• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.403-411
• /
• 2013

Horizontal construction projects such as oil and gas pipeline projects typically involve repetitive-work activities with the same crew and equipment from one end of the project to the other. Repetitive scheduling also known as linear scheduling is known to have superior schedule management capabilities specifically for such horizontal construction projects. This study discusses on expanding the capabilities of repetitive scheduling to account for the variance in production rates and visual representation by developing an automated alignment based linear scheduling program for applying temporal and spatial changes in production rates. The study outlines a framework to apply changes in productions rates when and where they will occur along the horizontal alignment of the project and illustrates the complexity of construction through the time-location chart through a new linear scheduling model, Linear Scheduling Model with Varying Production Rates (LSM_VPR). The program uses empirically derived production rate equations with appropriate variables as an input at the appropriate time and location based on actual 750 mile natural gas liquids pipeline project starting in Wyoming and terminating in the center of Kansas. The study showed that the changes in production rates due to time and location resulted in a close approximation of the actual progress of work as compared to the planned progress and can be modeled for use in predicting future linear construction projects. LSM_VPR allows the scheduler to develop schedule durations based on minimal project information. The model also allows the scheduler to analyze the impact of various routes or start dates for construction and the corresponding impact on the schedule. In addition, the graphical format lets the construction team to visualize the obstacles in the project when and where they occur due to a new feature called the Activity Performance Index (API). This index is used to shade the linear scheduling chart by time and location with the variation in color indicating the variance in predicted production rate from the desired production rate.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2003

For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.283-287
• /
• 2007

KIER has been developing the anode-supported flat tubular solid oxide fuel cell unit bundle for the intermediate temperature($700{\sim}800^{\circ}C$) operation. Anode-supported flat tubular cells have Ni/YSZ cermet anode support, 8 moi.% $Y_2O_3$ stabilized $ZrO_2(YSZ)$ thin electrolyte, and cathode multi-layer composed of Sr-doped $LaSrMnO_3(LSM)$, LSM-YSZ composite, and $LaSrCoFeO_3(LSCF)$. The prepared anode-supported flat tubular cell was joined with ferritic stainless steel cap by induction brazing process. Current collection for the cathode was achieved by winding Ag wire and $La_{0.6}Sr_{0.4}CoO_3(LSCo)$ paste, while current collection for the anode was achieved by using Ni wire and felt. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90\;cm^2$ connected in series with 12 unit bundles, in which unit bundle consists of two cells connected in parallel. The performance of unit bundle in 3% humidified $H_2$ and air at $800^{\circ}C$ shows maximum power density of $0.39\;W/cm^2$ (@ 0.7V). Through these experiments, we obtained basic technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular cell unit bundle.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.307-319
• /
• 2016

A Land-Atmosphere Modeling Package (LAMP) for supporting agricultural and forest management was developed at the National Center for AgroMeteorology (NCAM). The package is comprised of two components; one is the Weather Research and Forecasting modeling system (WRF) coupled with Noah-Multiparameterization options (Noah-MP) Land Surface Model (LSM) and the other is an offline one-dimensional LSM. The objective of this paper is to briefly describe the two components of the NCAM-LAMP and to evaluate their initial performance. The coupled WRF/Noah-MP system is configured with a parent domain over East Asia and three nested domains with a finest horizontal grid size of 810 m. The innermost domain covers two Gwangneung deciduous and coniferous KoFlux sites (GDK and GCK). The model is integrated for about 8 days with the initial and boundary conditions taken from the National Centers for Environmental Prediction (NCEP) Final Analysis (FNL) data. The verification variables are 2-m air temperature, 10-m wind, 2-m humidity, and surface precipitation for the WRF/Noah-MP coupled system. Skill scores are calculated for each domain and two dynamic vegetation options using the difference between the observed data from the Korea Meteorological Administration (KMA) and the simulated data from the WRF/Noah-MP coupled system. The accuracy of precipitation simulation is examined using a contingency table that is made up of the Probability of Detection (POD) and the Equitable Threat Score (ETS). The standalone LSM simulation is conducted for one year with the original settings and is compared with the KoFlux site observation for net radiation, sensible heat flux, latent heat flux, and soil moisture variables. According to results, the innermost domain (810 m resolution) among all domains showed the minimum root mean square error for 2-m air temperature, 10-m wind, and 2-m humidity. Turning on the dynamic vegetation had a tendency of reducing 10-m wind simulation errors in all domains. The first nested domain (7,290 m resolution) showed the highest precipitation score, but showed little advantage compared with using the dynamic vegetation. On the other hand, the offline one-dimensional Noah-MP LSM simulation captured the site observed pattern and magnitude of radiative fluxes and soil moisture, and it left room for further improvement through supplementing the model input of leaf area index and finding a proper combination of model physics.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.900-902
• /
• 2002

