• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.152-159
• /
• 2005

The method of induction noise reduction can be classified by using passive control or active control method. However, the passive control method has a demerit to reduce the effect of noise reduction to low frequency (below) 500Hz) range and to be limited in a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used in LMS (Least-Mean-Square) algorithm because it can obtain the complex transfer function easily in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm could not match if the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve the problem in this study, the Moving Bandpass Filter(MBPF) was proposed and implemented. The ANC using MBPF for the reduction of the induction noise shows that more noise reduction as 4dB than without MBPF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2116-2132
• /
• 1994

In this paper, channel equalization techniques for full-digital HDTV systems are investigated Conventional equalization methods are surveyed and several channel are modeled for computer simulation. A VS-LMS (Variable Step size Least Mean Square) algorithm using the time constant concept is proposed and its performance is compared. Several equalization techniques for HDTV systems are simulated based on various channel models, and their characteristics are analyzed. Also the equalizer using fixed-point operations is simulated and its filter structure suitable for high bit rate transmission is also studied.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2995-2997
• /
• 2005

통신망에서 최적 적응 반향제거기(Echo Canceller; EC)는 반향성분이 길게 존재하는 환경에서도 실시간으로 동작할 수 있도록 알고리즘이 간결하여야 하며, 시간에 따라 빠르게 변하는 동특성의 반향경로에서도 동작을 보장할 수 있도록 빠른 수렴특성을 갖아야 한다. 또한, 전화망에서 수십 [ms] 이상의 지연이 발생 할 경우에도 반향제거 성능이 우수해야 한다. 본 논문에서는 이러한 조건을 만족시키기 위해 오차의 크기에 따라 수렴속도를 가변시키는 오차적응 NLMS(Error-Adaptive NLMS) 알고리즘을 제안하였으며, 시뮬레이션을 통해 일반적으로 사용되는 LMS(Least Mean Square) 알고리즘과 이를 개선한 NLMS(Normalized LMS) 알고리즘과 성능을 비교하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.164-166
• /
• 2008

소음은 현대 사회에서 쉽게 접하게 되는 환경 오염원이다. 능동소음제어(Active Noise Control)는 발생된 소음을 제거하기 위해 구현이 간단한 LMS 알고리즘을 많이 사용하고 있다. 그러나 LMS 알고리즘은 수렴 속도와 소음신호의 변화속도에 따라 발산의 위험을 가지고 있다. 본 논문에서는 이러한 LMS의 문제점을 보완하기 위해 경험 모드 분석법을 이용한 feedback FXLMS(Filtered-X Least Mean Square) 알고리즘을 제안하였다. 소음제거 시스템의 출력단에서 검출된 잔차소음을 경험 모드 분석법(Empirical Mode Decomposition)을 이용하여 IMF 신호들로 분해하고, 분해된 각 신호를 FXLMS 알고리즘을 이용하여 수렴시킨 후, 결과들을 다시 결합하여 소음 제거에 이용하였다. 각각의 IMF 신호를 FXLMS 알고리즘으로 수렴시킬 때 수렴속도에 변화를 주어 소음제거의 효율성을 높였다. 제안한 알고리즘을 Matlab을 이용하여 시뮬레이션하였고 기존의 FXLMS알고리즘보다 향상된 수렴속도 및 안정성을 가짐을 입증하였다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.3
• /
• pp.69-75
• /
• 2008

The objective of this paper is to increase the performance by selecting the optimal value in outputs of two algorithms that are Generlized-Lagrange and LMS(Least Mean Square). This paper presents superior performance by mixed two of conventional algorithm arbitrary. Based on the analysis from various simulation, it is observed that proposed method is better performance in terms of practical WLL(Wireless Local Loop) environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8C
• /
• pp.516-521
• /
• 2011

In this paper, a nonlinear algorithm that maximizes zero-error probability (MZEP) with decision feedback (DF) is proposed to counteract both of severely distorted multi-path fading effect and impulsive noise. The proposed MZEP-DF algorithm has shown the immunity to impulsive noise and the ability of the feedback filter section to cancel the remaining intersymbol interference as well. Compared with the linear MZEP algorithm, it yields above 10 dB enhancement of steady state MSE performance in severely distorted multipath fading channels with impulse noise where the least mean square (LMS) algorithm does not converge below -3dB of MSE.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.22-25
• /
• 2004

