• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3175-3176
• /
• 2012

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2747-2754
• /
• 2010

Cupping therapy has been used to extensive diseases. However, the research was yet to meridian and acupoint's change of state caused by Cupping. This study was considered a human-ripple effect by the anlaysis of meridian & acupoint's change of state. We developed the system which is keeps 30kPa Negative-pressure and stimulated on the Left Lung Meridian(LU) a halfway point between LU4 and LU5. We checked moisture and elasticity change on left/right acupoints & non-acupoints, then measured EMG Signal. We observed that moisture had little change(12.49%) and the better part of the elasticity on both sides had identified the change(64.42%). The number of the provoked acupoiunt elasticity change was more than non-acupoint. Also, elasticity change of Right side was more than Left side. We confirmed that RMS and Median Power change patterns were lower in proportional to the elastin change, but there was no significance about Median Frequency. Therefore inducing the change of elasticity and EMG signal on meridian-acupoints. Therefore, We checked the human-ripple effect Negative-pressure by the Cupping therapy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.1
• /
• pp.14-18
• /
• 2016

A novel $Ce^{3+}$ doped $(Ce_xLu_{1-x})_3MgAl_3SiO_{12}$ phosphor was successfully synthesized by a conventional solid-state reaction. Heat-treatment temperature was controlled from 1250 to $1550^{\circ}C$ for 5 h. XRD and PL properties were analyzed for the optimum heat-treatment condition. Ce doping concentration was varied from 2.0 to 10.0 mol% for the optimum Ce doping concentration. The PL intensity, peak wavelength and FWHM were calculated with the Ce doping concentration, and evaluated for the application to LED packaging. Particle size and morphology were also characterized for synthesized phosphor sample at optimum heat-temperature and Ce doping concentration.

• Journal of Acupuncture Research
• /
• v.30 no.5
• /
• pp.65-76
• /
• 2013

Objectives : This study was designed to find out the differences of the acupuncture sensation by body parts. Methods : Sixty-three subjects got acupuncture at five acupoints which represent five different body parts ; head($GV_{20}$), abdomen($ST_{25}$), back($BL_{24}$), upper extremity($LU_9$), lower extremity($GB_{40}$). All subjests were asked to complete questionnaire rating the intensity of 13 kinds of acupuncture sensation(acupuncture sensation scale, ASS). We compared the subjective acupuncture sensation between the body parts. Results : Intensity of acupuncture sensation of $GV_{20}$ was significantly lower than $LU_9$(p=0.001) and $GB_{40}$(p=0.000). Sum of acupuncture sensation of $GV_{20}$ was also significantly lower than $BL_{24}$(p=0.011), $LU_9$(p=0.004) and $GB_{40}$(p=0.033). Among the 13 types of acupuncture sensation scale, tingling and aching were well sensed at $GV_{20}$ and $ST_{25}$, aching, tingling and sharp pain were well sensed at $LU_9$, $GB_{40}$, dull pain, deep pressure and heaviness were well sensed at $BL_{24}$. Conclusions : Head showed significantly lower intensity of acupuncture sensation than upper extremity and lower extremity. Among the acupuncture sensation scales, tingling and aching were well sensed at head and abdomen, aching, tingling and sharp pain were well sensed at upper extremity and lower extremity, dull pain, deep pressure and heaviness were well sensed at back.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.278-286
• /
• 2013

PURPOSE. The aim of this study was to determine whether the push-out bond strengths between the radicular dentin and fiber reinforced-composite (FRC) posts with various resin cements decreased or not, according to the coronal, middle or apical level of the root. MATERIALS AND METHODS. FRC posts were cemented with one of five resin cement groups (RelyX Unicem: Uni, Contax with activator & LuxaCore-Dual: LuA, Contax & LuxaCore-Dual: Lu, Panavia F 2.0: PA, Super-Bond C&B: SB) into extracted human mandibular premolars. The roots were sliced into discs at the coronal, middle and apical levels. Push-out bond strength tests were performed with a universal testing machine at a crosshead speed of 0.5 mm/min, and the failure aspect was analyzed. RESULTS. There were no significant differences (P>.05) in the bond strengths of the different resin cements at the coronal level, but there were significant differences in the bond strengths at the middle and apical levels (P<.05). Only the Uni and LuA cements did not show any significant decrease in their bond strengths at all the root levels (P>.05); all other groups had a significant decrease in bond strength at the middle or apical level (P<.05). The failure aspect was dominantly cohesive at the coronal level of all resin cements (P<.05), whereas it was dominantly adhesive at the apical level. CONCLUSION. All resin cement groups showed decreases in bond strengths at the middle or apical level except LuA and Uni.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.27 no.2
• /
• pp.193-212
• /
• 2016