This paper deals with reduction of torque ripple of slotless PM linear synchronous motor (PMLSM) with divided permanent magnet using 2D analytical method. To confirm the validity of this study, analysis values by analytical method are comprared with the results of 2D FEM and experimental results. And the results of divided PM model is compared with none divided PM model.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.308-313
• /
• 2015

This paper describes a technique for complete identification of a two-dimensional scattering object and multiple objects immersed in air using microwaves where the scatterers are assumed to be a homogenous dielectric medium. The employed technique consists of initially retrieving the shape and position of the scattering object using a linear sampling method and then determining the electric permittivity and conductivity of the scatterer using adjoint sensitivity analysis. Incident waves are assumed to be TM (Transverse Magnetic) plane waves. This inversion algorithm results in high computational speed and efficiency, and it can be generalized for any scatterer structure. Also, this method is robust with respect to noise. The numerical results clearly show that this hybrid approach provides accurate reconstructions of various objects.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.1
• /
• pp.49-57
• /
• 2017

With the prevalence of mobile devices, many organizations introduce MDM BYOD and try to increase the level of security with them. However, device control of mobile devices in application level cannot be a solution against the fundamental problems. In this paper, we propose a more flexible and more secure method to control the hardware devices using Linux Security Module in the kernel level with the mandatory access control.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.221-224
• /
• 2004

최근 무선 랜의 상용화에 따른 다양한 어플리케이션들이 제공되고 있다. 이 중 대용량 멀티미디어 트래픽을 사용한 다양한 서비스가 제공되고 있는데, 이들에 대한 QoS 보장을 위한 다양한 기법들이 세안되고 있다. 기존의 802.11에서는 CSDP 스케줄러를 이용하여 각각의 MH로 보내지는 데이터에 대한 QoS를 보장하기 위해 노력하였고, WG(Working Group) e가 만들어지면서 보다 상세하게 데이터 트래픽에 대한 QoS를 더 연구하게 되었다. 본 논문에서 제안하고자 하는 스케줄러는 IEEE 802.11에 CSDP (Channel State Dependent Packet) 스케줄러의 LSM(Link State Monitoring)의 개념과 IEEE 802.11e에서 제안하고 있는 EDCA (Enhanced Distributed Channel Access)방식과 HCCA (HCF Controlled Channel Access) 방식이 결합되어 있는 스케줄러에 실제 스케줄링이 이루어지는 PHY Queue에 가기 전 대기하는 Queue에 가상 큐를 적용하여 트레픽 특성을 고려하고, bad가 발생하는 링크로 가는 트래픽에 대해서는 임시 큐에 저장한 후에 링크가 good 상태가 되면 전송함으로써 보다 높은 QoS를 제공하며, 전체 시스템의 효율을 향상시키는 스케줄러를 제안하고자 한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.53-54
• /
• 2014

본 논문에서는 멀티채널 오디오 재생시스템을 구성하는 라우드스피커들이 표준위치와 상이한 위치에 존재할 경우 입력된 멀티채널 오디오 신호가 표현하는 음장감을 최대한 유지하면서 주어진 라우드스피커 배치환경에 최적으로 가상음원과 멀티채널 오디오 신호를 재생하는 방법을 제안한다. 능동잡음제어 기술에 이용되는 LSM 기술을 활용하여 원음장과 스피커를 통해 재생되는 복원음장 사이의 오차를 최소화하는 음향공간필터를 설계하여 적용하였으며, 청취평가를 통하여 음장감이 유지됨을 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.27-36
• /
• 2001

본고에서는 고정도 제품을 생산하는 연삭기에 대해 가공물 및 연삭 공구인 연삭 숫돌을 기상에서 측정하기 위한 여러 가지 방법들을 소개하였고 일부는 적응 예를 기술하였다. 소개된 기상 측정장치들은 특히 반복 공정이 필요한 연삭 현장에서 생산성 향상을 위해 유용하게 활용될 수 있을 것으로 생각된다. 그러나 관련 연구가 지속된다면 연삭기의 작업조건 자동 설정, 연삭 상태 진단 등, 연삭기의 지능화에도 적극적으로 응용될 수 있을 것으로 기대된다.