• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.65-73
• /
• 2015

This paper considers a parallel-machine scheduling problem with dedicated and common processing machines using GA (Genetic Algorithm). Non-identical setup times, processing times and order lot size are assumed for each machine. The GA is proposed to minimize the total-tardiness objective measure. In this paper, heuristic algorithms including EDD (Earliest Due-Date), SPT (Shortest Processing Time) and LPT (Longest Processing Time) are compared with GA. The effectiveness and suitability of the GA are derived and tested through computational experiments.

• Journal of Aerospace System Engineering
• /
• v.3 no.4
• /
• pp.19-27
• /
• 2009

ITB(Interstage Turbine Burner) is a kind of afterburner locating between HPT(High Pressure Turbine) and LPT(Low Pressure Turbine). The objective of this study is to use the engine's design parameters as input parameters to obtain engine's performance parameters, such as specific thrust and its thrust specific fuel consumption. This study analyzes the performance of Turbofan engines with ITB and compares the performance between Turbofan engines with ITB and Turbofan engines without ITB. Results of this study can verify the advantages of Turbofan engine with ITB in term of thrust, efficiency.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2019

Gram-negative pathogens, such as Klebsiella pneumoniae, Pseudomonas aeruginosa, and Acinetobacter baumannii, pose a serious threat to public health worldwide, due to high rates of antibiotic resistance and the lack of development of novel antimicrobial agents targeting Gram-negative bacteria. The outer membrane (OM) of Gram-negative bacteria is a unique architecture that acts as a potent permeability barrier against toxic molecules, such as antibiotics. The OM is composed of phospholipids, lipopolysaccharide (LPS), outer membrane ${\beta}-barrel$ proteins (OMP), and lipoproteins. These components are synthesized in the cytoplasm or in the inner membrane, and are then selectively transported to the OM by the specific transport machines, including the Lol, BAM, and Lpt pathways. In this review, we summarize recent studies on the assembly systems of OM components and analyze studies for the development of inhibitors that target these systems. These analyses show that OM assembly machines have the potential to be a novel attractive drug target of Gram-negative bacteria.

• Journal of Korea Water Resources Association
• /
• v.52 no.12
• /
• pp.1047-1055
• /
• 2019

Various types of numerical modeling techniques are used to predict the behavior of pollutants under various water environmental conditions in the event of a water pollutant accident. Among them, a hydraulic model that can consider water flow characteristics is the most basic and very important. The process of evaluating whether the hydraulic model accurately predicts the applied river characteristics is very important. In the verification of the modeling result, the measuring data are often used in the river. Currently, ADCP and FlowTrackers are widely used to measure the flow velocity of rivers. However, ADCP is not accurate when the depth is less than 0.6 m and also when the ratio of irreversibility near the surface is more than 40%. Futhermore, FlowTracker has a limitation in measuring at high depth and high velocity due to the direct measurement method in rivers. Simuation results, which are validated by these methods, are not reliable for low depth conditions of low flowrate and high velocity conditions of high flowrate. In this study, Lagrangian GPS floaters which measures physical quantity of water according to particle movement is used without the conventional method measured by Eulerian technique. The verification method of the model results was studied by comparing the simulation results of the hydraulic model with the velocities measured using the GPS floaters. When comparing the traveling distance of the GPS floaters with the traveling distance of the LPT simulations, the average error rate was 13.6% on distances, and the average error rate was 3.2% on velocities except for the stagnant section. Therefore, GPS floaters can be used for a correction and verification method of hydraulic model simulations.

• Journal of Korean Society on Water Environment
• /
• v.32 no.3
• /
• pp.243-252
• /
• 2016

In cases of water pollution accidents, accurate prediction for arrival time and concentration of contaminants in a river is essential to take proper measures and minimize their impact on downstream water intake facilities. It is critical to fully understand the behavior characteristics of contaminants on river surface, especially in case of oil spill accidents. Therefore, in this study, the effects of main parameters of advection and diffusion of contaminants were analyzed and validated by comparing the results of Lagrangian particle tracking (LPT) simulation of Environmental Fluid Dynamic Code (EFDC) model with those of Global Position System (GPS)-equipped drifter experiment. Prevention scenario modeling was accomplished by taking cases of movable weir operation into account. The simulated water level and flow velocity fluctuations agreed well with observations. There was no significant difference in the speed of surface particle movement between 5 and 10 layer modeling. Therefore, 5 layer modeling could be chosen to reduce computational time. It was found that full three dimensional modeling simulated wind effects on surface particle movements more sensitively than depth-averaged two dimensional modeling. The diffusion range of particles was linearly proportional to horizontal diffusivity by sensitivity analysis. Horizontal diffusivity estimated from the results of GPS-equipped drifter experiment was 0.096 m²/sec, which was considered to be valid for applying the LPT module in this area. Finally, the scenario analysis results showed that particle movements could be stagnant when discharge from the upstream weir was reduced, implying the possibility of securing time for mitigation actions such as oil boom installation and wiping oil contaminants. The outcomes of this study can help improve the prediction accuracy of particle tracking simulation to establish the most suitable mitigation plan considering the combination of movable weir operation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.247-259
• /
• 2017

