• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.4 s.44
• /
• pp.43-54
• /
• 2005

This paper presents cost-effectiveness evaluation of semi-active control system for cable-stayed bridge under earthquake excitations with various magnitudes and frequency contents. Semi-active control system, which is operated by using Bi-stale control method on the basis of linear quadratic Gaussian (LQG) optimal controller, is designed for the benchmark control problem proposed by Dyke et at. The cost-effectiveness of the proposed control system is defined by the ratio of life-cycle costs between a bridge structure with shock transmission units and a bridge structure with the semi-active control devices. The simulated results show that the damper cost has little influence on the cost-effectiveness of the semi-active control system while the cost-effectiveness is quite sensitive to the damage cost induced by the bridge failure. It is also found that the semi-active control system guarantees relatively high cost-effectiveness for the cable-stayed bridge subject to the ground motions in the regions of moderate seismicity with soft soil condition and strong seismicity with stiff soil condition.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.37-46
• /
• 2001

In this research, a controller design method based on optimization is proposed that can satisfy constraints on maximum responses of building structures subject to around excitation modeled by partially stochastic process. The class of controllers to be optimized is restricted to LQR. Weighting matrix on controlled outputs is used as design variable. Objective function, constraint functions and their gradients are computed by the parameterization of control gain with Riccati matrix. Full state feedback controllers designed by proposed optimization method satisfy various design objectives and their necessary maximum control forces are computed for the production of actuator. LQG controllers composed of Kalman filter and LQR designed by proposed method perform well with little deterioration. So it is possible to design output feedback controllers satisfying constraints on various maximum responses of structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.240-245
• /
• 1995

제어이론의 역사적 발전사를 고찰해보면 1930년대부터 1960년대까지를 고전 제어(classical control) 시대로 분류되고 이때 주로 사용되었던 용어들은 주파수역(frequency domain)에서 사용된 개념인 극점(pole), 영점(zero), Nyquist, 근궤적(root-Locus) 선도(plot)등으로 대표된다. 그 다음단계인 현대 제어(modern control) 시대 (1960년대-1980년대)때는 새로운 개념들이 도입 되었는데 시간역(time domain)에서 사용되는 상태공간(state-space) 모델, 가제어성(controllability), 가관측성(observability), Kalman 필터, LQG 제어 등이다. 1980년대부터 현재까지를 강인제어(robust control) 시대로 분류하는데 이것의 특징들은 극점이나 영점 대신 상태공간 모델을 사용하여 주파수역에서 정의되는 개념들인 H$_{\infty}$ 합성법, .$\mu$ 해석법, LQG/LTR 및 QFT, Lyapunov 등으로 대표된다. 현대제어시대때는 제어기 K는 공칭 플랜트 모델 G$_{0}$를 기준으로 설계되었으나 실제로 공칭 플랜트 모델은 실제 플랜트와 항상 같을 수가 없었다. 따라서 실제 플랜트 G는 G=G$_{0}$ + .DELTA.G로 표현되며 여기서 .DELTA.G는 플랜트 불 확실성(plant uncertainty), 즉 실제 플랜트와 공칭 플랜트의 차이를 나타낸 다. 이 플랜트 불확실성은 제어기가 실제 응용되어 사용되었을 때 제대로 작동하지 않는 주요 이유중에 하나이다. 이와 같은 상황에서 안정도 강인성 (stability robustness) 및 성능 강인성(performance rosubtness)의 보장은 상 당히 중요한 문제로 대두되었으며 주어진 플랜트 불확실성하에서 이러한 강이성들이 보장되는 제어이론들 중 H$_{\infty}$ 제어이론이 많이 연구/응용 되고 있다. 특히 공칭 플랜트 모델과 함께 사용되는 플랜트 모델과 함께 사용되는 플랜트 불확실성 모델은 직접적으로 성능 및 안정도에 영향을 미치므로 주의 깊게 선정해야 한다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.38-45
• /
• 1999

In this paper, A novel approach on $H_{\infty}-LTR$ design scheme is presented. The proposed scheme provides a design toll which can trade-off the recovery error against the control input. In the first stage, Kalman filter is designed to shape the loop to satisfy the required performance specifications. The designed Kalman filter, together with the plant transfer function, is used as a target transfer function. In the second stage, sensitivity function weighted $H_{\infty}-LTR$suboptimal LTR is designed to recover the target loop transfer function. Simulation results of LQG/LTR, $H_{\infty}-LTR$are compared to demonstrate the good property of the proposed scheme.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.127-135
• /
• 1999

