• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6A
• /
• pp.558-567
• /
• 2011

In this paper, we propose a partial full duplex relay scheme for 3GPP (3rd Generation Partnership Project) LTE (Long Term Evolution)-Advanced system using a Type 1 relay. The Type 1 relay as inband relay is prohibited to transmit and receive simultaneously because of self-interference. Therefore, the Type 1 relay cannot receive synchronization signals which are transmitted to eNB. To overcoming this problem, we propose the partial full duplex relay scheme which transmits to R-UE (Relay-User Equipment) and receives from eNB (evolved NodeB) simultaneously when eNB and the Type 1 relay transmit subframes which have synchronization signals. Additionally, for solving self-interference, the Type 1 relay transmitter and receiver antennas are sufficiently sufficiently isolated and self-interference cancellation is applied for the self-interference signal from the relay transmitter. Thus, the partial full duplex relay scheme can receive synchronization signals from eNB and solve the problems of conventional solutions and we propose the partial channel estimation scheme for partial full duplex relay scheme using SCI. By extensive computer simulation, we verify that the partial full duplex relay scheme is attractive and suitable for the Type 1 relay system.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.408-414
• /
• 2019

We developed a surveillance tool for collision avoidance of unmanned aerial vehicles (UAVs) in urban areas. In our tool, users can visualize the safety distance on the actual 3D map of urban area. The estimated positions of UAVs are assumed to be obtained based on the long-term evolution (LTE) signals. The safety distance is defined to include two or more signals with bias. The safety distance calculation method used in this paper enables simulation similar to the actual urban areas where signals are frequently biased due to multipath. In the simulation, the parameters were set based on the measured values, and the change of the safety distance according to the number of faulty signals was simulated. As a result, increasing the number of faulty signals led to a longer safety distance as expected.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.513-522
• /
• 2016

We propose a mechanism for monitoring load in quality of service (QoS)-enabled wireless networks and show how it can be used for network management as well as for dynamic pricing. Mobile network traffic, especially video, has grown exponentially over the last few years and it is anticipated that this trend will continue into the future. Driving factors include the availability of new affordable, smart devices, such as smart-phones and tablets, together with the expectation of high quality user experience for video as one would obtain at home. Although new technologies such as long term evolution (LTE) are expected to help satisfy this demand, the fact is that several other mechanisms will be needed to manage overload and congestion in the network. Therefore, the efficient management of the expected huge data traffic demands is critical if operators are to maintain acceptable service quality while making a profit. In the current work, we address this issue by first investigating how the network load can be accurately monitored and then we show how this load metric can then be used to provide creative pricing plans. In addition, we describe its applications to features like traffic offloading and user satisfaction tracking.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.27-37
• /
• 2022

In this paper, we presents a Multiple User Multiple Input Multiple Output (MU-MIMO) test-bed system for Time Division Duplex (TDD) Long Term Evolution-Advanced (LTE-A). Using two parameters, the condition number of the channel matrix and the path gain, the MU-MIMO system could switch pre-coder to maintain target Bit Error Rate (BER) level. This paper also introduces a calibration procedure for compensating error of Radio Frequency (RF) paths of the antennas and RF transceivers. From experimental measurements, dynamic pre-coding scheme could maintain target BER, set to 10^-3, with the pre-coder set configured with Zero Forcing (ZF), Tomlinson Harashima Pre-coding (THP), Lattice Reduction (LR). The simplest pre-coder ZF is adopted in stable channel, and when path gain become less than 0.25, LR is adopted. Lastly, when condition number of channel matrix become larger than 7, THP is adopted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.723-731
• /
• 2016

A core technological base to provide enhanced data rates required by 5G mobile wireless communications is the improved bandwidth efficiency using massive multiple-input multiple-output (MIMO) transmission. MIMO transmission requires the channel estimation using the channel state information reference signaling (CSI-RS) and appropriate beamforming, thus the design of the codebook defining proper beamforming vectors is an important issue. In this paper, we propose a multi-rank codebook based on the discrete Fourier transform (DFT) matrix, by utilizing statistical properties of the channel generated by the spatial channel model (SCM). The proposed method includes a structural change of the precoding matrix indicator (PMI) by considering the phase difference distributions between adjacent antenna elements, as well as the selected codevector characteristics of each transmission layer. Performance gain of the proposed method is evaluated and verified by making the performance comparison to the 3GPP standard codebooks adopted by Long-Term Evolution (LTE) systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.10-19
• /
• 2012

