• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.117-127
• /
• 2024

Purpose: The purpose is to conduct basic research to save energy and improve the safety of manufacturing plant infrastructure by comprehensively monitoring energy management, temperature, humidity, dust and gas, air quality, and machine operation status in small and medium-sized manufacturing plants. Method: To this end, energy-related data and environmental information were collected in real time through digital power meters and IoT sensors, and research was conducted to disseminate and respond to situations for energy saving through monitoring and analysis based on the collected information. Result: We presented an application plan that takes into account energy management, cost reduction, and safety improvement, which are key indicators of ESG management activities. Conclusion: This study utilized various sensor devices and related devices in a smart factory as a practical case study in a company. Based on the information collected through research, a basic system for energy saving and safety improvement was presented.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.220-227
• /
• 2004

Phosphorus desorption study is essential to understanding P behavior in agricultural and environmental soils because phosphorus is considered as two different aspects, a plant nutrient versus an environmental contaminant. This study was conducted to determine soil P buffering power related to P desorption quantity intensity (Q/I) parameters, $Q_{max}$(an index of P release capacity) and $l_0$(an index of the intensity factor), and to investigate the characteristics of relationship between the P desorption Q/I parameters and the soil properties. Soil samples were prepared with treatments of 0 and $100mg\;P\;kg^{-1}$ applied as $KH_2PO_4$ solution. The P desorption Q/I curves were obtained by a procedure using anion exchange resin beads and described by an empirical equation ($Q=aI^{-1}+bln(I+1)+c$). The P desorption Q/I curves for the high available P (${\g}20mg\;kg^{-1}$ of Olsen P) soils were characteristic concave trends with or without soil P enrichment, whereas for the low available P (${\lt}20mg\;kg^{-1}$ of Olsen P) soils, the anticipated Q/I concave curves could not be obtained without a proper amount of P addition. When the soils were enriched in phosphates, the values of desorbed solid phase labile P and solution P, such as $Q_{max}$ and $I_0$ respectively, were increased, but the ratio of $Q_{max}$ versus $I_0$ was decreased. Thus, the slope of desorption Q/I curve represented as phosphorus buffering power, $|BP_0|$, is decreased. The $|BP_0|$ values of the high available P soils ranged between 48 and $61L\;kg^{-1}$ in the P untreated samples and between 18 and $44L\;kg^{-1}$ in the P enriched samples. Overall $|BP_0|$ values of both low and high available P soils treated with $l00mg\;P\;kg^{-1}$ ranged between 14 and $79L\;kg^{-1}$. The $Q_{max}$, values ranged between 71.4 and $173.1mg\;P\;kg^{-1}$, and the lo values ranged between 0.98 and $3.82mg\;P\;L^{-1}$ in the P enriched soils. The $Q_{max}$ and $I_0$ values that control the P buffering power may be not specifically related to a specific soil property, but those values were complicatedly related to soil pH, clay content, soil organic matter content, and lime. Also, phosphorus release activity, however, markedly depended on the desorbability of the applied P as well as the native labile P.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.206-219
• /
• 2021

The warming of the climate is increasing the damage caused by termites to wooden buildings, cultural properties and houses. A group removal system can be installed around the building to detect and remove termite damage; however, if the site is not visited regularly, every one to two months, you cannot observe whether termites have spread within, and it is difficult to take prompt effective action. In addition, since the system is installed and operated in an exposed state for a long period of time, it may be ineffective or damaged, resulting in a loss of function. Furthermore if the system is installed near a cultural site, it may affect the aesthetic environment of the site. In this study, we created a detection system that uses wood, cellulose, magnets, and magnetic sensors to determine whether termites have entered the area. The data was then transferred to a low power LoRa Network which displayed the results without the necessity of visiting the site. The wood was made in the shape of a pile, and holes were made from the top to the bottom to make it easier for termites to enter and produce a cellulose sample. The cellulose sample was made in a cylindrical shape with a magnet wrapped in cellulose and inserted into the top of a hole in the wood. Then, the upper part of the wood pile was covered with a stopper to prevent foreign matter from entering. It also served to block external factors such as light and rainfall, and to create an environment where termites could add cellulose samples. When the cellulose was added by the termites, a space was created around the magnet, causing the magnet to either fall or tilt. The magnetic sensor inside the stopper was fixed on the top of the cellulose sample and measured the change in the distance between the magnet and the sensor according to the movement of the magnet. In outdoor experiments, 11 cellulose samples were inserted into the wood detection system and the termite inflow was confirmed through the movement of the magnet without visiting the site within 5 to 17 days. When making further improvements to the function and operation of the system it in the future, it is possible to confirm that termites have invaded without visiting the site. Then it is also possible to reduce damage and fruiting due to product exposure, and which would improve the condition and appearance of cultural properties.

