• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.172-173
• /
• 2011

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.197-204
• /
• 2006

The purpose of this study was to investigate the relationship between the cumulative fatigue of trunk muscles and the period of recovery time during repetitive lifting and lowering task with two different frequencies(4 times/min and 6 times/ min). Eight healthy males with no prior history of LBD(low back disorders) volunteered for this study. Subjects had 2, 3, 4, and 5 minutes recovery time respectively while they were preforming the lifting and lowering task at 15% level of MVC. EMG signals from six trunk muscles were collected and the fatigue level was analyzed quantitatively. In results, the fatigue levels of LES(left elector spinae), RLD(right lattissimus dorsi), LLD(left lattissimus dorsi), RRA(right rectus abdominis) and LRA(left rectus abdominis) were recovered when 3 minutes recovery time was given at 4 times/min frequency. However, the fatgue level of RES(right elector spinae) was recovered when 4 minutes recovery was given. On the other hand, when 6 times/min frequency was used, the RLD, LLD, RRA and LRA were recovered at 5 minutes of recovery time. But for RES and LES, it took longer than 5 minutes to be recovered. This results can be applied to design the adequate length of recovery time to control the cumulative fatigue of trunk muscles in industry with repetitive lifting and lowering task.

• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2011

The main goals of treatment of malignant bone tumor are the prolongation of life survival and the improvement of quality of life. In growing children, however, leg length discrepancy (LLD) is one of major problem in the treatment of malignant bone tumors. Therefore, the precise understanding of growth in children is essential, and the prediction of LLD is critical in deciding the time and options of surgery. In addition, to use the adequate method of growth expectation, periodic follow-up and collaboration with patient's parents are needed.

• IE interfaces
• /
• v.21 no.3
• /
• pp.294-301
• /
• 2008

Agile and flexible manufacturing systems make it mandatory that a control program should have features such as agility, flexibility, and reusability in order to run manufacturing unit smoothly. PLCs are the most frequently used control program in manufacturing systems. PLC programs are mostly programmed by subcontraction, which makes correction of code very difficult. As a result, it may cause delay during down time and ramp up time which leads to big loss of revenue and goodwill. To prevent delay during the times, this paper proposes systematic process analysis and application method for programmable logic controller like LLD (Ladder Logic Diagram). The proposed method uses modified human-error investing techniques for documentation and transforming technique to program LLD from the documentation. Furthermore, this paper demonstrates an example of piston mechanism to explain the proposed method.

• The Journal of Korean Physical Therapy
• /
• v.31 no.6
• /
• pp.368-371
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of leg length discrepancy on kinematic changes of the pelvis and hip during gait. Methods: A total of ten healthy women with no history of neurological, musculoskeletal surgery or injuries, or pain in the lower limbs were recruited. They were assigned to two groups; the experimental group (LLD) consisting of five subjects leg length discrepancy of 10mm to 18mm and the control group (CON) consisting of five subjects leg length discrepancy of<10 mm. All participants were instructed to perform three walking trials for further analysis by using the Cortex 3.0 software program. Independent T-test and Mann-Whitney test were used to examine the effects of mild LLD on kinematic changes of the pelvis and hip during gait. Results: Angles of hip flexion, hip abduction, pelvic obliquity, and pelvic tilt in the experimental group were not significantly different compared to those of the control group. Conclusion: Mild leg length discrepancy induces kinematic changes in the lower limbs, including decreased hip flexion, increased hip abduction, and increased pelvic obliquity in the shorter limb, and increased hip adduction and increased pelvic obliquity in the longer limb. However, those changes were not significant.

