• 한국인터넷방송통신학회논문지
• /
• 제12권3호
• /
• pp.171-177
• /
• 2012

최근 복수개의 단말을 가진 사용자들이 끊김없는 연결성을 유지하기 위한 망 이동성 지원에 관한 연구가 진행되어 왔다. 본 논문에서는 LISP 구조에서 망 이동성 지원 스킴을 제안하였다. 제안된 스킴에서 모바일 라우터 접속 동안에 맵 서버에서 EID-to-RLOC 매핑 데이터베이스가 리프레쉬(refresh)된다. 또한 이동 망을 위한 자연스런(smooth) 핸드오프를 지원하기 위한 맵 갱신 방법을 제안하였으며, 성능 분석을 위해 제안된 스킴을 NEMO와 비교하였다.

• Journal of Communications and Networks
• /
• 제13권6호
• /
• pp.612-620
• /
• 2011

Recently, one of the problems with the Internet is the issue of scalability. To this end, locator/identifier separation protocol (LISP), which separates end-system identifiers and routing locators, has been proposed as a solution. In the LISP deployed network, the ingress and egress nodes of inter-AS traffic is determined by edge router selection (ERS) and endpoint identifier-routing locator mapping assignment (ERMA). In this paper, joint optimizations of ERS and ERMA for stub networks with and without predetermined link weights are studied and the mixed integer linear programming (MILP) formulations for the problems are given. To make the problem with optimizable link weights tractable, a revised local search algorithm is also proposed. Simulation results show that joint optimization of ERS and ERMA enables better network performance.

• Journal of Information Processing Systems
• /
• 제12권2호
• /
• pp.196-213
• /
• 2016

System Architecture Evolution (SAE) with Long Term Evolution (LTE) has been used as the key technology for the next generation mobile networks. To support mobility in the LTE/SAE-based mobile networks, the Proxy Mobile IPv6 (PMIP), in which the Mobile Access Gateway (MAG) of the PMIP is deployed at the Serving Gateway (S-GW) of LTE/SAE and the Local Mobility Anchor (LMA) of PMIP is employed at the PDN Gateway (P-GW) of LTE/SAE, is being considered. In the meantime, the Host Identity Protocol (HIP) and the Locator Identifier Separation Protocol (LISP) have recently been proposed with the identifier-locator separation principle, and they can be used for mobility management over the global-scale networks. In this paper, we discuss how to provide the inter-domain mobility management over PMIP-based LTE/SAE networks by investigating three possible scenarios: mobile IP with PMIP (denoted by MIP-PMIP-LTE/SAE), HIP with PMIP (denoted by HIP-PMIP-LTE/SAE), and LISP with PMIP (denoted by LISP-PMIP-LTE/SAE). For performance analysis of the candidate inter-domain mobility management schemes, we analyzed the traffic overhead at a central agent and the total transmission delay required for control and data packet delivery. From the numerical results, we can see that HIP-PMIP-LTE/SAE and LISP-PMIP-LTE/SAE are preferred to MIP-PMIP-LTE/SAE in terms of traffic overhead; whereas, LISP-PMIP-LTE/SAE is preferred to HIP-PMIP-LTE/SAE and MIP-PMIP-LTE/SAE in the viewpoint of total transmission delay.

• 한국측량학회지
• /
• 제11권2호
• /
• pp.89-100
• /
• 1993

본 연구는 CAD와 LISP(LIST Processing)을 이용한 도로노선 결정에 있어서의 토공량 산정에 관한 연구이다. 컴퓨터의 비약적인 발전과 산업분야에서의 이용증대는 CAD/CAM/CAE 기술의 발전으로 이어져 자동설계 및 자동제작을 가능케 하고 있으며 또한 토목설계의 자동화도 꾸준히 추진되어 오고 있는 실정이다. 이러한 자동화 작업의 일환으로 본 연구에서는 도로노선 결정시 각 노선의 토공량 산정을 자동화하여 토목설계업무의 효율성을 높이고자 하였다. 연구의 방법으로 지형도에 DTM(Digital Terrain Model) 개념을 도입하여 지형정보를 자동독취할 수 있도록 프로그램화 한 후 이 데이타를 가지고 LISP 언어를 이용하여 체계적인 알고리즘을 만든 후 CAD 시스템과 접목시켜 종·횡단 면적과 토공량을 산정해서 유토곡선을 출력하는 자동설계 시스템을 시험적으로 구축하는 데 그 목적을 두고 있다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.169-174
• /
• 2000

This paper is about automatic design of measuring master gears. Master gears are usually thought of as gears of extreme accuracy level, but are better defined as gages to check the meshing action of production gears. This is usually not recognized because most mechanical gages are associated with static measurements rather than having the form of machine elements used in a functional check involving machine motion. In this paper the interface that allows beginners to design easily and quickly is provided. The addition and modification of data is easy and the reduced design lead time is feasible with the program even though users don't know much about program since it is developed with Visual Lisp and DCL.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.422-427
• /
• 2000

Gear design carried in former type determined a few variables like module, pressure angle, helix angle. After investigating repeatedly results obtained through stress analysis and making a determination an optimal shape, but its design process was not only complex but also difficult to get a precise profile curve from operating by hand. In this study, rotating shape of gear profile curves were generated automatically with standard spur gear, equivalent helical gear, shifted gear & pinion by using developed program which is Auto_LISP language supported in Auto-CAD. Output tooth profile by using CAE program is applied as Preprocessor for stress analysis in each contact points. This program which can be determined rapidly an optimal shape of gear will be successfully supported for Small & Medium companies designing and manufacturing gears by using Auto-CAD.

• 소성∙가공
• /
• 제19권4호
• /
• pp.242-247
• /
• 2010

In the multi-pass shape drawing process, it is important to design the intermediate dies for producing sound products. Up to now, the design of the intermediate dies is mainly carried out by the industrial experts based on their experience. In this study, a design program was developed to design the intermediate dies for multi-pass shape drawing process. The program was programmed by using VisualLISP. In this program the intermediate dies can be designed by using the initial material shape and the final product shape. In order to verify the effectiveness, the program was applied to design the intermediate dies of multi-pass shape drawing for producing four teeth spline and gun slide. Finally, FE analysis and shape drawing experiment were performed to verify the effectiveness of the designed intermediate dies. As a result, it was possible to produce the drawn products with the required dimensional accuracy.

• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.701-716
• /
• 1998

In this paper we develop algorithms in programming lan-guage SCHEME for implementation of the main first order gradient techniques for unconstrained optimization. Implementation of the de-scent techniques which use non-optimal descent steps as well as imple-mentation of the optimal descent techniques are described. Also we investigate implementation of the global problem called optimization along a line. Developed programs are effective and simpler with re-spect to the corresponding in the procedural programming languages. Several numerical examples are reported.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.996-999
• /
• 2001

This study is the election of optimum forming condition for RP system using ADS. Program using ADS reduces the required time for feedback between design and manufacturing of workpiece. When we produce rapid prototype using RP system, we investigate the relationship between Facetres in system variable number of AutoCAD and circularity of rapid prototype, and we will find optimum forming condition in RP system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.753-758
• /
• 2008

A CAM program for forming design Automated of CAM for Spring using car was developed in this study. This program was written in AUTO LISP on the AUTO CAD system with a personal. An approach to the system is based on the kinemateic of the object function. We make a determination of an cam programming. A CAM spline is continuous in displacement. velocity and acceleration. This program which can design Coil Spring shapes will successfully support CAN designing and manufacturing for Small & Medium companies.