• Journal of Korean Library and Information Science Society
• /
• v.9
• /
• pp.115-144
• /
• 1982

In ordinary modern wester expression 'the Renaissance' was used to denote the impact made by dead Hellenism civilization in western Christendom, particularly Italian literary and artistic movement at Northern and central Italy in the late medieval period. However, A.J. Toynbee examined the renaissance from the different aspect of view. In his great work "A Study of History" in vol. IX, he succeeded in establishing the theory of historic civilization encounters in space and in time; and in time, civilization of the present and the past or between dead and infant successor contacts on the analogy of parenthood and sonship in the relation of A n.0, pparentation-and-Affiliation. The distinguished his view of 'Renaissance' was illustrated in the sense of encounters between a grown-up civilization and the 'ghost' of its long-dead predecessor. The renaissances (by the process of evocation of ghost of its parent society) has not only one single aspect of literary and artistic field but also in politics, law, science and philosophy, languages and literatures and visual arts, and religion. The main theme of this study is to examine the development of libraries and its historical meaning through Toynbee's literary renaissance. His renaissance of Languages and Literatures has three typical steps: They are: 1st step-to restive the dead literature's remains: 2nd step-to remaster their meaning: 3rd step-to reproduce them in counterfeits... Through its first and second steps, collecting and editing, annotating by compiling an anthology, thesaurus, lexicon or encyclopedia, and in its third step publishing mostly imitation of classics took place. Toynbee depicted the five outstanding eminent representatives of literary renaissance who had a n.0, ppeared on the state of history down to the time of writing. They are: Assurbanipal, Constantine prophyrogenitus, Yung Lo, K'ang Hsi, and Ch'ien Lung and the last four had all been emperors of imperia rediviva. As the result of the examination of these five emperors with three steps of literary renaissance, the common result may be summarized as follows: 1. Those emperors of imperia rediviva interested in intellectual work and study, they also were deeply involved in collecting classics in an ostensible reason. 2. There were strong political intention of collecting materials as an a n.0, ppeasement policy of civilization by transferring scholars energies to an intellectual field. 3. Under the rulers of a resuscitated universal state, the literary renaissance were a product of political plane and that the total size of collection and work were huge. 4. Since there were strong exercise of sovereign power, an active censorship by distortion and elimination was inevitable. 5. There existed newly developed strained atmosphere between grown-up and long-dead parent civilization, whenever the book collection movement had occurred. 6. Over adhesion to the parent civilization caused imitation of classic work and the creative activities were stagnated.stagnated.

• The Korea Journal of Herbology
• /
• v.22 no.1
• /
• pp.71-79
• /
• 2007

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Polygoni Multiflori and Cynanchi Wilfordii Radix. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results: 1. The external characteristics of original plants: Polygonum Multiflorum has alternate leaves, and its flower with white color blooms at the shoot apex or leaf axil. In the other hand, Cynanchum wilfordii has opposite leaves, and its flower with yellowish green color blooms at the leaf axil. 2. The physical characteristics of herbal slates: Polygoni Multiflori Radix is red-brown in outer surface pink-brown in section. In the other hand, Cynanchi Wilfordii Radix is earthly-brown in outer surface greyish white in section. 3. The physical characteristics according to the place of production: Demonstrable difference according to the place of production is not seen. Polygoni Multiflori Radix is brown or dark brown in outer surface, soft $Yellow{\sim}dark$ brown in section. In the other hand, Cynanchi Wilfordii Radix is white in outer surface, $white{\sim}weak$ red in section, and has power type. 4. The internal characteristics: Polygonum multiflorum has hetero-vascular bundle and lignification of cork layer is progressive. In the other hand, Cynanchum wilfordii has not hetero-vascular bundle, and lignification of cork layer is weak. Conclusion: In the future, many fundamental study such as how to discriminate between Polygoni Multiflori Radix and Cynanchi Wilfordii Radix in origin and efficacy will be necessary. Also the standard of discrimination must be specific and distinct in that several kinds of fo-ti has been traded. It is considered the results of this study will be furnish κ I the basis Lo succeeding studies and it is needed to extensive comparative study for the same genus-degree of relatedness.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.63-70
• /
• 2001