• Hip & pelvis
• /
• v.30 no.4
• /
• pp.241-253
• /
• 2018

Purpose: This study was conducted to compare cemented and cementless bipolar hemiarthroplasty in elderly patients with unstable intertrochanteric fractures via meta-analysis and systematic review of relevant studies. Materials and Methods: Systematic review and meta-analysis were performed on 31 available clinical studies; 19 of these studies used cemented stems, 12 used cementless stems, one used both types of stems, and two studies involved a comparative analysis of both stem types. Results: There were statistically significant differences in rates of leg length discrepancy (LLD) greater than 1 cm between the cemented (event rate, 0.089) and cementless groups (event rate, 0.015 and 0.047; P=0.03). Conclusion: Cemented bipolar hemiarthroplasty and cementless bipolar hemiarthroplasty performed on elderly patients with unstable intertrochanteric fracture revealed similar mortality and complication rates; however, the rate of LLD greater than 1 cm was significantly higher in the cemented group compared with the cementless group.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.127-130
• /
• 2004

Analytical sensitivity on TDM test is the lowest concentration that can be distinguished from background noise. The aim of study was to evaluate analytical sensitivity that is also referred to as the lower limit of detection(LLD) about difference between zero calibrator and isotonic saline sample. We tested for 10 days with zero calibrators and 0.85% saline samples while running trilevel control samples under control. Raw data divided by two groups calculated mean and standard deviation from two sample populations and analytical sensitivity by ${\bar{X}}+2SD$. In comparison with isotonic saline samples and zero calibrators, there were significant differences in phenytoin, phenobarbital and vancomycin, etc. Especially analytical sensitivity on phenytoin is at the same level as the upper limit of analytical measurement range with $40{\mu}g/mL$. We think the cause of this is matrix interference. In conclusion, we were sure that standard protocol for analytical sensitivity as lower limit of analytical measurement range on TDM test must be measured with zero standard rather than an isotonic saline sample and type 1 reagent DW for reducing matrix effects within interactions between different materials in a mixture.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.299-302
• /
• 1994

At a nuclear power plant, environmental radioactivity monitoring is routine work for the radiation safety management For the environmental monitoring of tritium($^3$H) activity in water sampled liquid scintillation counting( LSC) method is applied to measure low- energy beta activity from tritium in the samples. The $^3$H activity is measured using the BECKMAN 5801 system at the KRISS( Korea Research Institute of Standards and Science) for evaluating the lower limits of detection( LLD) of $^3$H measurement and the measuring capability of low-level $^3$H activity at four nuclear Power Plant sites. The LSC systems used for low-level $^3$H activity measurements at the nuclear Power Plants are confirmed to satisfy throughout an intercomparison study under the experimental arrangements by the KRISS.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2153-2155
• /
• 2000

The not an organization a branch stream the maintenance factor class on a class and the roadway type for roadway lighting design, the facted an insufficiency maintenance factor to apply our the country conditions. The consideration of maintenance factors is not being fully applied for roadway lighting design in Korea. This paper consider optical characteristics and maintenance factors as well as LID of Luminaires in designing roadway lighting. Consideration of maintenance factors that are neme specified according to LDD(Luminaire Dirt Depreciation), LLD(Lamp Lumen Depreciation), AADT(Average Annual Daily Traffic) based on IESNA regulation. The analyzed optical characteristics are applied for stagger and cross roadway types with maintenance factors in the range of 0.51$\sim$1.00 and equipment factor of 0.9.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.211-213
• /
• 2005

최근의 위치 측위 기술과 무선 통신 기술의 발전에 따라 위치 기반 서비스에 대한 관심이 크게 증가하고 있다. 기존의 단일 노드 기반 시스템으로는 처리하기 힘든 휴대폰 사용자와 같은 대용량의 객체를 처리하기 위해 제시된 클러스터 기반 분산 컴퓨팅 구조로 GALIS 아키텍처가 제안되었다. 본 논문에서는 제시한 프로토타입은 그동안 구현된 기존 GALIS 프로토타입보다 개선된 구조로 SLDS에서 Global $Cell\_ID$를 적용하여 노드의 분할 합병 시 발생할 수 있는 처리 비용을 감소시켰다. 또한 LLDS에서는 필터링을 통해 손실들 수 있는 위치 데이타 정보를 보다 신뢰할 수 있는 데이타로 만들기 위한 기능을 추가하여 질의 시 발생할 수 있는 여러 가지 상황을 대비할 수 있게 되었다.