• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.1
• /
• pp.82-88
• /
• 2017

This study proposes a new topology for the performance test of a valve consisting of a modular multilevel converter (MMC)-based static synchronous compensator (STATCOM). The conventional valve performance test equipment requires high-voltage AC source of several kV rating because the number of submodules to be tested in a valve should be at least six or eight. However, the power source of the proposed scheme is DC and not AC source. The DC power source voltage range of the proposed test circuit is from several volts to several tens of volts. Therefore, the size and cost for the performance test equipment can be reduced considerably compared with the conventional method. The proposed scheme satisfies the requirements of the IEC 62927 standard. Simulations are conducted for a valve of 50[MVA] MMC-based STATCOM. Experimental results with a scale-downed setup show the validity of the proposed performance test topology.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.21-28
• /
• 2017

PURPOSES : This paper presents a finite element model to accurately represent the soil-post interaction of single guardrail posts in sloping ground. In this study, the maximum lateral resistance of a guardrail post has been investigated under static and dynamic loadings, with respect given to several parameters including post shape, embedment depth, ground inclination, and embedment location of the steel post. METHODS : Because current analytical methods applied to horizontal ground, including Winkler's elastic spring model and the p-y curve method, cannot be directly applied to sloping ground, it is necessary to seek an alternative 3-D finite element model. For this purpose, a 3D FHWA soil model for road-base soils, as constructed using LS-DYNA, has been adopted to estimate the dynamic behavior of single guardrail posts using the pendulum drop test. RESULTS : For a laterally loaded guardrail post near slopes under static and dynamic loadings, the maximum lateral resistance of a guardrail post has been found to be reduced by approximately 12% and 13% relative to the static analysis and pendulum testing, respectively, due to the effects of ground inclination. CONCLUSIONS : It is expected that the proposed soil material model can be applied to guardrail systems installed near slopes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.6
• /
• pp.839-844
• /
• 2012

This experiment was conducted to evaluate the effects of single or multi-particle size limestone on the egg shell quality, egg production, egg quality and feed intake in laying hens. A total of 280 laying hens (ISA brown) were used in this 10-wk trial. Laying hens were randomly assigned to 4 treatments with 14 replications per treatment and 5 adjacent cages as a replication (hens were caged individually). The experimental treatments were: i) L, basal diet+10% large particle limestone; ii) LS1, basal diet+8% large particle limestone+2% small particle limestone; iii) LS2, basal diet+6% large particle limestone+4% small particle limestone; iv) S, basal diet+10% small particle limestone. The egg production was unaffected by dietary treatments. The egg weight in S treatment was lighter than other treatments (p<0.05). The egg specific gravity in S treatment was lower than other treatments (p<0.05). The eggshell strength and eggshell thickness in S treatment were decreased when compared with other dietary treatments (p<0.05). The laying hens in LS1 and LS2 treatment had a higher average feed intake than the other two treatments (p<0.05). Collectively，the dietary multi-particle size limestone supplementation could be as efficient as large particle size limestone.

• Korean Journal of Adult Nursing
• /
• v.14 no.4
• /
• pp.501-509
• /
• 2002

Purpose: This study was performed to identify the illness intrusiveness, quality of life, and their relationships in patients with chronic liver disease. Method: Data was collected using scales of illness intrusiveness developed by Devins et al and Korean health related quality of life (KoQoLS) developed by Shim et al to measure the illness intrusiveness and quality of life from 141 chronic liver disease patients. Result: The total mean score of illness intrusiveness was $38.85{\pm}18.45$. The domain of illness intrusiveness which showed the highest mean score was health ($4.60{\pm}2.02$), and the lowest mean score domain was relationship with spouse ($20.4{\pm}1.69$). The subcategory of KoQoLS which showed the highest mean score was bodily pain ($6.96{\pm}2.98$), and the lowest mean score subcategory was vitality ($2.75{\pm}1.20$). There were negative relationships between illness intrusiveness and KoQoLS in all subcategories. Abovel all, Illness intrusiveness had the strongest negative relationship with role limitation (r=-0.641) among the KoQoLS subcategories. Conclusion: Because the illness intrusiveness had negative influence on the quality of life in patients with chronic liver disease, further research will need to specify detailed illness intrusiveness and to explore influencing factors on quality of life in them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.477-493
• /
• 2020

This study conducted a seasonal survey to analyze the spatio-temporal variations of marine environments and phytoplankton community in Gochang Coastal Waters (GCW) from August 2016 to April 2017. In the results, the water temperature ranged from 2.1℃ to 34.5℃, showing a large seasonal variation, but the salinity changed from 31.14 psu to 32.64 psu. Therefore, the seasonal variations of water types in GCW were mainly determined by water temperature. The phytoplankton community consisted of 53 genera and 86 species, showing a relatively simple distribution. The phytoplankton cell density ranged from 2.2 to 689.2 cells mL^-1, with an average of 577.2 cells mL^-1, which was low in autumn and high in winter. The seasonal succession of phytoplankton dominant species was mainly diatoms during the whole year, Leptocylindrus danicus, Chaetoceros curvisetus, Skeletonema costatum-ls in summer, Paralia sulcata, Eucampia zodiacus in autumn, S. costatum-ls, Thalassiosira nordenskioeldii in winter, and S. costatum-ls, Asterionella glacialis in spring. In other words, the phytoplankton community showed high diversity in GCW throughout the year. According to the PCA, GCW were easily heated and cooled by radiant energy at lower depth, and the seasonal distributions of phytoplankton were determined by the supply of nutrients by re-fuelling of surface sediments due to the seawater mixing such as tidal mixing.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.463-471
• /
• 2003

