• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1093-1098
• /
• 2007

In designing the high-speed railroad track, it is important to utilize appropriate track components to maintain uniform stiffness and ensure track alignment within the tolerance set for that system. In this regard, continuous welded rails (CWRs) were introduced to the Korean railways. Yet the installation of CWRs can result in an adverse impact due to the track/structure interaction on bridge sections yielding variations in the stiffness at the expansion joints. It may also impose additional axial force, generate excessive stress or deflection on track, and loosen the ballast at the ends as a bridge deck contracts or expands owing to a thermally-induced dynamic response. The risk is even greater in a long bridge deck, resulting in track longitudinal irregularities, deteriorating passenger's comfort, and increasing maintenance efforts. This study evaluates the performance of ZLR and their impact on track longitudinal irregularities through the track measuring results on a test section installed the ZLR in order to minimize the thermally-induced responses and the maintenance efforts for the high speed railway bridges.

• Archives of Reconstructive Microsurgery
• /
• v.7 no.2
• /
• pp.88-94
• /
• 1998

Free vascularized fibular transplantation is one of the most useful living bone reconstructive procedure in microsurgical field. Concerning about donor site morbidity, the donor has minor problems of ankle stability and muscle power weakness and transient peroneal nerve symptoms. That problems can be minimized with longitudinal splitted osteotomy on the donor fibula if the bone defect in recipient site is not so large. Half splitted fibula with peroneal arterial pedicle which contains nutrient artery and periosteal vessels, grafted bone can survive with those vascular supplies. Authors underwent five cases of half splitted free vascularized fibular transplantation from 1985. There were no evidence of devascularization in all cases, we can minimized donor morbidity with leaving half fibula intact on donor site. The problem of that technique is technically demanding in longitudinal splitting of bone without damage to peroneal nutrient vessels and periosteal soft tissues which attached to the bone. Authors can propose longitudinal half fibular transplantation is one of modification in free vascularized bone transplantation that minimize donor defect.

• Journal of Welding and Joining
• /
• v.23 no.3
• /
• pp.47-53
• /
• 2005

Longitudinal deformation is produced by fillet welding during the fabrication of built-up beams and decreases productivity and quality because it needs an extra correcting process. The deformation is caused by welding moment, which is the value multiplied the welding shrinking farce by the distance from the neutral axis. This welding moment can be offset by generating a moment in the same magnitude and in an opposite direction by induction heating. The location and quantity of the induction heating are decided via experiments and simple equations. This study, first, clarifies the creation mechanism of the longitudinal deformation with FEM analysis. Then, we presents the preventive method of this deformation by induction heating basing on the mechanism and verifies its validity through analysis and experiments.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.121-126
• /
• 2003

The objective of this research is to evaluate of seismic performance for reinforced concrete bridge piers with lap splices of longitudinal reinforcement steels using predicting of nonlinear hysteric behavior. For the purpose, enhanced analytical trilinear hystretic model has been proposed to simulate the force-displacement hysteretic curve of RC bridge piers under repeated reversal loads. The moment capacity and corresponding curvature in the plastic hinge have been determined, and the enhanced hysteretic behavior model by five different kinds of branches has been proposed for modeling the stiffness variation of RC section under cyclic loading. The strength and stiffness degradation index are introduced to compute the hysteretic curve for various confinement steel ratios, In addition, the modified curvature factor has been introduced to forecast of seismic performance of longitudinal steel lap spliced and retrofitted specimens. The results of this research will be useful to predict of seismic performance for longitudinal steel with lap spliced and its retrofitted specimens.

• Korean Journal of Child Studies
• /
• v.37 no.6
• /
• pp.5-17
• /
• 2016

Objective: This study focused on the longitudinal associations between self-esteem and peer relationships in Korean adolescents while considering gender and timing-early and late adolescence-differences. Methods: The study made use of data from the Korean Children and Youth Panel Survey. Three waves of data collected from 2,351 adolescents were analyzed by means of autoregressive cross-lagged modeling. Results: The results indicated that self-esteem predicted subsequent changes in peer relationship but not vice versa. Further, the results that longitudinal associations between self-esteem and peer relationships differed between male and female adolescents and between early and late adolescence. Conclusion: The findings revaluated the longitudinal relationship between self-esteem and peer relationships. Both gender and timing should be considered when planning interventions related issues about self-esteem and peer relationships in adolescence.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.1-5
• /
• 2014

Conoscopic holography, which consists of two circular polarizers and an uniaxial crystal, is incoherent holographic technology for three-dimensional display and non-contact diagnosis. In this paper, we derive the longitudinal and lateral intensities from point-source hologram made by conoscopic holography. Also, the longitudinal and lateral resolutions of conoscopic holography will be obtained from the longitudinal and lateral intensities, respectively, according to Rayleigh criterion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.802-813
• /
• 2000

This paper represents numerical computations of the interaction between the longitudinal vortex and a flat plate 3-D turbulent boundary layer. In the present study, the main interest is in the behavior of longitudinal vortices introduced in turbulent boundary layers. The flow field behind vortex generator is modeled by the information that is available from studies on the delta winglet. Also, the Reynolds-averaged Navier-Stoke equations for three-dimensional turbulent flows, together with a two-layer turbulence model to resolve the near-wall flow, is solved by the method of pseudo compressibility. The present results show that the boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall, and have a good agreement with the experimental data.

• Journal of Mechanical Science and Technology
• /
• v.15 no.9
• /
• pp.1248-1256
• /
• 2001

In this study, a test bed for vehicle longitudinal control is developed using a chassis dynamometer and real time 3-D graphics. The proposed test bed system consists of a chassis dynamometer on which test vehicle can run longitudinally, a video system that shows virtual driver view, and computers that control the test vehicle and realize the real time 3-D graphics. The purpose of the proposed system is to test vehicle longitudinal control and warning algorithms such as Adaptive Cruise Control(ACC), stop and go systems, and collision warning systems. For acceleration and deceleration situations which only need throttle movements, a vehicle longitudinal spacing control algorithm has been tested on the test bed. The spacing control algorithm has been designed based on sliding mode control and road grade estimation scheme which utilizes the vehicle engine torque map and gear shift information.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.17-23
• /
• 2005

Juvenile and transitional-juvenile wood samples from loblolly pine (Pinus taeda) were immersed in water to investigate longitudinal and tangential swelling properties. Increment cores from twenty-six loblolly pine trees were sampled at breast height (1.37 m). Earlywood rings 5 and 9 were separated from the core, extracted, oven-dried and immersed in water at room temperature. The variance in longitudinal swell was significant for ring 5 compared to ring 9 (p = 0.001). It was found that tangential swell might predict longitudinal swelling of juvenile wood at ring 9 but not at ring 5. Poor correlation in ring 5 suggests that swelling response in younger juvenile wood may differ. The swell response at ring 5 did not follow the shrinkage models discussed in the literature while ring 9 adhered to the expected curve.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1343-1347
• /
• 2006

Non-contact modal testing for longitudinal modes of a pipe is discussed in this work. The suggested method can generate and measure longitudinal vibrations without mechanical contact by using the coupling phenomenon between deformation and magnetic field, known as the magnetostrictive effect. This effect has been used to generate and measure ultrasonic waves, but seldom used to deal with audible vibrations. In this investigation, the validity of the developed method in a typical vibration frequency range is checked with an inconel pipe being used in nuclear power plants.