Multivarialbe Boiler-Turbine H_\infty Control System Genetic Algorithm Weighting Functions $W_1$(s), $W_2$(s), and design parameter $\gamma$ that are given by Glover-Doyle algorithm, to optimally follow the output of reference model. The first method to do this is that the gains of weighting functions $W_1$(s), $W_2$(s), and design parameter are optimized simultaneously by genetic algorithm with the tournament method that can search more diversely, in the search domain which guarantees the robust stability of system. And the second method is that not only by genetic algorithm with the roulette-wheel method that can search more fast, in that search domain. The boiler-turbine H_\infty control system designed by theabove second method has not only the robust stability to a modeling error but also the the better command tracking preformance than those of the H_\infty control system designed by trial-and-error method and the above first method. Also, this boiler-turbine H_\infty control system has the better performance than that of the LQG/LTR contro lsystem. The effectiveness of this boiler-turbineH_\infty control system is verified by computer simulation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.77-84
• /
• 1998

The temperature difference occurs at the test points of chamber, because the traditional Test Handler consists of a heater and a fan. To reduce the temperature variation at different points in the chamber, we divided the heater to three parts which are controlled independently. First, we identified the chamber's parameter and then designed a LQG controllers by the identification model. RTD sensors and VME system were used to construct the temperature control system. In our experiment for the proposed control system, the temperature variation was reduced from ${\pm}1.5^{\circ}C$ to ${\pm}0.35^{\circ}C$ at 50$^{\circ}C$ ${\cdot}$ 80$^{\circ}C$ and 120$^{\circ}C$.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.746-753
• /
• 2008

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.

• Smart Structures and Systems
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2019

Control algorithms are the most important aspects in successful control of structures against earthquakes. In recent years, intelligent control methods rather than classical control methods have been more considered by researchers, due to some specific capabilities such as handling nonlinear and complex systems, adaptability, and robustness to errors and uncertainties. However, due to lack of learning ability of fuzzy controller, it is used in combination with a genetic algorithm, which in turn suffers from some problems like premature convergence around an incorrect target. Therefore in this research, the introduction and design of the Fuzzy Cooperative Coevolution (Fuzzy CoCo) controller and Adaptive Neural-Fuzzy Inference System (ANFIS) have been innovatively presented for semi-active seismic control. In this research, in order to improve the seismic behavior of structures, a semi-active control of building using Magneto Rheological (MR) damper is proposed to determine input voltage of Magneto Rheological (MR) dampers using ANFIS and Fuzzy CoCo. Genetic Algorithm (GA) is used to optimize the performance of controllers. In this paper, the design of controllers is based on the reduction of the Park-Ang damage index. In order to assess the effectiveness of the designed control system, its function is numerically studied on a 9-story benchmark building, and is compared to those of a Wavelet Neural Network (WNN), fuzzy logic controller optimized by genetic algorithm (GAFLC), Linear Quadratic Gaussian (LQG) and Clipped Optimal Control (COC) systems in terms of seismic performance. The results showed desirable performance of the ANFIS and Fuzzy CoCo controllers in considerably reducing the structure responses under different earthquakes; for instance ANFIS and Fuzzy CoCo controllers showed respectively 38 and 46% reductions in peak inter-story drift ($J_1$) compared to the LQG controller; 30 and 39% reductions in $J_1$ compared to the COC controller and 3 and 16% reductions in $J_1$ compared to the GAFLC controller. When compared to other controllers, one can conclude that Fuzzy CoCo controller performs better.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.523-533
• /
• 2009

The purpose of the present study is to examine the dynamic interaction characteristics between moving maglev vehicle and guideway bridge system. For this purpose, the dynamic governing equation of 2-dof maglev vehicle using optimal feedback control scheme of LQG was derived with or without consideration of the dynamic interaction between vehicle and guideway bridge system. From the parametric study, it was found that the dynamic interaction effect between bridge and vehicle was large in case of neglecting the railway roughness effect. But if the railway roughness effect was considered, it was observed two analysis results with or without consideration of the dynamic interaction did not show big difference. As a conclusion, it is required to take into account the dynamic interaction effect of bridge and maglev vehicle and the railway roughness for precise evaluation of runnability of maglev vehicle and impact factor of guideway.

• Structural Engineering and Mechanics
• /
• v.52 no.2
• /
• pp.275-290
• /
• 2014

In this paper, Simple Adaptive Control (SAC) method is used to mitigate the detrimental effects of earthquakes on MR-damper equipped structures. Acceleration Feedback (AF) is utilized since measuring the acceleration response of structures is known to be reliable and inexpensive. The SAC is simple, fast and as an adaptive control scheme, is immune against the effects of plant and environmental uncertainties. In the present study, in order to translate the desired control force into an applicable MR damper command voltage, a neural network inverse model is trained, validated and used through the simulations. The effectiveness of the proposed AF-based SAC control system is compared with optimal H2/LQG controllers through numerical investigation of a three-story model building. The results indicate that the SAC controller is substantially effective and reliable in both undamaged and damaged structural states, specifically in reducing acceleration responses of seismically excited buildings.