The results of the APMP (Asia Pacific Metrology Programme) regional intercomparison of acoustic calibrators were reviewed and analyzed. The artefacts used in intercomparison are a sound level calibrator and a pistonphone. The microphones used to measure the output pressure level are 1" and 1/2" standard microphones (LS1P, LS2P) as well as 1" and 1/2" reference microphones (WS1P/F, WS2P/F). The results obtained using standard microphones are satisfactory, but those obtained by the reference microphones, even though E/sub n/ values are within ±1.0, showed great deviations. Such results had come from the inaccurate calibration of reference microphones. By using the correct calibration results which were obtained by the recently established international standards, the new results were very similar to those of the foreign standard institutes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.640-646
• /
• 1997

To determine variations in leaflet length (LL), leaflet width (LW), leaflet size (LS), and leaflet shape index (LSI), and their association with eight agronomic traits, characterization data of 884 soybean accessions which were grown in the autumn of 1992 in Taiwan were analyzed. LL ranged from 4.3 to 14.7 cm, and LW ranged from 2.8 to 9.7 cm. Also, LS (LL $\times$ LW) ranged from 12.1 to 124.6 $\textrm{cm}^2$. The absolute variation of LL, LW, and LS was not large because of limitation in vegetative growth by short day length. None was classified as a large leaflet based on the International Board for Plant Genetic Resources (IBPGR) descriptors. LSI (LL /LW) ranged from 1.21 to 3.06, and three accessions were classified as narrow leaflet. There were differences in ranges and means of LL, LW, LS, and LSI between and within temperate and tropical accessions. LL, LW, LS, and LSI had highly significant positive correlations with seven agronomic traits and highly significant negative correlation with 100-seed weight except LW for all accessions. There was variation in the closeness of association among leaflet traits, and between and within temperate and tropical accessions. Generally, LL, LW, and LS were more closely associated with days to flowering, plant height at $R_1$ and $R_8$, number of pods per plant; LSI was more closely associated with 100-seed weight than other traits.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.24-28
• /
• 2014

With ever rising concerns about saving of fossil fuel resource, there have been an increasing demand for use of energy more efficiently. The electric motor driven inverters can be a great help to improve energy efficiency. They are also used to control the motor speed to the actual need. Therefore the use of them can lead to reduce energy consumption. In particular, the medium voltage(MV) drive systems used for pumps, fans, steel rolling mills and tractions have widespread applications in the industry. They cover power ratings from 0.4MW to 40MW at the MV level of 2.3kV to 13.8kV. The majority of the installed MV drive systems however, are in the 1MW to 4MW range with voltage rating from 3.3kV to 6.6kV. But they are required to reduce size and weight like other power electronic equipments. In this paper, we studied on the 3.3kV(105A) compact rack type inverter system for improving the cooling efficiency. At first, we confirmed the tendency of temperature with computational simulation using ANSYS ICEPAK and actual experimental tests. And then we researched thermal performance improvement designs in order to reduce temperature of the transformer for the safe operation. It can reduce temperature of transformer that using pipe type flow guide in the system. As a result, we found out more efficient solution by thermal-fluid analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.43-49
• /
• 2005

The package used to transport radioactive materials, which is called by the shipping cask, must be safe under normal and hypothetical accident conditions. These requirements for the cask design must be verified through test or finite element analysis. Since the cost for FE analysis is less than the one for test, the verification by FE analysis is mainly used. But due to the complexity of mechanical behaviors, the results depend on how users apply the codes and can cause severe errors during analysis. In this paper, finite element analysis is carried out for the 9 meters free drop condition of the hypothetical accident conditions using LS-DYNA3D and ABAQUS/Explicit. We have investigated the analyzing technique lot the free drop impact test of the cask and investigated several vulnerable cases. The analyzed results were compared with each other. We have suggested a reliable and relatively simple analysis technique for the drop test of spent nuclear fuel casks.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.595-607
• /
• 2004

Networks often evolve to provide a host with multiple access points to the Internet. In this paper, we propose a transport layer load distribution mechanism utilizing the multiple network interfaces simultaneously. We specifically propose an extension of Stream Control Transmission Protoco1 (SCTP) to have load sharing over multiple network interfaces. We named the particular service provided by the Proposed load sharing mechanism to be LS (Load Sharing) mode service. LS mode service is based on the following four key elements: (i) the separation of flow control and congestion control, (ii) congestion window based striping, (iii) redundant packet retransmission for fast packet loss recovery, (iv) a novel mechanism to keep track of the receiver window size with the SACKS even if they arrive out-of-order. Through simulations, it is shown that the proposed LS mode service can aggregate the bandwidth of multiple paths almost ideally despite of the disparity in their bandwidth. When a path with a delay of 100% greater is utilized as the second path, the throughput is enhanced about 20%.