• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.36-41
• /
• 2004

The blanking of thin sheet metal using progressive dies is an important process on production of precision electronic machine parts such as IC leadframe. This paper summarizes the results of simulating the progressive blanking process by means of LS/DYNA. In order to verify the influence of blanking order on the final lead profile and deformed configuration, simulation technique has been proposed and analyzed using a commercial FEM code, LS/DYNA. The results of FE-simulations are in good agreement with the experimental result. After then, to construct rule base in progressive blanking process, FE-simulation has been performed using a simple model. Based on this result rule base is set up and then the blanking order of inner lead is rearranged. Consequently, from the results of FE-simulation using suggested method in this paper, it is possible to predict the shift of lead to manufacture high precision lead frame in progressive blanking process. The proposed method can give more systematic and economically feasible means for designing progressive blanking process.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.87-94
• /
• 2006

본 연구에서는 헬리콥터 스키드형 강착장치에 대한 비선형 충돌해석을 수행하였으며, 실제 운용중인 헬리콥터(SB427)의 강착장치 시스템이 해석에 고려되었다. 재료의 소성 거동특성과 두께변화를 고려한 3차원 유한요소 모델을 구축하였으며, LS-DYNA(Ver.970)를 활용하여 다양한 충돌 조건에 대한 전산충돌해석을 수행하여 특성을 검토하였다. 지면충돌에 기인한 강착장치의 비선형 천이응답이 설계요구조건에 대해 검토되었다. 다양한 충돌조건에 대해 비선형 충돌해석으로 예측한 최대 구조 변형량을 실험결과와 정량적으로 비교하였으며, 마찰의 영향을 고려하는 것이 해석결과의 정확성에 매우 중요함을 보였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2004

선박의 충돌 또는 좌초 사고에 대응하기 위하여 위험 화물을 운반하는 선박의 경우 이중 선체를 채용하고 있으나 이중선체의 충돌 에너지 흡수 정도와 내판의 파단 여부를 효과적으로 판단하는 기준은 아직 연구 대상으로 남아 있다. 본 연구에서는 실제선박의 충돌강도 해석을 하기 위해서 상용해석코드인 LS-DYNA3D를 사용하고 다양한 시나리오에 따라 동적 해석을 수행하였다. 본 연구를 위하여 46K의 Chemical／Product Carrier를 해석 대상 선박으로 정하여 하중 조건과 충돌 속도를 달리하여도 Energy-Indentation, Force-Indentation에 관한 연구를 수행하였다. 본 연구를 통해 얻어진 결과 및 정의는 충돌 사고에서의 매커니즘과 충돌 강도 평가에 유익한 정보를 제공하게 될 것이라 판단된다.

• International Journal of Aerospace System Engineering
• /
• 제5권1호
• /
• pp.1-8
• /
• 2018

Military rotorcrafts are constantly exposed to risk from bullet impacts because they operate in a battle environment. Because bullet impact damage can be deadly to crews, the fuel tanks of military rotorcraft must be designed taking extreme situations into account. Fuel tank design factors to be considered include the internal fluid pressure, the structural stress on the part impacted, and the kinetic energy of bullet strikes. Verification testing using real objects is the best way to obtain these design data effectively, but this imposes substantial burdens due to the huge cost and necessity for long-term preparation. The use of various numerical simulation tests at an early design stage can reduce the risk of trial-and-error and improve the prediction of performance. The present study was an investigation of the effects of bullet impacts on a fuel tank assembly using numerical simulation based on SPH (smoothed particle hydrodynamics), and conducted using the commercial package, LS-DYNA. The resulting equivalent stress, internal pressure, and kinetic energy of the bullet were examined in detail to evaluate the possible use of this numerical method to obtain configuration design data for the fuel tank assembly.

• 소성∙가공
• /
• 제23권7호
• /
• pp.431-438
• /
• 2014

For electromagnetic forming(EMF) the most important feature is a forming coil which creates the electromagnetic force(Lorentz force), using current density and a magnetic field. Most previous papers have concentrated on the final configuration of the blank or the efficiency of EMF process. Studies focused on the design parameters affected by the forming coil performance have not been conducted. In order to design a suitable forming coil for an object, the current study uses LS-DYNA EM-Module to not only optimize the coil but also to examine the effect of coil performance. By this method a suitable forming coil was made and tested to determine whether or not good formability was achieved in a free bulge test Numerical analysis was also used. The workpiece was Al 1100-O with a thickness of 1.27mm and the coil was made from copper CW004A, which has good electrical conductivity and is suitable for electrical components.

