• Economic and Environmental Geology
• /
• v.33 no.6
• /
• pp.547-556
• /
• 2000

The purpose of this study is to analyze shear fracture system using landslide location occurred 1998 at Janghung area. For the geological implication, foliation was surveyed and analyzed, and location of landslide, geological structure and topography were constructed into spatial database using GIS. With the constructed spatial database, shear fracture system was assessed by the relation analysis between strike and dip of the foliation and aspect and slope of the topography. We compared strike and dip of foliation and aspect and slope of topography and recognized the typical fracture pattern, strike and dip of joint, that coincided with shear fracture system. The result tells us that foliation of gneiss has geometrical relation to joint or fault that leading landslide. GIS was used to analyze vast data efficiently and the result can be used to assess the landslide susceptibility as important factor.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.2
• /
• pp.143-156
• /
• 2005

Facility location planning (FLP) problem is the strategic level planning in supply chain. The FLP is significantly affected by the operation time of each facility. In most of the FLP researches, operation time of facility has been treated as a fixed value. However, the operation time is not a static factor in real situations and the fixed operation time may lead unrealistic FLP. In this paper, a mixed integer programming (MIP) model is proposed for solving the 3-stage FLP problem and operation times are adjusted by the results from the simulation model and an iterative approach combining the analytic model and simulation model is proposed to obtain more realistic operation plans for FLP problems.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.349-358
• /
• 2012

Over a wireless sensor network (WSN), accurate localization of sensor nodes is an important factor in enhancing the association between location information and sensory data. There are many research works on the development of a localization algorithm over three-dimensional (3D) space. Recently, the complexity-reduced 3D trilateration localization approach (COLA), simplifying the 3D computational overhead to 2D trilateration, was proposed. The method provides proper accuracy of location, but it has a high computational cost. Considering practical applications over resource constrained devices, it is necessary to strike a balance between accuracy and computational cost. In this paper, we present a novel 3D localization method based on the received signal strength indicator (RSSI) values of four anchor nodes, which are deployed in the initial setup process. This method provides accurate location estimation results with a reduced computational cost and a smaller number of anchor nodes.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1321-1324
• /
• 2004

Unbalanced systems, such as distribution systems, have difficulties in fault locations due to single-phase laterals and loads. In this paper, a novel fault location algorithm is suggested for a line to line faults using inverse theorem of matrix on electric power lines. The fault location for balanced systems has been studied using the current distribution factor, by a conventional symmetrical transformation, but that for unbalanced systems has not been investigated due to their high complexity The proposed algorithms overcome the limit of the conventional algorithm using the conventional symmetrical transformation, which requires the balanced system and are applicable to any electric power system but are particularly useful for unbalanced distribution systems. The simulation results oriented by the real distribution system are presented to show its effectiveness and accuracy.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.97-104
• /
• 2010

Expanded muti-source Weber problem (EWP), which introduced in this paper, is a reverse logistics network design problem to minimize the total transportation cost from customers thorough regional center to central center. Decision factor of EWP are the locations of regional centers and a central center. We introduce a GRASP heuristics for the EWP. In the suggested GRASP, an expanded iterative location allocation method (EILA) is introduced based on the Cooper's iterative location allocation method[3]. For the initial solution of GRASP, allocation first seed (AFSeed) and location first seed (LFSeed) are developed. The computational experiment for the objective value shows that the LFSeed is better than the AFSeed. Also the calculating time of the LFSeed is better than that of the AFSeed.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.51-62
• /
• 1996

This research utilized the psychophysical methodology, where secrw drivers are used, to determine the effects of i) the location and orientation of work objects, and ii) wearing gloves, on ratings of perceived exertion at various body parts. The validity of the psychophysical methodology in determining a preferred work pace was also studied. The subjects drove screws with a screw driver into thick wooden sheet at three vertical and three horizontal locations. They drove serews for 3 minutes at each location and assessed the condition using the psychophysical scale. The results showed that only the vertical location was a significant factor in determining the discomfort ratings. Driving screws at elbow height on the vertical surface and with the lower arm close to the body on the horizontal surface were the work locations with the smallest ratings of perceived discomfort. Wearing gloves had significant effects on reducing the pain of the hand. From the experiment in which a comfortable work pace was identified using 20 minute psychophysical adjustment, it was found that the psychophysical method is sensitive to workers perception of the physical stress when the upper limbs are employed. This was confirmend by the high correlation between the psychophysical results and EMG measurement.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.588-598
• /
• 2010

Purposes of this research were to examine characteristics of contractors and the relationship between contractors and wholesalers of apparel products. Influence of such variables on wholesalers' satisfaction was also assessed. Location, reputation and service were factors of contractor characteristics. Dependence, cooperation and power were three factors that were considered for contractor-wholesaler relationship variable. Survey data from 109 wholesalers located in Dongdaemun Fashion Town in Korea was used for analysis. Empirical results confirmed the importance of service factor of contractor characteristics. Service and location of the contractor had positive influence on cooperation. Location had negative influence on power. Reputation had positive direct influence on wholesaler satisfaction. Cooperation between contractors and wholesalers had significant influence on wholesaler satisfaction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.92-92
• /
• 2008

The surface flatness of heteroepitaxially grown 3C-SiC thin films is a key factor affecting electronic and mechanical device applications. This paper describes the surface flatness of polycrystalline 3C-SiC thin films by the gas flow control according to the location change of geometric structure. The polycrystalline 3C-SiC thin film was deposited by APCVD(Atmospheric pressure chemical vapor deposition) at $1200^{\circ}C$ using HMDS(Hexamethyildisilane : $Si_2(CH_3)_6)$ as single precursor, and 5 slm Ar as the main flow gas. According to the location of geometric structure, surface fringes and flatness changed. It shows the distribution of thickness is formed uniformly in the specific location of the geometric structure.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.16 no.3
• /
• pp.47-58
• /
• 1989

^x Residential satisfaction by apartment housing type and by location was examined in Seoul Korea for a sample of 303 housewives disaggregated into four housing subgroups. These group differ in their personal characteristic by housing type and location. They showed significant differences in their levels of satisfaction and in their perception and evaluation of several community, neighborhood and housing unit attributes. A regression model of satisfaction for entire sample explain about 45% of the variation, but this conceals the compositional and the contextual differences between groups. Seperate regression for the four groups explain an average of 63% of the variation in residential satisfaction. Residents of high-rise and low-rise apartments both of center and periphery location differ significantly both from each other. Results show that certain dwelling, neighborhood and community context elicit dissatisfaction across the full sample. The objective contextual factor of housing type prove significant in most compositional subsamples, indicating that sources of residential satisfaction are not same in everywhere.

• KIEE International Transactions on Power Engineering
• /
• v.3A no.2
• /
• pp.79-84
• /
• 2003

Unbalanced systems, such as distribution systems, have difficulties in fault locations due to single-phase laterals and loads. This paper proposes new fault locations developed by the direct three-phase circuit analysis algorithms using matrix inverse lemma for the line-to-ground fault case and the line-to-line fault case in unbalanced systems. The fault location for balanced systems has been studied using the current distribution factor, by a conventional symmetrical transformation, but that for unbalanced systems has not been investigated due to their high complexity. The proposed algorithms overcome the limit of the conventional algorithm using the conventional symmetrical transformation, which requires the balanced system and are applicable to any power system but are particularly useful for unbalanced distribution systems. Their effectiveness has been proven through many EMTP simulations.