• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1002-1003
• /
• 2006

This research mainly focuses on the development of sinter brazing technology for improving the process related to belt pulley made by sinter hardening. As the machine process of belt pulley takes up more than half of the total manufacturing hours, we propose changing the process to pulley groove brazed and bonded with pulley disc by applying sinter brazing to belt pulley. With the new process, the belt pulley is expected to reduce manufacturing cost to 70% of the original process by applying the sinter brazing technology; and the belt pulley bound by sinter brazing only loses 10% bonding strength compared with the original process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.937-938
• /
• 2006

Tungsten heavy alloys with different ratios of Mo and Ni-Fe matrix were liquid-phase-sintered to investigate their microstructural evolution. Results indicated that increased Mo in the alloy promoted the formation of a (W,Mo)(Ni,Fe) type intermetallic compound in the furnace-cooled condition. It was a monoeutectic reaction when the added Mo content was higher than 49at.%, or a eutectic reaction when this value was between 37at,% to 49at.%. When Mo was added between 25at.% to 37at.%, the precipitation of the intermetallic compound took place by either a eutectoid or peritectoid reaction.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.779-786
• /
• 2011

This paper presents a soft switching converter to achieve the functions of zero voltage switching (ZVS) turn-on for the power switches and dc voltage step-up. Two circuit modules are connected in parallel in order to achieve load current sharing and to reduce the size of the transformer core. An active snubber is connected between two transformers in order to absorb the energy stored in the leakage and magnetizing inductances and to limit the voltage stresses across the switches. During the commutation stage of the two complementary switches, the output capacitance of the two switches and the leakage inductance of the transformers are resonant. Thus, the power switches can be turned on under ZVS. No output filter inductor is used in the proposed converter and the voltage stresses of the output diodes is clamped to the output voltage. The circuit configuration, the operation principles and the design considerations are presented. Finally, laboratory experiments with a 340W prototype, verifying the effectiveness of the proposed converter, are described.

• Structural Engineering and Mechanics
• /
• v.22 no.2
• /
• pp.241-262
• /
• 2006

NiTi-wire shape memory alloy (SMA) dampers, that utilize NiTi SMA wires to simultaneously damp tension, compression and torsion, was developed for structural control implementation in this study. First, eight reduced-scale NiTi-wire SMA dampers were constructed. Then tension, compression and torsion experiments using the eight reduced-scale NiTi-wire SMA dampers of different specification were done. The experimental results revealed all of the eight reduced-scale NiTi-wire SMA dampers had the ability to simultaneously supply tension-compression damping and torsion damping. Finally, mechanics analysis of the NiTi-wire SMA dampers was done based on a model of the SMA-wire restoring force and on tension-compression and torsion damping analysis. The damping analytical results were found to be similar to the damping experimental results.

• Smart Structures and Systems
• /
• v.11 no.4
• /
• pp.387-410
• /
• 2013

This paper deals with the damage assessment for isolators of base-isolated building systems considering the torsion-coupling (TC) effect by establishing damage indices. The damage indices can indicate the reduction in lateral stiffness of the isolator story as explicit formulas in terms of modal parameters. In addition, the damage location, expressed in terms of the estimated damage index and eccentricities before and after damage, is also presented. Numerical analysis shows that the proposed algorithms are applicable for general base-isolated multi-story TC buildings. A procedure from the analysis of seismic response to the implementation of damage indices is demonstrated by using a numerical case. A system identification technique is employed to extract modal parameters from seismic responses of a building. Results show that the proposed indices are capable of detecting the occurrence of damage and preliminarily estimating the location of damaged isolator.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.784-786
• /
• 2003

패스워드 기반 키 교환 프로토콜은 참여자들이 쉽게 기억할 수 있는 자신의 패스워드를 사용하므로 단순성, 편리성, 이동성의 장점 때문에 광범위하게 사용된다. 2000년에 Lin, Sun, Hwang［1］이 Steiner, Tsudik, Waidner［2］가 제안한 three-party EKE 프로토콜(STW-3PEKE)이 패스워드 추측 공격에 취약함을 증명하고 이를 개선한 서버의 공개키를 이용한 새로운 three-party EKE 프로토콜(LSH-3PEKE)을 제안했다. 2001년에는 Lin, Sun, Steiner, Hwang［3］이 서버의 공개키를 사용하지 않는 새로운 three-party EKE 프로토콜(LSSH-3PEKE)을 제안했다. 본 논문에서는 검증자(verifier) 기반 즉 서버가 사용자의 패스워드를 저장하지 않고 패스워드에 의해 생성되는 검증자를 가지는 프로토콜을 제안하며 이전에 제안한 프로토콜의 안전성을 그대로 유지하면서 좀 더 간단하며 효율적인 프로토콜을 제시한다.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.234-240
• /
• 2011

Electrically tunable focusing liquid crystal (LC) lenses are reviewed in this paper. The distribution of the orientations of LC directors which is controlled by electric fields results in a distribution of refractive indices of LC directors. The incident light can be modulated by the electrically tunable lens-like phase difference of the LC lens. We introduce the basic operating principles of LC lenses and discuss the structures of LC lenses. The major challenges of LC lenses are also discussed. We believe this paper provides a guideline for basic understanding of LC lenses.

• Safety and Health at Work
• /
• v.2 no.4
• /
• pp.380-384
• /
• 2011

The chronic and acute effects of hyperglycemia affecting cognition and work are as important as those of hypoglycemia. Its impact, considering that majority of diabetic patients fail to reach therapeutic targets, would be potentially significant. Self monitoring of blood glucose, recognition of body cues and management interventions should be geared not only towards avoidance of disabling hypoglycemia, but also towards unwanted hyperglycemia. Over the long term, chronic hyperglycemia is a risk for cognitive decline. Acute episodes of hyperglycemia, above 15 mmol/L have also been shown to affect cognitive motor tasks. Maintaining blood sugar to avoid hyperglycemia in diabetic workers will help promote safety at work.

• Archives of Pharmacal Research
• /
• v.27 no.7
• /
• pp.727-729
• /
• 2004

A new cycloartane glycoside was isolated from the dried whole herbs of Camptosorus sibiricus Rupr By means of chemical (hydrolysis) and spectroscopic methods (IR, 1D, and 2D NMR, ESI-MS), the structure was established as $3{\beta}$, $7{\beta}$, $24{\beta}$, 25, 30-pentahydroxycycloartane-3-O-${\beta}$-D-glucopyranoside-24-O-${\beta}$-D-glucopyranoside (1).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1566-1582
• /
• 2019

Silent Data Corruptions (SDCs) is a serious reliability issue in many domains of computer system. The identification and protection of the program instructions that cause SDCs is one of the research hotspots in computer reliability field at present. A lot of solutions have already been proposed to solve this problem. However, many of them are hard to be applied widely due to time-consuming and expensive costs. This paper proposes an intelligent approach named SDCPredictor to identify the instructions that cause SDCs. SDCPredictor identifies SDC-causing Instructions depending on analyzing the static and dynamic features of instructions rather than fault injections. The experimental results demonstrate that SDCPredictor is highly accurate in predicting the SDCs proneness. It can achieve higher fault coverage than previous similar techniques in a moderate time cost.