In active noise control (ANC) system, the convergence behavior of the Filtered- X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortion in the secondary path as in the power amplifiers (e.g., saturation), loudspeakers and transducers. This distortion may yields degrading the error reduction performance of the ANC systems. In this paper, the authors of this paper propose a more improved and stable FXLMS algorithm to compensate for the undesirable nonlinearity of the secondary-path, whereby the third-order Volterra model was employed for the identification of the nonlinear secondary-path. In particular, the proposed approach was based on the modification of the conventional FXLMS algorithm. Finally, the simulation results showed that the proposed approach yields better convergence property and more stable performance in the ANC systems.

• Journal of information and communication convergence engineering
• /
• v.18 no.2
• /
• pp.88-93
• /
• 2020

The IEEE 802.11p-based wireless access in vehicular environments (WAVE) [1] communication is a method used exclusively for wireless communication on the road. This technique enables information sharing not only among moving vehicles but also between vehicles and infrastructure [2]. As part of WAVE communication, data is transmitted to and from vehicles in motion; in this case, it is difficult to determine the channel accurately in an outdoor environment owing to the Doppler shift [3]. This paper proposes a new channel estimation scheme for enhancing the reception performance of the IEEE 802.11p-based WAVE system. The proposed technique obtains the initial channel value by estimating the least square in the time domain by inserting a pilot signal for channel estimation into the IEEE 802.11p virtual subcarrier. Subsequently, a least mean square algorithm is applied to the initial channel value to update the estimated channel value. The simulation results obtained using the proposed channel estimation technique confirm its remarkable efficiency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2005

Ultrasonic inspection methods are widely used for detecting flaws in materials. The signal analysis step plays a crucial part in the data interpretation process. A number of signal processing methods have been proposed to classify ultrasonic flaw signals. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature spare. This paper describes an alternative approach which uses the least mean square (LMS) method and exportation maximization (EM) algorithm with the model based deconvolution which is employed for classifying nondestructive evaluation (NDE) signals from steam generator tubes in a nuclear power plant. The signals due to cracks and deposits are not significantly different. These signals must be discriminated to prevent from happening a huge disaster such as contamination of water or explosion. A model based deconvolution has been described to facilitate comparison of classification results. The method uses the space alternating generalized expectation maximiBation (SAGE) algorithm ill conjunction with the Newton-Raphson method which uses the Hessian parameter resulting in fast convergence to estimate the time of flight and the distance between the tube wall and the ultrasonic sensor. Results using these schemes for the classification of ultrasonic signals from cracks and deposits within steam generator tubes are presented and showed a reasonable performances.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.46-54
• /
• 2021

In this paper, active noise control was performed to reduce radiated noise in the low frequency band of dishwashers. First, through an analysis of the noise environment of the dishwasher, it was confirmed that the pump noise contributed the most to the radiated noise in the low frequency band, From the result of the noise environment analysis, the reference signal was selected to be the vibration signal of the pump body. The reference signal was obtained by using the accelerometer on the pump body, which can prevent acoustic feedback. The error signal sensor was selected as a microphone located at 1 m in front of the dishwasher and 0.5 m in height. And to design the controller, the error signal and the reference signal were measured at the operational rpms of the dishwasher at 2,500 rpm, 2,600 rpm and 2,800 rpm, and the secondary path transfer function was measured. The designed controller was mounted on Digital Signal Processor (DSP) equipment, and the control performance was verified experimentally. As a result of the measurement at the 3 operational rpms, the 7th multiple component of pump operating frequency decreased by 1.93 dB, 4.43 dB, 5.15 dB per rpm, and the 12th multiple component decreased by 6.67 dB, 2.34 dB, 4.28 dB per rpm. And overall Sound Pressure Level (SPL) decreased by 0.84 dB, 2.58 dB, 1.48 dB by rpm.