• 선박안전
• /
• 통권23호
• /
• pp.2-13
• /
• 2007

With the effectuation of the amendment of MARPOL 73/78 on 5 April 2005, enforcement regulations of Marine Pollution Prevention Act were revised in domestic on 12 March 2005 that double hull structure was required to the small single bottom oil tankers under DWT(deadweight tonnage) 500 ton for the protection of the marine pollution casualties. The objective of this study is to develop the double bottom structure of small oil tanker under DWT 500 ton with superior crashworthiness and to establish its suitable standard to double bottom structure. The promoting strategy of this R&D is classified into the crashworthy structural analysis of small oil tankers using LS/DYNA3D code and the examination of their damage stabilities according to tonnage. It could be thought that the desirable inner bottom height should be above the B/7.5 and its minimum height 0.65m for the domestic small oil tanker under DWT 500ton.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.552-559
• /
• 2011

An interest in Arbitrary Lagrangian Eulerian (ALE) finite element methods has been increased due to more accurate responses in Fluid-Structure Interaction(FSI) problems. The multi-material ALE approach was applied to the prediction of the acceleration response of free-fall lifeboat, and its responses were compared to those of the single-material ALE one. It could be found that even though there was no big difference in the simulation responses of two methods, the single-material and multi-material ALE ones, the latter multi-material ALE method showed a little bit more close response to those of experimental results compared to the former single-material ALE one, especially in the x- and z-direction acceleration responses. Through this study, it could be found that several parameters in the ALE algorithms have to be examined more carefully for a good structural safety assessment of FSI problems.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.60-67
• /
• 2016

The gas leak and explosion accident is able to give a fatal injury to nearby people from the explosion center and interest in effect of the explosion on the human body is increased. Accidents by Portable Butane Gas Range of a gas explosion accident occupy the most share. As a result, the injury on the human body frequently occur. However, It is situation that are experiencing difficulties in consequence analysis of explosion accidents owing to shortage of explosion power data and lack of research on the effect of the human body by the gas explosion. This paper acquire human injury data by performing the actual explosion experiment with Portable Butane Gas Range and evaluate power by explosion and effect of explosion on the human body to perform explosion simulation with LS-DYNA program. It is intended to contribute to the exact cause of the accident investigation and the same type of accident prevention.

• 한국재난정보학회 논문집
• /
• 제12권3호
• /
• pp.279-285
• /
• 2016

차량방호울타리는 교통사고 발생 시 마지막 안전장치이다. 차량방호울타리의 구조적 성능이 기대 수준 이상으로 유지가 되어야지만 운전자 혹은 차량 탑승자의 생명을 보호해 줄 수 있게 된다. 단부처리시설은 방호울타리의 끝단에 설치되며 차량 충돌 시 가드레일이 차량에 관통하는 현상을 방지함과 동시에 충격을 흡수하는 형태의 시설물이다. 이러한 차량방호울타리의 개발을 위하여 컴퓨터 시뮬레이션을 통한 반복해석을 수행함으로서 다양한 변수에 적절히 대응하는 방호울타리를 개발할 수 있을 것이다.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.427-434
• /
• 2019

This study investigates the structural integrity of the amphibious tour bus under the rollover condition. The multi-purpose bus called Dual Mode Tour Bus (DMTB) which explores on land and water has been designed on top of a truck platform. Prior to the fabrication of new upper body and sailing equipment of DMTB, computational analysis investigates the rollover protection of the proposed structure including superstructure, wheels, and axles. The Computer-Aided Design (CAD) of the whole vehicle model is meshed and preprocessed under high performance using the Altair HyperMesh to attain the best mesh model suited for finite element analysis (FEA) on the proposed system. Meanwhile, the numerical model is analyzed by employing LS-DYNA to evaluate the superstructure strength. The numerical model includes detail information about the microstructure and considers wheels and axles as rigid bodies but excludes window glasses, seats, and interior parts. Based on the simulation analysis and proper modifications especially on the rear portion of the bus, the local stiffness significantly increased. The vehicle is rotated to the contact point on the ground based on the mathematical method presented in this study to save computational cost. The results show that the proposed method of rollover analysis is highly significant not only in bus rollover tests but in crashworthiness studies for other application. The critical impartments in our suggested dual-purpose bus accepted and passed "Economic Commission for Europe (ECE) R66".