Wireline Logging/Vertical Seismic Profile(WL/VSP) 자료도 취득하였다. LWD/MWD phase와 coring phase 동안 12개 site에서 무인잠수정(remotely operated vehicle: ROV)를 이용하여 퇴적물 시료 채취, 해저면 관찰, 용존메탄 측정 등의 작업을 수행하였으며, 선상에서 취득된 이들 자료를 분석하였다. Coring을 수행한 모든 site에서 가스 하이드레이트 부존을 확인하였으며, 다양한 산상의 가스 하이드레이트 실물을 회수하고 분석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.229-236
• /
• 2015

In this study, the resilient modulus test and Light Weight Deflectormeter (LWD) test were conducted to simulate the moving vehicle load for the evaluation of the internal failure of epoxy asphalt pavement. The Measured displacement in the resilient modulus test of epoxy asphalt concrete showed very little residual deformation under repeated loads unlike the conventional asphalt. Therefore, the test results were evaluated as a normal state due to its similarity with elastic deformation. The deflection results from the resilient modulus tests were converted to the surface deflection modulus and the normal range of surface deflection modulus was estimated applying LWD measurement of 1 SIGMA level. Internal failure of pavements were estimated using the suspicious failure range at $60^{\circ}C$ and hysteresis. Internal moisture penetration and a decrease in bonding were observed in partial areas at $140{\mu}m$ of surface deflection. However, the areas showed inflection points in the hysteresis. Field investigation by suggested criterion indicated a high degree of accuracy.