Numerical model with LPT (Lagrangian Particle Tracking) module was used to understand the variation of residence time in the outer sea of the Sihwa lake result operating from the Sihwa tidal power plant. Numerical model was composed in order to investigate the spatial distribution characteristics, the average residence time in each area was calculated by dividing the outer sea area of Sihwa lake into 4 areas. The average residence time of the areas appeared to be increase as it entered the areas located in the inner bay (13 days) from the area located in most outer sea (3 days) both before and during operation. Variation of average residence time by areas were increased in the area that was located in the most outer sea of during operation compared to before operation, and decreased in the other area. Artificial discharges from tidal power plant induces particle traps in the formation of vortex in the area located in the most outer seas, entrainment in the remaining areas, which affects variation in residence time. In other words, the jet flow generated during drainage and the change in the residence time due to the vortex and entrainment action indicate the increase horizontal mixing of water in the outer sea and in the inner bay.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.9
• /
• pp.1593-1602
• /
• 2001

본 연구는 스포츠 아우터웨어용 나일론 직물의 소리에 대한 주관적 감각과 이에 관련된 객관적 측정치를 규명하기 위하여, 서로 다른 8종의 나일론 직물의 소리의 스펙트럼 파형을 고찰하였으며, 소리 파라미터로 총음압(level pressure of total sound, LPT),세 가지 AR (autoregressive)계수, Zwicker의 심리음향학적 모델에 따른 크기(Z)와 날카로움(Z)를 계산하였고, Kawabata Evaluation System(KES)으로 직물의 물리적 성질을 측정하였다. 주관적 감각 평가를 위하여 피험자에게 녹음된 각 직물소리를 들려주어 7개 소리 감각 (부드러움, 시끄러움, 날카로움, 맑음, 거 침, 높음, 유쾌함)을 의미분별척도로 답하게 한 후, 단계적 선형 회귀식을 이용하여 직물 소리의 주관적 감각에 대한 예측 모델을 제시하였다. 울트라스웨이드를 제외한 태피터 나일론 직물들은 스펙트럼 파형 에서 다른 조성 섬유의 직물들보다 음압 값이 높고, 총음압이 60dB 안팎의 값을 보여, 착용자에게 불쾌감을 줄 것으로 예상되었으며, 주관적 감각 평가에서도 소리의 부드러움과 맑음, 유쾌함에서 음의 점수를, 시끄러움과 날카로움, 거침, 높음에서 양의 점수를 얻었다. 주관적 감각의 예측모델에서 총음압은 시끄러움과 거침에 정적 영향을, 유쾌함에 부적 영향을 미쳐서 나일론 직물 소리의 총음압이 50dB 이하일 때 주관적으로 유쾌하게 느껴지는 것으로 나타났다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.65-72
• /
• 1994

We resolve the suboptimal $\infty$ control problem using (J,J')-lossless coprime factorization by transforming the linear fractional transformation (LFT) into chain scattering description (CSD) in discrete-time systems. The condition transformed LFT into CSD is that the inverse matrix of $P_{21}$ of standard plant exists. But, this paper presents the method of transforming LFT into CSD for 4-block problem in case that the inverse matrix of $P_{21}$ of standard plant does not exist and parameterization of the all suboptimal $\infty$T controllers using (J,J')-lossless coprime factorization. It is shown that this method can resolve the suboptimal $\infty$ control problem solving only two Riccati equations in discrete-time systems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.2
• /
• pp.44-50
• /
• 2007

This paper deals with the problem of scheduling jobs and rate-modifying activities on parallel machines. A rate-modifying activity is an activity that changes the production rate of equipment such as maintenance and readjustment. If a job is scheduled after the rate-modifying activity, then the processing time varies depending on the modifying rate of the activity. In this study, we extend the single machine problem to parallel machines problem and propose algorithms is to schedule the rate-modifying activities and jobs to minimize the makespan on parallel machines which is NP-hard. We propose a branch and bound algorithm with three lower bounds to solve medium size problems optimally. Also we develop three heuristics, Modified Longest Processing Time, Modified MULTIFIT and Modified COMBINE algorithms to solve large size problems. The test results show that branch and bound algorithm finds the optimal solution in a reasonable time for medium size problems (up to 15 jobs and 5 machines). For large size problem, Modified COMBINE and Modified MULTIFIT algorithms outperform Modified LPT algorithm in terms of solution quality.