The purpose of this paper is to explain the necessity of secure budget in public libraries with regard to promoting library usage. It is namely to attempt to find out if there really is a connection between library funding and library usage. For this purpose, the relevant data of all the 31 public libraries in Busan were collected from the 2013 National library Statistics of Korea. To determine the connection between library funding and usage, two variables were selected, 'TFI (Total Funding Indicator) = $\sqrt{personnelcosts{\times}materialcosts}$' for independent variable and 'LU (Library Usage) = (visits per year) + (loans per year)/number of inhabitants' for dependent variable. The results showed that there is a clear relationship between TFI and LU and If more cost is spent on personal resources and material resources, the total usage of the public library also increase. The findings are limited due to the fact that the observation was focusing on public libraries in one community and the period of observation was one year in 2013.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.567-572
• /
• 2019

In this paper, we propose an algorithm to perform convolution, pooling, and ReLU operations in CNN using binary image and binary kernel. It decomposes 256 gray-scale images into 8 bit planes and uses a binary kernel consisting of -1 and 1. The convolution operation of binary image and binary kernel is performed by addition and subtraction. Logically, it is a binary operation algorithm using the XNOR and comparator. ReLU and pooling operations are performed by using XNOR and OR logic operations, respectively. Through the experiments to verify the usefulness of the proposed algorithm, We confirm that the CNN operation can be performed by converting it to binary logic operation. It is an algorithm that can implement deep running even in a system with weak computing power. It can be applied to a variety of embedded systems such as smart phones, intelligent CCTV, IoT system, and autonomous car.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2133-2137
• /
• 2012

Objective: To investigate the prognostic role of antigen KI-67 (Ki-67) and G1/S-specific cyclin-D1 (cyclin-D1) in patients with laryngeal squamous cell carcinoma (LSCC). Methods: Immunohistochemical staining (IHS) was used to determine the protein expression of Ki-67 and cyclin-D1 in LSCC tissues. Kaplan-Meier survival curves was calculated with reference to Ki-67 and cyclin-D1 levels. Results: Cyclin-D1 and Ki67 were expressed in the nuclei of cancer cells. Among the total of 92 cancer tissues examined by immunohistochemistry, 60 (65.22%) had cyclin-D1 overexpression and 56 (60.87%) had Ki67 overexpression. Cyclin-D1 overexpression is associated with the advanced stage of the cancer (P=0.029), but not with gender, age, stage of cancer, histological differentiation, anatomical site, smoking history and alcohol consumption history. Ki67 overexpression is not associated with the advanced stage, gender, age, histological differentiation, anatomical site, smoking history and alcohol consumption history. A statistically significant correlation was found between lymph node status and the expression of Ki67 (p = 0.025). Overexpression of cyclin-D1 was correlated to shorter relapse-free survival period (P<0.001). Conclusions: Overexpression of cyclin-D1 can be used as a marker to predict relapse in patients with LSCC after primary curative resection.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.233-242
• /
• 2021

In this paper, as a liberal arts course for non-majors, we proposed a supervised learning artificial neural network parameter optimization method and a basic education method for activation function to design a basic artificial neural network subject curriculum. For this, a method of finding a parameter optimization solution in a spreadsheet without programming was applied. Through this training method, you can focus on the basic principles of artificial neural network operation and implementation. And, it is possible to increase the interest and educational effect of non-majors through the visualized data of the spreadsheet. The proposed contents consisted of artificial neurons with sigmoid and ReLU activation functions, supervised learning data generation, supervised learning artificial neural network configuration and parameter optimization, supervised learning artificial neural network implementation and performance analysis using spreadsheets, and education satisfaction analysis. In this paper, considering the optimization of negative parameters for the sigmoid neural network and the ReLU neuron artificial neural network, we propose a training method for the four performance analysis results on the parameter optimization of the artificial neural network, and conduct a training satisfaction analysis.