We demonstrate the MMIC (monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 GHz local oscillator signals from 14.5 GHz input signals. These devices were designed and fabricated by using the M MIC integration process of $0.1\;{\mu}m$ gate-length PHEMTs (pseudomorphic high electron mobility transistors) and passive components. The measurements showed S11 or -9.2 dB at 145 GHz, S22 of -18.6 dG at 29 GHz and a minimum conversion loss of 18.2 dB at 14.5 GHz with an input power or 6 dBm. Fundamental signal of 14.5 GHz were suppressed below 15.2 dBe compared to the second harmonic signal at the output port, and the isolation characteristics of fundamental signal between the input and the output port were maintained above :i0 dB in the frequency range 10.5 GHz to 18.5 GHz. The chip size of the fabricated MMIC frequency doubler is $1.5{\times}2.2\;mm^2$.

• Journal of Ship and Ocean Technology
• /
• v.5 no.3
• /
• pp.1-13
• /
• 2001

Present-day rules and regulations for the design and construction of ships are almost without exemption of a prescriptive and deterministic nature. Often it is argued that this situation is far from ideal; it does no right to the advances, which have been made during the past decades in engineering tools in marine technology, both in methodology and in computational power. Within IMO this has been realized for some time and has resulted in proposals to use Formal Safety Assessment(FSA) as a tool to improve and to modernize the rule making process. The present paper makes use of elements of the FSA methodology, but instead of working towards generic regulations or requirements, a Risk Assessment Approach, not unlike a 'safety case'; valid for a certain ship or type of ship is worked out. Delft University of Technology investigated the application of safely assessment procedures in ship design, in co-operation with Anthony Veder Shipowners and safety experts from Safely Service Center BV. The ship considered is a semi-pressurized-fully refrigerated LPG carrier. On the basis of the assumption that a major accident occurs, various accident, scenarios were considered and assessed, which would impair the safety of the carrier. In a so-called Risk Matrix, in which accident frequencies versus the consequence of the scenarios are depicted, the calculated risks all appeared lo be in the ALARP('as low as reasonable practicable') region. A number of design alternatives were compared, both on safety merits and cost-effectiveness. The experience gained with this scenario-based approach will be used to establish a set of general requirements for safety assessment techniques in ship design. In the view that assessment results will be most probably presented in a quasi-quantified manner, the requirements are concerned with uniformity of both the safety assessment. These requirements make it possible that valid comparison between various assessment studies can be made. Safety assessment, founded on these requirements, provides a validated and helpful source of data during the coming years, and provides naval architects and engineers with tools experience and data for safety assessment procedures in ship design. However a lot of effort has to be spent in order to make the methods applicable in day-to-day practice.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.381-388
• /
• 2015

In this paper, a wireless video streaming system is designed and implemented for TV white space applications. It consists of a RF transceiver module, a digital modem, a camera, and a LCD screen. A VGA resolution video is captured by a camera, modulated by modem, and transmitted by RF transceiver module, and finally displayed at a destination 2.6-inch LCD screen. The RF transceiver is based on direct-conversion architecture. Image leakage is improved by low pass filtering LO, which successfully covers the TVWS. Also, DC offset problem is solved by current steering techniques which control common mode level at DAC output node. The output power of the transmitter and the minimum sensitivity of the receiver is +10 dBm and -82 dBm, respectively. The channel bandwidth is tunable among 6, 7 and 8 MHz according to regulations and standards. Digital modem is realized in Kintex-7 FPGA. Data rate is 9 Mbps based on QPSK and 512ch OFDM. A VGA video is successfully streamed through the air by using the developed TV white-space RF communication module.