In this paper, we propose an Adaptive Modulation and Coding (AMC) scheme using relay protocols generally known as Relay Node (RN). The AMC scheme is used for improving the throughput and a reliability of a communication system, because of the nature of different modulation and coding schemes. We analyze the performance of relay protocols with the AMC scheme and observed that relay protocols with the AMC scheme is capable of providing better average throughput at a lower Signal to Noise Ratio (SNR) level as compared to the conventional scheme with no AMC. We perform Monte Carlo simulations with Long Term Evolution-Advanced (LTE-A) parameters to prove the performance comparison of adaptive Modulation and Coding Scheme (MCS) relay protocols with the non-adaptive MCS relay protocols. The simulation results of the proposed system with adaptive MCS prove that among the Amplify-and-Forward (AF), Decode-and-Forward (DF) and DeModulate-and-Forward (DMF), the DMF protocol performs best at a lower SNR value and also provides better average throughput.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.85-92
• /
• 2019

This paper presents a SDR-based Long Term Evolution Advanced (LTE-A) Physical Downlink Shared Channel (PDSCH) decoder using a multicore Digital Signal Processor (DSP). For decoder implementation, multicore DSP TMS320C6670 is used, which provides various hardware accelerators such as turbo decoder, fast Fourier transformer and Bit Rate Coprocessors. The TMS320C6670 is a DSP specialized in implementing base station platforms and is not an optimized platform for implementing mobile terminal platform. Accordingly, in this paper, the hardware accelerator was changed to the terminal implementation to implement the LTE-A PDSCH decoder supporting the multi-antenna and the functions not provided by the hardware accelerator were implemented through core programming. Also pipeline using multicore was implemented to meet the transmission time interval. To confirm the feasibility of the proposed implementation, we verified the real-time decoding capability of the PDSCH decoder implemented using the LTE-A Reference Measurement Channel (RMC) waveform about transmission mode 2 and 3.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.215-222
• /
• 2011

In this paper, we propose a power control scheme for effective serving cell selection in Relay environment of 3GPP (3rd Generation Partnership Project) LTE (Long Tenn Evolution)-Advanced system. A conventional serving cell selection scheme which does not use channel states of backhaul link has a problem that this scheme does not select serving cell supporting maximum throughput. Also, conventional proposed serving cell selection schemes that eNB or RN transmits channel states of backhaul link have problems that conventional schemes need to additional data transmission, serving cell selection process complexity is increased because UE considers channel states of backhaul link, and received signal is degraded because strong interference which is transmission signal from RN. Therefore, for solve these problems, we propose power control scheme that RN control transmission power according to received SINR (Signal to Interference plus Noise Ratio) of backhaul link. By extensive computer simulation, we verify that the power control Relay scheme is attractive and suitable for the Relay environment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.885-896
• /
• 2013

MTC(Machine Type Communications), providing a variety of services anytime and anywhere by connecting the cellular network to the machine and things without human intervention, is being considered as a major challenge of the next-generation communications. Currently, When a massive MTC devices simultaneously connect to the network, each MTC device needs an independent access authentication process. Because of this process, authentication signaling congestion and overload problems will cause in LTE-Advanced. In this paper, we propose a group-based authentication protocol and a key management protocol. For managing the MTC devices as group units, the proposed protocol elects a group leader and authentications only once with the core network. After the authentication is completed, a group leader manages the rest members and MME(Mobility Management Entity) by constructing a binary tree. Finally, the propose protocol analysis show that the proposed protocol not only can reduces the authentication signaling which generated in between the MTC devices and the core network but also can manages the MTC devices, efficiently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2113-2120
• /
• 2011

In this paper, so as to improve spectral efficiency for cell-boundary users, we introduce a coordinated multi-point (CoMP) system, which is one of inter-cell cooperative transmission strategies studied in 3GPP long-term evolution-advanced (LTE-A) systems, and develop a system-level simulator to evaluate performance. To identify performance improvement of the system with inter-cell cooperative transmission, we select a 3GPP LTE system as a reference, which shows the highest performance among the existing mobile communication systems, and conduct a performance comparison. System-level simulation is performed based on widely-used OPNET tool. We implement modules including central unit (CU), CoMP eNodeB (CeNB), user equipment (UE), and multiple-input multiple-output (MIMO) channel model, while designing the inter-cell cooperative transmission system. Under WINNER wireless channel model and international telecommunication union (ITU) network model environments, we then evaluate the performance of edge users who belong to the lower 5% in terms of spectral efficiency. It is finally shown that throughput of the proposed CoMP system gets improved up to 2.5 times compared to that of the 3GPP LTE reference system.